Rebuildable Tank Atomizers - An Anthology, Pictorial, Builds and Reviews.
- Thread starter sedge
- Start date
- th_trl_thread_readers 0
- Status
BTW, just as a heads up, the list for the second batch of The NextGen by VapeWare mods is going up tomorrow and then a few days later.
You have to be a member of their group, and while they aren't adding people right now because the first list id about to start, they might open it up before the second.
While this is a Genesis Atomizer, it definitely has a partial place here. It's a genny that works with a vacuum, to draw the juice to up the mesh wick. It's a pretty innovative and stunning piece of kit.
THE WGU CLUB
Card Carrying Member/Co-Founder
You have to be a member of their group, and while they aren't adding people right now because the first list id about to start, they might open it up before the second.
While this is a Genesis Atomizer, it definitely has a partial place here. It's a genny that works with a vacuum, to draw the juice to up the mesh wick. It's a pretty innovative and stunning piece of kit.
THE WGU CLUB
Card Carrying Member/Co-Founder
@dems86 I'm enjoying the B deck too, been experimenting with different wicking/coil placement.
I'm currently ignoring the little slots on the side meant for lining up the coil at the moment. Instead have the coil aligned more centrally between the juice holes on the side, split the cotton tails each side in half, and tuck each piece in to cover a hole.
I honestly don't know why they didn't add a second pair of notches on the deck for that coil layout anyway.
I'm currently ignoring the little slots on the side meant for lining up the coil at the moment. Instead have the coil aligned more centrally between the juice holes on the side, split the cotton tails each side in half, and tuck each piece in to cover a hole.
I honestly don't know why they didn't add a second pair of notches on the deck for that coil layout anyway.
Vakaion, why do you have to be such a rebel? First you ignore the notches, next the Four Horsemen show up to bring on the end of days.@dems86 I'm enjoying the B deck too, been experimenting with different wicking/coil placement.
I'm currently ignoring the little slots on the side meant for lining up the coil at the moment. Instead have the coil aligned more centrally between the juice holes on the side, split the cotton tails each side in half, and tuck each piece in to cover a hole.
I honestly don't know why they didn't add a second pair of notches on the deck for that coil layout anyway.
How is that working btw? Seems like a central coil doing the split would make pretty good sense, all you need to do really is block the four holes without packing the cotton too tight so ... not to restrict the juice flow. Does it seem to work better than the SQ technique from the PR photos?
THE WGU CLUB
Card Carrying Member/Co-Founder
Hehe, I had a feeling you might like it
THE WGU CLUB
Card Carrying Member/Co-Founder
I hate it for some reason
Haha what can I say? I'm a non-conformist!
I actually got the idea from a video of someone setting up a mesh build on the B deck. It's working well! I like the idea as it basically means all four juice holes have a more direct line to the coil, instead of 2 of those holes just soaking the tail-end of an already juiced wick on the original method.
As to whether it's better? With the juice I'm vaping at the moment it's a little hard to tell (menthol for daaaaaaaaaaaaays lol) but it's definitely not worse.
Basically I see this way as a slight trade-off. The coil is a little more difficult to fit in some ways (not using the deck slots, most likely need to wrap coil legs the opposite way around the post screws if using spaced coils), but easier in others (coil ends are further from posts giving more room, wick is easier to tuck in).
42 attys, 38 mods, some thus get neglected. Besides, I have a few which are more satisfying than the others.
It was a bunch of UK threads back after people kept asking how many he would be releasing on initial launch. I'm almost positive he said "a bunch." People kept asking and he said like "50 or so" 
I wa
Yeah. He what you call a "whale" of the vapers. No wonder he gets into every beta test The mod maker ask if Qorax is familiar with their product and he says " Yes, I own them all, but the one I want to beta test. Then I'll probably own that one too" 
I waYeah. He what you call a "whale" of the vapers. No wonder he gets into every beta test
The mod maker ask if Qorax is familiar with their product and he says " Yes, I own them all, but the one I want to beta test. Then I'll probably own that one too"
I'm going to assume that first part was in reply to my or someone else's post about the number Pete INTENDED to sell yesterday? lolIt was a bunch of UK threads back after people kept asking how many he would be releasing on initial launch. I'm almost positive he said "a bunch." People kept asking and he said like "50 or so" [emoji23] I wa
Yeah. He what you call a "whale" of the vapers. No wonder he gets into every beta test
THE WGU CLUB
Card Carrying Member/Co-Founder
Last edited:
*RTA. Bottom mounted Tank. Deck like a Dripper ~ access it also as you'd on a Dripper.
*2.4mm and above Macrocoil with Cotton/Rayon rules.
*Designed for Sub-Ohming.
*Easy to rebuild and rewick.
*Superior flavor and Vapor production.
*Unique RBA (no other similar product exists).
*My Beta Test report submitted.
Modder: I hinted a few posts back
*2.4mm and above Macrocoil with Cotton/Rayon rules.
*Designed for Sub-Ohming.
*Easy to rebuild and rewick.
*Superior flavor and Vapor production.
*Unique RBA (no other similar product exists).
*My Beta Test report submitted.
Modder: I hinted a few posts back
Out f curiosity, what is your definition of "a few"?*RTA. Bottom mounted Tank. Deck like a Dripper ~ access it also as you'd on a Dripper.
*2.4mm and above Macrocoil with Cotton/Rayon rules.
*Designed for Sub-Ohming.
*Easy to rebuild and rewick.
*Superior flavor and Vapor production.
*Unique RBA (no other similar product exists).
*My Beta Test report submitted.
Modder: I hinted a few posts back
THE WGU CLUB
Card Carrying Member/Co-Founder
10 pages back at 10 posts a page, as a heads up to those interestedAbout 3-4 pages back I guess
THE WGU CLUB
Card Carrying Member/Co-Founder
In Tapatalk settings, lol
I haven't checked out too much of the web side of things except for a couple quick jaunts. If someone else can't chime in I'll take a lookey-loo
THE WGU CLUB
Card Carrying Member/Co-Founder
- Status
Similar threads
- Locked
