Doesn't it have the af inserts? Seems like I saw one I would be happy with, it's on my maybe list.
Iforgot to check
The inside af was 2 small holes.The more I use it the more I'm liking it the way it is. Draws like a cigarette
How big are your batches? Mine are roughly 300 to 500 ml, depending on how much the target nic is. Someone also suggested using an Aeroccino, although the max batch is 250ml (a cup) and I guess it would get a lot of air. You can do it cold, and with the smallest frother... My ejuice mixes well for the moment!
https://www.amazon.com/dp/B077PSC44...&pd_rd_r=4f3378e1-3b26-11e9-accd-19068f92f127
These could work inside a bottle!!!
These could work inside a bottle!!!
Iforgot to check
Is that the mini?
Last edited:
It depends... if I am making a single bottle, I’ll use plastic, a big batch, I use 120 ml glass amber Boston bottles. Reason being, I feel better about longer term storage in glass, it’s heavier and less risk of tipping while I’m adding ingredients, but mostly for the wider opening, easier target.
I have this one
https://www.amazon.com/dp/B00RD8ZPS...rother+norpro&qid=1551348524&s=gateway&sr=8-4
Do leave quite a bit of room in the bottle though! It’ll increase the volume around 20-30%. But yeah, that’s one of the best mixing tips I ever got.
my artery PAL II has shipped...less than 12 hours after i ordered it. ecigone have never given me a problem.
my FT order however...ETA dates more mixed up than a 10000 piece jigsaw being transported by moped on dirt roads.
my FT order however...ETA dates more mixed up than a 10000 piece jigsaw being transported by moped on dirt roads.
Hi everyone, long time no see. Woke up B4 the alarm this morning. Gotta get moving now, but wanted to drop in and say hi. All is well with me, just been very busy. Have a good day everyone!!!!
I thought that's what it was..
Those don't have airflow inserts. Only the full size Hastur has them.. just an FYI so your not thinking your missing something..
Authentic Hastur MTL mini from Cthulhu
Last edited:
@Punk In Drublic Alternatively, one could just tape the bottles to the washing machine. I’m looking into a more permanent solution, but for now tape works fine.
Last edited:
Morning all,
Had a much needed bottle cleaning episode last night, now have over 15 bottles drying off. So it looks like a mammoth mixing session is due very soon.
Dug out my Serpent Elevate last night, recoiled it identically to the Kylin. Same wick. Same juice. Same mod. Same temperature. Same airflow. Totally different vape, and not in a good way, no real flavour or body. I might as well just toss a coin, some days it is superb, some OK, some meh. Today is definitely meh.
I really like the Kylin, out of all my tanks it is the one I have found to have the most consistent flavour. It does, however, dribble and leak intermittently from the bottom. Never enough to cause major issues, but enough to demand carrying spare tissues to wipe down the Aegis periodically. Might try rewicking it with cotton rather than rayon and see if that fettles it. Or relocating it to the Topside so a soggy 510 is not an issue.
Anything will be an improvement over the Tinker. It just hurts my eyes looking at that mod. I've heard rumours that every ugly tree has now died due to lack of branches and the environmentalists are deeply concerned
Had a much needed bottle cleaning episode last night, now have over 15 bottles drying off. So it looks like a mammoth mixing session is due very soon.
Dug out my Serpent Elevate last night, recoiled it identically to the Kylin. Same wick. Same juice. Same mod. Same temperature. Same airflow. Totally different vape, and not in a good way, no real flavour or body. I might as well just toss a coin, some days it is superb, some OK, some meh. Today is definitely meh.
I really like the Kylin, out of all my tanks it is the one I have found to have the most consistent flavour. It does, however, dribble and leak intermittently from the bottom. Never enough to cause major issues, but enough to demand carrying spare tissues to wipe down the Aegis periodically. Might try rewicking it with cotton rather than rayon and see if that fettles it. Or relocating it to the Topside so a soggy 510 is not an issue.
Anything will be an improvement over the Tinker. It just hurts my eyes looking at that mod. I've heard rumours that every ugly tree has now died due to lack of branches and the environmentalists are deeply concerned
Gloomtem mech for 150 USD and Gloomtem mosfet for 190 USD up for sale.
Tempting, but I hate the way it looks. I think shinyitis is making me want to buy it just for likes and upvotes.
Tempting, but I hate the way it looks. I think shinyitis is making me want to buy it just for likes and upvotes.
When you say Oscar, are you talking about the mini food processor?
Similar threads
- Locked
