Shinyitis Support Group

[Pigs]

Here's another option - I ordered it last week due to the dual airflow, amazing flavour, shinyitis, the airflow options it has and mainly again shinyitis

$24.95 ULTON Tripod Styled RTA Rebuildable Tank Atomizer - 2ml / stainless steel + glass / 22mm diameter at FastTech - Free Shipping

It's a clone of Atmizoo's Tripod rta. Internal airflow id is 4mm, it comes with MTL inserts of 1.0mm/1.2mm/ 1.5mm/1.8mm. It also comes with a mtl chamber reducer of 3mm id. Without the chamber reducer the chimney it is 5.2mm id.

It's 2ml as is, or you can get bubble glass to increase it to 3.5ml
3PCS Atmizoo Tripod rta 22mm tank Bubble Glass Tube Fatboy Replacement [FT090x3]$7.99

If you'd rather go taller, there's an extender available which brings it to 3.4ml:
$5.53 ULTON Replacement Extension Kit for Tripod Styled RTA - 3.4ml at FastTech - Free Shipping This fits the Ulton version, and the cheaper version listed below.
and there's also bubble glass available for that's which gives you a tall fat 5ml Tripod rta
2PCS Atmizoo Tripod rta 22mm tank Rainbow Bubble Glass Tube [VT1201x2]$7.49

FT has a cheaper clone, which also has good reviews:
$12.85 Tripod Styled RTA Rebuildable Tank Atomizer - 2ml / 316 stainless steel + glass / 22mm diameter at FastTech - Free Shipping
View attachment 894235

Shoot. Should I get this or the Dvarw clone? can't do both...or can I? hmmm I used to be indecisive but I'm not sure if I am anymore

 

[Bigbob2322]

Good morning shiners I hope everyone is enjoying the day off today.

 

[Pigs]

Morning folks,barely 2 hours of sleep...on my 3rd espresso while browsing ECF.

We leave in an hour,kinda worried,first time my pops goes thru the whole radiotherapy thing,hope it all goes well.

Since i have to wait for a long time for him to get the radiotherapy done I'm making sure i got fresh batteries and a lot of juice

All the best mate. Hope your dad's treatment isn't too hard on him.

 

[chanelvaps]

I agree with you and when I started I bought fa exclusively. It's only recently I've decided to branch out into trying other brands.....I'm still heavily biased though. It's more about mixing the same flavour nuances....I have the common strawberry tasting problem for example.

Some of their fruits are terrible faders too.

I started with all TFA in 2012 because I was following a thread that promoted the use of it. And I was a newbie. Collected almost all of the flavors. My DIY sucked. I switched to almost all FA, also following HIC's stuff. Did this for about 2-3 years. Some INW and CAP thrown in always. Now I am leaning towards growing my collection of Flavorah. My current fav. Now when I see a recipe I like that has other things (VT, JF Chem etc) I scroll on past. NOT investing in another brand.

 

[Pigs]

Here's the recipe @DeloresRose and for anyone else who's interested...I called it Harvest Sunrise Cream.

Bavarian cream (TFA) 2%
Fresh cream (fw). 2%
Dragonfruit (Cap). 2%
Juicy peach (Cap). 4%
Sweet strawb (Cap) 3%
Apricot (Cap). 2%
Raspberry (Cap). 2%
Harvest berry (Cap). 2%

Thanks Charlie. Gonna give that a whirl

 

[Javichu]

Well today was a bust...due to my pops enlarged prostate they couldn't start the radiotherapy.

So...now they gotta get the specialist together and see how to proceed,if he would have started today it would have been only 20 sessions but due to the prostate thing he is going to probably get 28 or 30 sessions total...

Oh well,think I'm going to look for some vaping apparatus today,don't really need anything but i gotta get my mind off this situation.

Always wanted to try a mesh,love the way the long wide metal looks when it's all red,heard good things of the Zeus X Mesh,might look around and see if i can find a cheap one.

 

[Pigs]

T

Well today was a bust...due to my pops enlarged prostate they couldn't start the radiotherapy.

So...now they gotta get the specialist together and see how to proceed,if he would have started today it would have been only 20 sessions but due to the prostate thing he is going to probably get 28 or 30 sessions total...

Oh well,think I'm going to look for some vaping apparatus today,don't really need anything but i gotta get my mind off this situation.

Always wanted to try a mesh,love the way the long wide metal looks when it's all red,heard good things of the Zeus X Mesh,might look around and see if i can find a cheap one.

This is in Spain

Build Deck MESH ZEUS X RTA base - Geekvape in Europe and Spain

EDIT: Looks like that is the deck only. If you have the rta already it should be ok.
Otherwise - https://www.heavengifts.com/product/GeekVape-Zeus-X-Mesh-RTA.html

 

[Javichu]

T

This is in Spain

Build Deck MESH ZEUS X RTA base - Geekvape in Europe and Spain

EDIT: Looks like that is the deck only. If you have the rta already it should be ok.
Otherwise - https://www.heavengifts.com/product/GeekVape-Zeus-X-Mesh-RTA.html

Thanks for the links buddy,will give it a looksie.

cheers

 

[DeloresRose]

Here's the recipe @DeloresRose and for anyone else who's interested...I called it Harvest Sunrise Cream.

Bavarian cream (TFA) 2%
Fresh cream (fw). 2%
Dragonfruit (Cap). 2%
Juicy peach (Cap). 4%
Sweet strawb (Cap) 3%
Apricot (Cap). 2%
Raspberry (Cap). 2%
Harvest berry (Cap). 2%

You'll have to put it through your own calculator to suit your nic levels etc.

It's great off the shake but the Bavarian cream needs a steep. To be honest it's so new to me I don't know what's going to happen in time but I hope that the fruits don't fade too much because it surely is delicious at the moment after just one day's steeping

I hope you enjoy it sweetie

Thank you kindly!

 

[DeloresRose]

Off to bed folks.
Tomorrow pops starts his radiotherapy,20 sessions...so almost a month of having to bite my tongue and put up with his bad mood,but family is family,am i right?

As usual it's a been a pleasure to share this time with you folks,cya all tomorrow

When my husband did radiation, his worst side effect was fatigue. He was so tired he couldn’t eat. He did ten days of it for body mets, five days for the brain met. As he finished up those brain treatments his hair fell out. Otherwise it was much less dramatic than chemo. He had gamma knife later too, and didn’t seem to have any side effects from that at all. I did though, fainted when I saw the bill for $51K - it had been billed wrong and the insurance denied it. It did get it sorted out but holy cow...

Wishing you both the best.

 

[Javichu]

When my husband did radiation, his worst side effect was fatigue. He was so tired he couldn’t eat. He did ten days of it for body mets, five days for the brain met. As he finished up those brain treatments his hair fell out. Otherwise it was much less dramatic than chemo. He had gamma knife later too, and didn’t seem to have any side effects from that at all. I did though, fainted when I saw the bill for $51K - it had been billed wrong and the insurance denied it. It did get it sorted out but holy cow...

Wishing you both the best.

Thanks for the kind words Delores and i hope your husband is doing better now.

In our case they said my pops would probably feel nausea since the radiotherapy is only directed to his pelvic area,but yeah when you go waist up with radiotherapy that is when it gets worst.

And dang,51k bill? wow yeah i would have fainted too,here although it works differenty.
Here even with private care you don't pay bills,back when i was working as a solicitor i did have private healthcare and the hospital takes care of everything.

Name is in the computer so even if it's an emergency thing like you broke a leg and need to get surgery they will put you in right away but you never get a like a ''physical'' bill.

 

[charlie1465]

I started with all TFA in 2012 because I was following a thread that promoted the use of it. And I was a newbie. Collected almost all of the flavors. My DIY sucked. I switched to almost all FA, also following HIC's stuff. Did this for about 2-3 years. Some INW and CAP thrown in always. Now I am leaning towards growing my collection of Flavorah. My current fav. Now when I see a recipe I like that has other things (VT, JF Chem etc) I scroll on past. NOT investing in another brand.

I know it just gets out of hand if you try and keep up. In that instance I try and think about a useful substitute and if not I may scroll on or leave it out altogether.

Hope you're doing well sweetie.

 

[charlie1465]

Thank you kindly!

You're welcome

 

[SlowTalker]

Efun has the Ehpro x AmbitionZ Vaper Cold Steel 100 Mod 120W in grey for $36.29

Ehpro x AmbitionZ Vaper Cold Steel 100 Mod 120W

 

[chanelvaps]

I know it just gets out of hand if you try and keep up. In that instance I try and think about a useful substitute and if not I may scroll on or leave it out altogether.

Hope you're doing well sweetie.

doing great Charlie, kitten season is her so as usual I am trapping wild kittens like a mad women and dragging them home to my new house. I said I would not do that here at this new house and I can still see my daughters face when she came over and saw the spare bedroom filled up with cat cages full of kittens. I just cannot stand knowing there is hungry helpless little kitties out there. I wish people would learnto spay and neuter.
I hope you are doing great too Charlie. I am making recipes from freshpies after I heard you mention them.

 

[ShowMeTwice]

Bookmarked. TY

I also found a Dvarw with a 2.2mm insert (my sweet spot)--I just don't know who makes it and if it's' any good--but reviews are all 5 stars:
Buy Dvarw V2 Style MTL RTA Silver Atomizer w/ Spare Tank + Airflow Kit

And now there are new Dvarws Facelift, with upgraded decks, and even (arriving soon) 24 mm Dvarw RTA DL Facelift with 2.5 and 3 mm inserts:

Buy SXK Dvarw DL FL Style RTA 24mm Rebuildable Tank Vape Atomizer

Things are looking up.

The first one at 3Fvape looks good to me and includes your range of AF inserts. It's the Dvarw v1, if you will, I have 4 (2 clones & 2 OG's). They're very nice.

The Dvarw DL FL 24mm has a 2x2.5mm AF installed by default (clone and real). KHW Mods does sell individual inserts and they do have a 2.5mm insert. AF inserts from the MTL FL's will not work in the DL FL.
DL FL deck...2x2.5mm insert...thinking that's more than what ya want.

If you got the Dvarw MTL FL plus these AF inserts and installed the 2x1.2mm that would get you to your Happy place Dear.

Moving on... the Tripod RTA is fantastic. I understand your AF range. I have two of the real deal Tripod's. With the 1.8mm AF insert installed it is considerably more airy than my Kayfun Prime set at 1.8mm or 2mm AF. So, what to say??? I suspect that is due to the dual slotted airflow ring. My Kayfun's are only single AF.

Another one I love is Crafter's Den Pocket RTA v2. It has an AFC ring, like we know and love. There are 3 settings... 3mm, 2mm and 1mm (MTL to RDL). I set the AFC ring so it's on part of the 2mm/3mm which gives me ~2.5mm.

Hope that helps.

 

[ShowMeTwice]

Shoot. Should I get this or the Dvarw clone? can't do both...or can I? hmmm I used to be indecisive but I'm not sure if I am anymore

Get them both mate.
You already indecisively know you want both, decisively.

 

[TrollDragon]

Steam Crave has a squonkable Velocity deck out now for the Plus V1/V2.

https://shop.steamcrave.com/plusvelocitydeck_p0961.html

 

[ShowMeTwice]

Thank you so much Ange! The link you sent goes to some Clapton coils that do not look like the pic you sent. Trying to stay away from claptons and just want single wire like the pic you sent) fast ramp up time for single battery. but THANK YOU!

These ???

$2.61 Authentic VOOPOO PnP-RBA Prebuilt Coil - 0.6ohm / designed for VOOPOO PnP-RBA Coil / 10pcs/pack at FastTech - Free Shipping

 

[chanelvaps]

These ???
View attachment 894287
$2.61 Authentic VOOPOO PnP-RBA Prebuilt Coil - 0.6ohm / designed for VOOPOO PnP-RBA Coil / 10pcs/pack at FastTech - Free Shipping

YES! and thank you love~