Hi Delores. Sorry to hear that your daughter and BF haven't been well but seems likely he's got the same as she had and will test negative too.
Please keep lurking as I miss you when you're not around. Speak soon sweetie
Please keep lurking as I miss you when you're not around. Speak soon sweetie
It doesn't spin like with the OG. It hasn't been an issue with my FL. There really isn't room to move the coil too much, horizontally, in either OG or FL without possibly touching the posts.
With the FL I just make sure the coil is nicely lined up with the juice ports before wicking and installing the chimney.
Another (borrowed Rob pic)...
Oh yeah, don't know if you know... lube up the o-ring on the top of the little top cap that goes on the chimney. Some folks did not do that and when they went to refill their tank that little cap stayed attached to the tank section.
I am betting you knew this though. Sorry if that's the case.
I concur.
@Katya and @Opinionated and, and, and @AngeNZ ---> spill the beans Ladies!
I know Kat's list is kind of like the shifting sands of time.
On/off/maybe/research/on again/further research/off again/back on ... has my head spinning like that gal from the Exorcist.
iMa jus teasin' ya Kat
Look closely in her hand ... a vape!!!
What kind??? And does it need to be on my list.
Dwarv, Haar, Ares v2, and there was something else unless I took it back out... I'll have to go through and check.
I just got the coppervape project x in the mail and if I really like it I'll get another, but I'm not going to have much time with it to decide because it took 7 very long weeks to get here...
ETA:
The sxk Nibiru.. that airflow may be slightly tight but it'll be fine for hubs..
There was something else I added and took out, that I'm going to have to figure out what it was again because I decided to put it back in, because I got distracted and forgot what earlier. Lol
Last edited:
Morning shinies
Trust me, I thought the same. 810 DTs always get removed straight away and put into my "free to a good home" box
As for the RTA - absolutely love the airflow and flavour. Settled for the airflow half open, a 2.5mm id baby flat wire coil with 4mm legs (TY @Letitia ) and it's perfect
So this is your Juggerknot.
Trust me, I thought the same. 810 DTs always get removed straight away and put into my "free to a good home" box
As for the RTA - absolutely love the airflow and flavour. Settled for the airflow half open, a 2.5mm id baby flat wire coil with 4mm legs (TY @Letitia ) and it's perfect
also have this gauge, just haven't tried it yet
$2.34 Authentic MKWS Kanthal A1 Ribbon Heating Wire - 0.2mm*0.8mm flat size / 30ft (10m) at FastTech - Worldwide Free Shipping
Hey Ange did you ever try that? What did you think of that size?
Nighty night guys.... I'll see you in the wee small hours or a bit later I hope....if that makes sense
@Robfisher has an alien coil that specifically was designed for his Dvarw's called the fisher coil made by a company called PC Coils from Belgium but hopefully he'll comment as he know better than I.
The new deck certainly looks easier to install an exotic on with the retaining design because that's my one grumble about the Dvarw.....coil installation can be a real pia.
It's become my favourite tank though and the draw on the DL is perfect for me with awesome flavour.
Hope this helps
I sure did! And yes the FL has a lot of improvements including the post changes. I still love my OG DVarw DL's and can pop a new coil in with ease... I have done it enough times. I just rest my fingernail against the post with the coil leg between my nail and post and tighten... Bazinga! The Fisher Alien is available in Belgium from PC Coils and South Africa from The Coil Company. I tested a lot of coils before settling on this setup... and I fire it at 28 watts!
@ShowMeTwice the airflow is the one thing that feels slightly different between the OG and the FL. The standard airflow is very similar with the standard air plugs they both come with. I have the full set of airflow plugs on the way because when the final production version was released they weren't ready and I thought I would be happy with the standard plug... but I do need to play with the various options.
The airflow is the one thing that changed in from the beta versions I tested... the beta version felt turbulent... and the production version is smooth again!
@Robfisher I am amazed at how quiet the Dvarw MTL FL is. It is by far the quietest RTA I have. Simply brilliant.
Dear Daniel, what happened to Wednesday??? She scare you???
Hmmm... amused... apparently you couldn't handle her.
View attachment 897941
I'm betting you are saving Wednesday for that special One.
Wow, your stately red/gold Brunhilde is a stunner. The Queen of Brunhilde's!!!
I know a puuurfect name for her, Wednesday.
She is a pretty girl
She's a little bit too dainty for WednesdayAnother one will proudly take the name though, I just need to get the this Bloody Brunhilde
I didn't know that about lubing the o ring so thanks for the tip!There really isn't room to move the coil too much, horizontally, in either OG or FL without possibly touching the posts.
Oh yeah, don't know if you know... lube up the o-ring
As for coil angle I'm not sure I agree. In this dodgy diagram/photo
you can see that the red line is my current angle and the blue is another possibility. The more extreme the angle (red or blue) the more coil wraps you can fit without having to bend the coil legs back inwards 
I'm very likely going to pickup a Dvarw DL FL.
Loving my Dvarw MTL FL. Flavor is supremely awesome. I still need to try a couple of the more open AF inserts I bought specifically for an airier MTL and for RDL.
On my v1 MTL Dvarw's I am able to get a 26/36 316L clapton installed. It is tight but doable. KHW changed the design of the deck on the FL's to better attach, and grip, our coils.
FL improvements: KHW info copied is a combo of DL and MTL FL's.
1. Mech safe 510 insulator
2. Shorter than V1
3. PEEK chimney
4. Offset posts
5. Improved coil leg clamps. Ridge on the edge.
6. 22mm glass tank section (available separately); 24mm DL
7. MTL largest optional airhole is 2x2mm (=2,83mm) (available separately)
....DL has default 2×2.5mm air insert
8. Easier bottom fill (fewer turns of the tank section)
9. Viton o-rings
10. 22mm and 24mm MTL; 24mm DL
11. Fixed position chimney
12. Engraved AFC inserts (1×1,2mm is MTL stock and comes with a deck)
13. Shorter chimney, smaller chamber
14. Airflow is optimized
From @Robfisher's SA forum Borrowed his pic's. Will return them when done.
View attachment 897997
Coil posts are now offset. Along with improved coil leg clamps.
View attachment 897999
Pretty sure that's a 2.5mm Ni80 nano alien 3*29/38 0.4Ω
View attachment 898007 <--- from his post
He has many more photos there. ( @AngeNZ )
Only question I have: Is the airflow more restricted on the Dvarw DL FL with the default insert, as some have said, or the same as the v1's. Hoping Rob will address that seeing as he beta tested the FL's and knows better than most the differences between the two.
TIA
Ok, y'all convinced me to get a clone of the Dwarv DL FL. Does this look like a good one?
$23.50 SXK Dvarw DL FL Styled RTA Rebuildable Tank Atomizer - 6ml (24*21mm (OD*ID)) / 316 stainless steel + glass / 24mm diameter at FastTech - Free Shipping
Figured I'd order a couple and forget about them with shipping being a mess right now.
My Big dual coil girl is named My Valkyrie and thanks to SMT I've now given all the MTL's a name
Monday, Tuesday, Thursday, Friday, Saturday and Sunday
Oh, Daniel.... Similar threads
- Locked
