Shinyitis Support Group

charlie1465 · Jul 24, 2020

Good morning shinies :wub:

It's a very early one but I'm trying to get some more shut eye on the sofa.

Think I've decided to get another couple of Dvarw DL FL's along with some Fisher aliens. I've got to make the coil placement easier. I might go for the Haar too after that review sounds like a must have

AngeNZ · Jul 24, 2020

Opinionated said:
Hey Ange did you ever try that? What did you think of that size?

Yeah I eventually did. I still preferred this one:
$2.28 Authentic MKWS 316L Stainless Steel Ribbon Heating Wire - 0.14mm*1.0mm flat size / 30ft (10m) at FastTech - Free Shipping
over the 0.8x0.2mm, as it was just a smidge faster to ramp up at 20watts. But if I hadn't tried the 1.0x0.14mm first? Then I would've been happy as Larry with the 0.8x0.2mm :wub:

ShowMeTwice · Jul 24, 2020

gsmit1 said:
i got mine at VAPINART , but I'm thinking you're probably not in the states. It ain't dirt cheap, but if you fancy a very smooth and flavorful rdtl style of rta it's a future proof keeper.

I'm in the states. Thanks for the VapinArt link. Saves some $ versus getting one from Europe.

Redbird11 · Jul 24, 2020

Redbird11 said:
I ordered from My Freedom Smokes and received it in less than a week. Ended up being about 52 bucks with a coupon code including shipping. I don't know if you would be interested, but I thought I would let you know.

I meant to say that I ordered 2 tanks for 52 bucks. Not just one. That would be very expensive.

AngeNZ · Jul 24, 2020

Katya said:
I've been meaning to ask you about that drip tip for a long time. I love it. Talk to me!

this is gonna take ages to type :lol:

AngeNZ · Jul 24, 2020

Aliraonz said:
No one wants to say it but....it will make the brunhilde look not so hmmm tall and mighty

That one looks pretty and tiny or not hmm. Top dual airflow? single or dual coils?

This is very much NOT MY photo :lol:

but yes, it does make Monday look a smidge shorter

The Juggerknot mini clone is as you said, top air dual-sided airflow. It's a single coil deck only. Airflow ranges from tight RDL to loosely goosey RDL.

I found it easy to slap a coil in, and loved how my smaller 2.5mm id non-rowdy coil worked so well. Wicking was pretty simple too, I slightly raked the tails, cut them to the deck base and shoved them in. No dry hits and it is keeping up with my chainvaping easily.

The flavour is amazing. I've been lucky enough to have picked 3 RTAs that are all a cut above flavour-wise :wub:

ShowMeTwice · Jul 24, 2020

AngeNZ said:
this is gonna take ages to type

Done like a dog's dinner

Thank you for putting that together! I have quite a few of those. We have very similar DT tastes. Put some of the ones I didn't have in my cart.

Right around ~10-15mm visible are my favorite.

AngeNZ · Jul 24, 2020

OK question time:

@Letitia I want to bubble up the JK mini, but I wasn't sure if the chamber is attached in some way, or if the glass is just held on by o-rings. Help please :nun:

and thank you along with Mr @Fredman1 for enabling me to purchase of this RTA. I absolutely love it :wub:

@ShowMeTwice I changed flavours in the Tripod today, to test my new mix. When I tried to take it apart to clean it, I couldn't figure out how to remove the glass from the chamber. I unscrewed the top-fill seal, but got stuck at that point :facepalm:

the wind · Jul 24, 2020

ShowMeTwice · Jul 24, 2020

AngeNZ said:
@ShowMeTwice I changed flavours in the Tripod today, to test my new mix. When I tried to take it apart to clean it, I couldn't figure out how to remove the glass from the chamber. I unscrewed the top-fill seal, but got stuck at that point

I usually just take the tank section and put it in a bowl with dish soap to clean. Rinse under water to flush.

I removed the glass to swap with the 3.4ml ext once. It's been a while since I did that. There is a an easy trick to doing it IIRC that our Qorax Stan has in his fine video. I'll find that that link.

AngeNZ · Jul 24, 2020

the wind said:

Nearly died laughing at this stage of that vid:

ShowMeTwice · Jul 24, 2020

@AngeNZ, I got it. Just did it on one of mine. Once you have the base/build deck removed grab the lower SS section of the tank and unscrew it from the top cap. That lower SS section, with the chamber, will unscrew in one piece. From there you have full access to the glass.

Good luck.

AngeNZ · Jul 24, 2020

ShowMeTwice said:
@AngeNZ, I got it. Just did it on one of mine. Once you have the base/build deck removed grab the lower SS section of the tank and unscrew it from the top cap. That lower SS section, with the chamber, will unscrew in one piece. From there you have full access to the glass.

Good luck.

Perfect, thank you :wub:

ShowMeTwice · Jul 24, 2020

@AngeNZ, forgot to post the pic. :facepalm:

Here...

ETA: It can be a little tight trying to unscrew it. The gaskets provide a very tight seal so it doesn't leak. Just put some ooomph into it. :lol:

ShowMeTwice · Jul 24, 2020

The best Tripod video by our own @qorax Stan. :wub:

He does a full tear down of all the parts. Building tips etc. etc..

Katya · Jul 24, 2020

AngeNZ said:
this is gonna take ages to type
If you are fussy about the colour like me, click on the model menu to see the other colours.

Oh, Ange... Talk about above and beyond. :wub:

This is gonna take ages to read and click and find the colors I want. :lol:

Thank you so much!

Katya · Jul 24, 2020

charlie1465 said:
Good morning shinies
It's a very early one but I'm trying to get some more shut eye on the sofa.

Think I've decided to get another couple of Dvarw DL FL's along with some Fisher aliens. I've got to make the coil placement easier. I might go for the Haar too after that review sounds like a must have

Good morning, Charlie.

So I decided to do the right thing/bite the bullet and order an authentic Dvarw MTL FL (also because I really want the 24mm one), and guess what. That's the only deck they don't have on their site. :shock:

Dvarw MTL FL 24 deck only – KHW mods

But at least now I feel righteous and can order from FT without much guilt.

Have a wonderful summer Friday!

Opinionated · Jul 24, 2020

AngeNZ said:
Yeah I eventually did. I still preferred this one:
$2.28 Authentic MKWS 316L Stainless Steel Ribbon Heating Wire - 0.14mm*1.0mm flat size / 30ft (10m) at FastTech - Free Shipping
over the 0.8x0.2mm, as it was just a smidge faster to ramp up at 20watts. But if I hadn't tried the 1.0x0.14mm first? Then I would've been happy as Larry with the 0.8x0.2mm

I finally got the kanthal .14mm*1.mm yesterday to try in the single battery mechs , I was just curious if I should throw the other size in with my next order...

chanelvaps · Jul 24, 2020

charlie1465 said:
Good morning shinies
It's a very early one but I'm trying to get some more shut eye on the sofa.

Think I've decided to get another couple of Dvarw DL FL's along with some Fisher aliens. I've got to make the coil placement easier. I might go for the Haar too after that review sounds like a must have

do it! you deserve it :wub:

Letitia · Jul 24, 2020

AngeNZ said:
OK question time:

@Letitia I want to bubble up the JK mini, but I wasn't sure if the chamber is attached in some way, or if the glass is just held on by o-rings. Help please and thank you along with Mr @Fredman1 for enabling me to purchase of this RTA. I absolutely love it

@ShowMeTwice I changed flavours in the Tripod today, to test my new mix. When I tried to take it apart to clean it, I couldn't figure out how to remove the glass from the chamber. I unscrewed the top-fill seal, but got stuck at that point

Just orings Ange. One end the glass is slightly shorter and you want the short end on the deck. It fills better that way is the only reason, circumference is the same on both ends. For spare bubble glass the Merlin mini bubble is a perfect fit.

Shinyitis Support Group

ECF Guru

ShutterBug

∞

Vaping Master

ShutterBug

ShutterBug

∞

ShutterBug

Vaping Master

∞

ShutterBug

∞

ShutterBug

∞

∞

ECF Guru

ECF Guru

ECF Guru

ECF Guru

Citrus Junkie

Similar threads

Users who are viewing this thread