Shinyitis Support Group

[AvaOrchid]

I have decided this is what sucks about moving; you can set something down in a house full of boxes and never find it again.

My Topside is missing, probably off vacationing wearing my makeup, as I've lost that too. Had it the other day, now God only knows where it went....

Lol... someday I will find that mod! And the make-up! Hahaha

Having just moved myself I can completely relate and empathize with you I'm missing a whole box of coils or more accurately a box of boxes of coils post Factory coils and rebuildable coils maybe they're hanging out with your stuff I hear they really look good and peachy colored makeup

 

[Terri McVeety]

Morning shinies



You could just get some backup pod tanks, they have a 510 connector:
$9.25 Authentic VOOPOO PnP Pod Tank - 4.5ml / 0.3ohm/0.15ohm / stainless steel + PCTG / 26mm diameter at FastTech - Free Shipping



I've only seen the bubble glass here at Vaping Best:
3PCS Reload MTL RTA 22mm Bubble Glass Tube Fatboy Replacement [FT115x3]$7.99
They sell it also as Tripod bubble glass, but that listing is out of stock. Straight glass is here, but is more expensive than at FT:
$1.55 Iwodevape Replacement Glass Tank for Eleaf ELLO Mini Clearomizer (2-Pack) 2-pack - authentic / 2ml at FastTech - Free Shipping
My last order took about 3 weeks from Vaping Best

Thank you! I thought I’d seen that. I’ve got the 2 ml spares but only one extension kit. I wasn’t prepared for falling in love with the tripod and going from one to six!

 

[Katya]

I think this is where I first saw BigBob and Katya.

Right. I was introduced to Ahlusion by @Mr.Mann and @EleanorR in 2012... Just checked. Eight years...

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Katya]

If you want to learn as much as possible, I would be asking advice from anyone but me. But since you did ask...I just used a prebuilt coil (pretty sure it is 2.5id and 28g). I am just using the 1.2 insert that came with it. Wattage is generally around 12 to 13.

Thanks. That's how I build my coils, too. But 1.2mm insert? That's gnat territory. And it vapes OK? Are you getting any vapor from that? To me, 1.8mm is the smallest size I can vape satisfactorily. Very interesting.

 

[Redbird11]

Thanks. That's how I build my coils, too. But 1.2mm insert? That's gnat territory. And it vapes OK? Are you getting any vapor from that? To me, 1.8mm is the smallest size I can vape satisfactorily. Very interesting.

I'm pretty sure it is 1.2. It is just the insert that the $15.66 Coppervape Dvarw MTL Styled RTA Rebuildable Tank Atomizer - 3.5ml / 316 stainless steel + PEI / 22mm diameter at FastTech - Free Shipping came with. Might want to double check with @ShowMeTwice since that is who gave it to me. But, I am getting good vapor from it. And I am not someone who likes really restricted MTL.

 

[Katya]

Hey boys and girls, I have a question for all you frequent flyer Fasttech buyers. I have one order that most of the items are showing ready to ship, except two things. The two that are not ready originally had a ship date of today. However, now if I click on the item it states Ships in 5 business days. Would it be recommended to cancel those two items and reorder them in order for the rest of the item to be shipped? Or would you just leave it as is?

Don't ask me. I've been playing this game with FT for a month now. You can't win.

 

[Katya]

@Tar Heel - I forgot to mention, but my DHL package from Fasttech arrived yesterday...

------------

To all the Shiny people, good afternoon!

So how long did it take--door to door--for both DHL orders?

@Tar Heel --I thought your DHL order was sent to Nigeria... Or was it somebody else's?

 

[Aliraonz]

Good morning shinies

Your gnat was perfect @NolaMel gets the blame/credit for that expression - her berserker RTA needed a slight modification

I'd start with the Dvarw FL and/or JK mini for now. The Dvarw especially, is really beginner friendly - as shown by @Redbird11 getting so many after his first build

Thanks Ange

simple solution - swear your ....ing head off, so at least the ....ing dots are there for a ....ing reason

Yours are excellent and they included the use of bold colors. I saved them. Ty. Rob's is excellent too.

You both did a fine job and therefore win a Gnat Vape Award. Ali wins two for double the effort.

So I need some help making a decision. I was looking at the Argus GT and I was actually particularly intrigued by the Pod sub-ohm situation that they have going on there. I moved into a house that has apparently the hardest surface on the earth as the floor and broke my first tank glass so now I feel like I either have to go get extra glasses for 20 some odd tanks or purchase something for moving around the house that isn't likely to break that is a tank. I hear good things about the PNP coils and I know there is an RBA.

Initially I was thinking well I'll get the mod with the tank and then I was like well then I need the coils too and now this is getting expensive. Keep in mind we just moved. I don't need another mod I have plenty of mods and I have plenty of mods that have Smart Mode.

**But what I don't have is a plastic pod like subtank. With a 510 adapter. With push and play coils.**

So I'm fighting with myself about whether I should purchase one of these pod tanks with the 510 adapter a pack of coils and try to find a RBA section. Unfortunately the place that I have a coupon for doesn't have the RBA.

Does it make sense for me to purchase the Pod tank with the 510 adapter and coils and the RBA section (separately) really want a tank that I can just push a coil in that isn't meant to vape at a min of 70 + Watts. I don't want the mod but I feel like it's sacrilege. What I really want to hear is that the PNP coils are worth purchasing a tank for.

I have attached two pics, this one which is an PNP Rba tank and also the coils you could use with the PNP tank with the 510 connector.

I have decided this is what sucks about moving; you can set something down in a house full of boxes and never find it again.

My Topside is missing, probably off vacationing wearing my makeup, as I've lost that too. Had it the other day, now God only knows where it went....

Lol... someday I will find that mod! And the make-up! Hahaha

Luckily you separated the sentence if not it would have read "someday I will find that mod and then make up"

 

[Skunk!]

What's JKmini? Quok ques. Re:Fruit Flavors, with a tobacco preference what are gd Fruit Flavors to Experiment W/ Tobacco with Fruit Hint, FYi, Don't like Candy Sweet, only hints of sweet, is this doable? Can you suggest Fruit Flavor worth buying?

My favorites with tobacco are plum, raisin and peach.

 

[Tar Heel]

@Tar Heel --I thought your DHL order was sent to Nigeria... Or was it somebody else's?

They sent me the wrong tracking # the first time, I opened a ticket, and they sent me the correct one.

 

[Opinionated]

So how long did it take--door to door--for both DHL orders?

@Tar Heel --I thought your DHL order was sent to Nigeria... Or was it somebody else's?

DHL picked up Wednesday August 12 and delivered to my door Wednesday August 19...

But Greensboro, NC held it for a couple days, (Saturday to Tuesday) no reason as to why except they didn't want it delivered too early... lol.. either that or they had a more difficult time figuring out what truck they wanted to send all the way here... lol

 

[ShowMeTwice]

Good afternoon, almost evening, EveryOne !!!

Again I am in the rear view mirror by pages.

Hope y'all are enjoying a fine day. Or as fine as can be.

 

[Redbird11]

Don't ask me. I've been playing this game with FT for a month now. You can't win.

Well not with that attitude.

 

[Aliraonz]

@AngeNZ cant find your previous post as to what you pick for shipping at Fasttech. Helpppp

 

[ShowMeTwice]

Thanks. That's how I build my coils, too. But 1.2mm insert? That's gnat territory. And it vapes OK? Are you getting any vapor from that? To me, 1.8mm is the smallest size I can vape satisfactorily. Very interesting.

You will be fine with one of the more open AF inserts. Those are in your desired range.

I am very optimistic your packages will arrive and you will be happy!
Have some faith Woman!!!

I'm pretty sure it is 1.2. It is just the insert that the $15.66 Coppervape Dvarw MTL Styled RTA Rebuildable Tank Atomizer - 3.5ml / 316 stainless steel + PEI / 22mm diameter at FastTech - Free Shipping came with. Might want to double check with @ShowMeTwice since that is who gave it to me. But, I am getting good vapor from it. And I am not someone who likes really restricted MTL.

Yes yours has a 1.2mm insert.

1.2mm is the default AF for the v1 through FL MTL Dvarw's.

On my MTL FL I switched to one of the more open inserts I bought. I can MTL to a nice restricted DL with it. It's a very nice airy vape and rocking serious flavor.

ETA: You can always buy additional inserts via FT for your Coppervape Dvarw if you want a more airy vape.

 

[Opinionated]

Well not with that attitude.

The only thing missing in that sentence is to tack on a "young lady" at the end to sound all parental and everything... lol.

 

[Skunk!]

 

[ShowMeTwice]

@Redbird11, here are the Coppervape 1.5, 2 and 2.5mm AF inserts if you want a more airy vape.

$3.05 Coppervape AFC Kit for Dvarw MTL RTA Atomizer - 1.5mm/2mm/2.5mm at FastTech - Free Shipping

 

[ShowMeTwice]

The only thing missing in that sentence is to tack on a "young lady" at the end to sound all parental and everything... lol.

Ok Mom.