Since I started vaping I tried many things to stay vaping. I have an allergy to coconut and discovered most VG derives from Palm/coconut. I could handle the effects before and two years in a row it became worse to the point it became slightly unbearable. I have done elimination and last year I suspected its the VG so how do you vape without VG. I just told myself I'm not smoking again and that's the stage I'm in till I can get a non palm VG with certification.
I making the best of a bad situation.
But I'm making a different point. I don't know how many posters here bought Paramours, but if, say, thirty did, and three found fault with the mod, that means 10 percent of the total number of mods purchased had problems. That is not a good record.
To be very clear... the Paramour SbS is an "ok" mod BUT it does have its issues.
The Paramour is not a mod I would recommend.
It has issues, and not just with 3 people on ECF. For all we know there are more here. People have issues with it at FT. I'm 100% certain I could find people with problem Paramour's on nearly every vaping forum.
I could attempt upgrading my Paramour with high quality parts that I know for certain are reliable.
Here is exactly what that job would entail... A DNA 60 + screen. Modifications may be required on the mod to accommodate the DNA 60 screen. Better internal wiring and solder joints. A more robust situation for the known battery assembly problem (currently, glued in place). And finally a much higher quality 510 assembly.
Could I do that job? Yeppers
Is it worth it? Nope. Absolutely not.
The cost of parts alone would surpass the cost of the much higher quality Dovpo College DNA 60 SbS.
My whole point in being critical of the Paramour was to help others here who do not have the skills, nor the desire, to be repairing their own mod. A mod that, frankly, should not have these issues to begin with. I could easily name 50 people on ECF, actually more, who would not even consider doing their own repair work.
Personally I would be very happy reading someones post pointing out known flaws with a mod that I may have had interest in. It would save me money and headaches down the road.
YMMV and as always... my
.
ETA: I just checked one of my DNA 60's. A DNA 60 screen will not fit in the Paramour. That's why every DNA 60 SbS has the screen on the bottom or along the side of the mod.
The Paramour is not a mod I would recommend.
It has issues, and not just with 3 people on ECF. For all we know there are more here. People have issues with it at FT. I'm 100% certain I could find people with problem Paramour's on nearly every vaping forum.
I could attempt upgrading my Paramour with high quality parts that I know for certain are reliable.
Here is exactly what that job would entail... A DNA 60 + screen. Modifications may be required on the mod to accommodate the DNA 60 screen. Better internal wiring and solder joints. A more robust situation for the known battery assembly problem (currently, glued in place). And finally a much higher quality 510 assembly.
Could I do that job? Yeppers
Is it worth it? Nope. Absolutely not.
The cost of parts alone would surpass the cost of the much higher quality Dovpo College DNA 60 SbS.
My whole point in being critical of the Paramour was to help others here who do not have the skills, nor the desire, to be repairing their own mod. A mod that, frankly, should not have these issues to begin with. I could easily name 50 people on ECF, actually more, who would not even consider doing their own repair work.
Personally I would be very happy reading someones post pointing out known flaws with a mod that I may have had interest in. It would save me money and headaches down the road.
YMMV and as always... my
.ETA: I just checked one of my DNA 60's. A DNA 60 screen will not fit in the Paramour. That's why every DNA 60 SbS has the screen on the bottom or along the side of the mod.
Last edited:
I got my Thinder of God clone today. I've unboxed it but haven't tried it. All of my batteries are charging right now. This sucker takes 4 batteries. It took me awhile to figure out how the batteries go in. The battery compartment on this clone isn't the same as other clones. I finally found a non English YouTube video that had the same model. Once I try it and make sure it works, it goes back in the box and in my stash. This monster is for when all of my regulated mods die and no more can be had.
I really appreciate feedback about products - good or bad it all helps.To be very clear... the Paramour SbS is an "ok" mod BUT it does have its issues.
The Paramour is not a mod I would recommend.
It has issues, and not just with 3 people on ECF. For all we know there are more here. People have issues with it at FT. I'm 100% certain I could find people with problem Paramour's on nearly every vaping forum.
I could attempt upgrading my Paramour with high quality parts that I know for certain are reliable.
Here is exactly what that job would entail... A DNA 60 + screen. Modifications may be required on the mod to accommodate the DNA 60 screen. Better internal wiring and solder joints. A more robust situation for the known battery assembly problem (currently, glued in place). And finally a much higher quality 510 assembly.
Could I do that job? Yeppers
Is it worth it? Nope. Absolutely not.
The cost of parts alone would surpass the cost of the much higher quality Dovpo College DNA 60 SbS.
My whole point in being critical of the Paramour was to help others here who do not have the skills, nor the desire, to be repairing their own mod. A mod that, frankly, should not have these issues to begin with. I could easily name 50 people on ECF, actually more, who would not even consider doing their own repair work.
Personally I would be very happy reading someones post pointing out known flaws with a mod that I may have had interest in. It would save me money and headaches down the road.
YMMV and as always... my
ETA: I just checked one of my DNA 60's. A DNA 60 screen will not fit in the Paramour. That's why every DNA 60 SbS has the screen on the bottom or along the side of the mod.
My Paramour should be arriving either today or tomorrow so I'll post first impressions.
Sounds like more than 10% if this person is being truthful. They left the comment on Jai’s “review” (worth a watch just for Brie and her hammer) ....
Ok, batteries are all charged up and the Hammer of God tests just fine. It puts out a lot of vape, and with 2 pairs of batteries, I won't have to change batteries so often. Now back in the box it goes.
Our hospital instructed us to not take over-the-counter medication (Tylenol, Advil, Motrin) before the vaccination, as this could make the vaccine less effective. Taking these medications, as needed, after vaccination is OK.
Tracking is a different issue altogether and is optional--strictly for data collection. Even with tracking, we were allowed to take the meds as needed afterwards.
Jellybox is such a funny name for a mod.
Goodness me. That is soooo wrong...on so many levels. Bureaucracy at it's finest
Taxpayer supported. Free to any addict. No questions asked.
Wow. This makes He-roin sound much safer. I can't see the harm in trying it now.Taxpayer supported. Free to any addict. No questions asked.
I wonder if they'll be offering free mods and eliquids in the near future. Haven't heard anything yet, but a girl can hope. Would be nice.
I wonder if they'll be offering free mods and eliquids in the near future. Haven't heard anything yet, but a girl can hope. Would be nice.
No! Not that demon nicotine! Other substances, sure. But not nicotine.
You mean sweet, sweet H in eliquid form? Where do I sign up?I wonder if they'll be offering free mods and eliquids in the near future. Haven't heard anything yet, but a girl can hope. Would be nice.
Similar threads
- Locked
