The air on the Dvarw DL and the DL FL are very similar. If anything a bit smoother on the DL with the single hole AF inserts .
No worries Delores,it's the thought that counts
Same here buddy,received it on the 8th and yesterday i already got my first gulp of e-liquid in the mouth.
Once the gasket is deformed the top doesn't even thread properly,gotta wiggle around or take off completely and try again.
Only reason i can come up with is that the 2 that i got (sequential numbers) were just part of a bad batch,but even so i mean it's a 60+ euro atty...quality control should be better.
The augvape you mean this one:
️ Druga RTA 24mm - Augvape - ▷ VaporPlanet.OnlineThose are still around in stock over here.
And about the Mini yeah i had in mind getting one of those but the filling part was a no go for me,such a shame really the Juggy MR was the perfect vape for me but oh well let's hope the Reload delivers.
I experienced the juice gets thicker after about a week and added 1-2% depending. RDA's does a bit better, but tanks sometimes need the thinner viscosity.
Especially MTL. Well everyone's got their own vaping style so don't start adding too much at one time.
I'm confused. Isn't RBA a general term that covers both RTAs and RDAs?
Not that one. This one which is older.
$27.25 Authentic Augvape Intake RTA Rebuildable Tank Atomizer - 4.2/3ml / stainless steel + glass / 24mm diameter at FastTech - Free Shipping
I have several and look a lot to find more. Maybe in your area some shop could help you locate one.
Your theory of the bad batch of gaskets could be right. If it isn't pressure from the top cap then liquid or heat reaction to the gasket is all I can imagine. Did you try it with various liquids or straight vg/nic?
I build mine with a .5 to .6 3diamter coil with about 2/3rds of the coil showing above the side wings when looking at the side of it. Hope that makes sense.
For the record I very rarely use or purchase bottom airflow RTAs. I really like the fact that top airflow rtas just can't leak and condensation around the base is eliminated.
$27.25 Authentic Augvape Intake RTA Rebuildable Tank Atomizer - 4.2/3ml / stainless steel + glass / 24mm diameter at FastTech - Free Shipping
I have several and look a lot to find more. Maybe in your area some shop could help you locate one.
Your theory of the bad batch of gaskets could be right. If it isn't pressure from the top cap then liquid or heat reaction to the gasket is all I can imagine. Did you try it with various liquids or straight vg/nic?
I build mine with a .5 to .6 3diamter coil with about 2/3rds of the coil showing above the side wings when looking at the side of it. Hope that makes sense.
For the record I very rarely use or purchase bottom airflow RTAs. I really like the fact that top airflow rtas just can't leak and condensation around the base is eliminated.
No worries Delores,it's the thought that counts
View attachment 941827
Same here buddy,received it on the 8th and yesterday i already got my first gulp of e-liquid in the mouth.
Once the gasket is deformed the top doesn't even thread properly,gotta wiggle around or take off completely and try again.
Only reason i can come up with is that the 2 that i got (sequential numbers) were just part of a bad batch,but even so i mean it's a 60+ euro atty...quality control should be better.
The augvape you mean this one:
Those are still around in stock over here.
And about the Mini yeah i had in mind getting one of those but the filling part was a no go for me,such a shame really the Juggy MR was the perfect vape for me but oh well let's hope the Reload delivers.
Last edited:
I got my original from KHW mods but they're not cheap. Ive got a few
clones too and they're are ok....I'd go for an ulton one if I were you. Can't beat the machining in the og though 
Vandy Vape Requiem BF Squonk on HC for $29.04 with use of code "REBF".
Vandy Vape Requiem BF Kit
$33.99 @ SM with same code
Vandy Vape Requiem BF Kit 18650 6ml Mod Kit
Vandy Vape Requiem BF Kit
$33.99 @ SM with same code
Vandy Vape Requiem BF Kit 18650 6ml Mod Kit
Last edited:
Coil wise i have been using lately the Cleopatra from Lady Vapes (ALIEN TRICORE +-0,11/0,22 ohms) 3mm in size.
Juice wise i haven't made any changes,sticking to my usual 70%VG/30%PG and 3ml of nic.
To be honest didn't even think it was an e-liquid related issue,i mean if my other attys can handle that ''normal'' ratio and they cost 1/3rd of the price of the Juggy MR there is no reason for the Juggy MR not to be up to par.
Either the gaskets were faulty or the other possibility is bad machining on the top cap,can't be heat reaction either because i vape between 30w and 36w,not a fan of hot vapes and at those wattages are my sweet spot.
Thanks for the link,will bookmark that one for possible future use
I am inclined to think faulty top gasket as well. I bought several spares for down the road and hope they aren't crap. You definitely shouldn't have to go through this for a pretty expensive RTA. I hope you find a replacement you like as well or better.Coil wise i have been using lately the Cleopatra from Lady Vapes (ALIEN TRICORE +-0,11/0,22 ohms) 3mm in size.
Juice wise i haven't made any changes,sticking to my usual 70%VG/30%PG and 3ml of nic.
To be honest didn't even think it was an e-liquid related issue,i mean if my other attys can handle that ''normal'' ratio and they cost 1/3rd of the price of the Juggy MR there is no reason for the Juggy MR not to be up to par.
Either the gaskets were faulty or the other possibility is bad machining on the top cap,can't be heat reaction either because i vape between 30w and 36w,not a fan of hot vapes and at those wattages are my sweet spot.
Thanks for the link,will bookmark that one for possible future use
I was talking smoother not necessarily more open.???? No inserts and the FL is far more open than the DL
I've never vaped either DL or DL FL with
inserts removed entirely but with comparable inserts in I'm in Rob Fisher's camp of preferring the DL air over the FL.
So do you vape your DL with no inserts at all?
I don't recall this being so low in price $54.15 - I'm awfully tempted. Anyone remember?
YiHi SXmini X Class 200W Auto-Squonk Box Mod
YiHi SXmini X Class 200W Auto-Squonk Box Mod
Morning shinies
I'll take the pink ones!
The DL FL still has inserts, you just have to purchase them separately. It comes with the 2*2.5mm installed - which is 3.54mm id. The DL orig. comes with a 3mm id installed, and includes the rest. I use the 4mm id insert instead in my DL's, cuz I'm an airhead
Good morning shinies
Just bought 10 drip tips via @AngeNZ 's link....they better not all be pink
Have a great day everyone
I'll take the pink ones!
???? No inserts and the FL is far more open than the DL
The DL FL still has inserts, you just have to purchase them separately. It comes with the 2*2.5mm installed - which is 3.54mm id. The DL orig. comes with a 3mm id installed, and includes the rest. I use the 4mm id insert instead in my DL's, cuz I'm an airhead
That's a pretty good price. I don't have one but Everzon and Sourcemore have been clearancing out some older stuff like that. I picked up an SL class a while back for less than $50.
yep. started coz of looks and cheaper. when i was getting the reload sxk i wasn't in on the in_ asked here whether, being a clone, meant cheaper material etc. health etc. so was told you can avoid the paint. i now understand sxk is on equal footing as a regular producer and possibly shares facilities_ all shenzen_
speaking of which was funny how when researching cookware i learned to avoid chinese metals and the like for problematic content_ i try not to think abt it
Yes I can do that Virm....have you got a drill??
Mind you.... after drowning three cats my Mum said I wasn't too play with you again
goes to show you: PARENTS! first if you're like i wanna jiggle my hiney they go on and on about gettin an education and then you take as role model a harmless nihilist ho.mo.sexualabouttomarryapregnantladyinthefortiesthirtiessomethingwhotriestodrownhiscatsthatlookliketheboyhelikesorthattheboyhelikeslookslike and it's all healthy psyche this and beastiality that! you can't win with'em!
hmm_ that's odd, herself just informed she'd bought one the other day with a not dissimilar tone_ are my lobes missing something
Similar threads
- Locked
