chanelvaps

ECF Guru
ECF Veteran
Verified Member
Oct 3, 2013
16,032
85,313
Burbank CAlifornia
Yeah, I need to redo my mls per day. As soon as I posted I consulted with my other fav vaping friend. My daughter. I told her I suspected 6-7 mls and she and I went over things. Mine is more like 12-14. If I have left home with only a couple of pods and some juice maybe 8-10 on a good day but this vaping on an RTA at my desk is what sends my number skyrocketing.
 

Zazie

ECF Guru? No!
Supporting Member
ECF Veteran
Nov 2, 2018
10,714
71,933
Maine, USA
Ah Zazie tbh I don't really care what they really are. I planted it just for fun, but now I see their potential as a full bed plant. I like planting in groupings...makes a bigger impact. They've been flowering for about 7 months now. Will be a good bee attractant to.
Oh, if you just planted them 'cause they're pretty and smell good and are beloved of bees, that's different. I thought you were considering growing your own tobacco for extraction since you can't buy it easily anymore.
 
Last edited:

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,922
1
125,630
the Universe • ∞
VA.jpg


:thumbs: Just waiting now. Thought about it for a while. 300 made and with only a couple left in-stock, decided I ought to put the pedal to the metal.
 

AngeNZ

ShutterBug
Supporting Member
ECF Veteran
  • Mar 24, 2018
    11,364
    88,371
    New Zealand
    View attachment 948287

    :thumbs: Just waiting now. Thought about it for a while. 300 made and with only a couple left in-stock, decided I ought to put the pedal to the metal.

    I'm absolutely amazed there's still stock. I'm glad you got one, we both know what a amooth flavour banger RDA it is :thumbs:
     

    ShowMeTwice

    Supporting Member
    ECF Veteran
    Jun 28, 2016
    18,922
    1
    125,630
    the Universe • ∞
    I'm absolutely amazed there's still stock. I'm glad you got one, we both know what a amooth flavour banger RDA it is :thumbs:
    I've had one on my blue dotSquonk for a few weeks. I installed a 26/36 316L 3mm ID 0.5 ohm coil and it just screams flavor. Need to try a 3.5mm ID in it next. There's still room for it.
     
    Last edited:

    ShowMeTwice

    Supporting Member
    ECF Veteran
    Jun 28, 2016
    18,922
    1
    125,630
    the Universe • ∞
    Therefore, I reserve the right to be a ClosetCloudChucker (technical term).
    Shhhhhhh, don't tell no one but I do chuck the occasional cloud and then chuckle in complete amazement.

    PS: I'm staying in the CloudCloset. :lol: :lol:
    046b2a07f4efca6fa5e2a70452132107.jpg


    #closetcloudchucker :D
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,364
    88,371
    New Zealand
    I've had one on my blue dotSquonk for a few weeks. I installed a 26/36 316L 3mm ID 0.5 ohm coil and it just screams flavor. Need to try a 3.5mm ID it in next. There's still room for it.

    I think it was my third? RDA. I loved it for the flavour and smoothness. But found it too tight with my fave lil drip tips, compared to the Hussar and NarCa. That said, I need to dig it out and try it with some larger bore 510 dts
     

    ShowMeTwice

    Supporting Member
    ECF Veteran
    Jun 28, 2016
    18,922
    1
    125,630
    the Universe • ∞
    I think it was my third? RDA. I loved it for the flavour and smoothness. But found it too tight with my fave lil drip tips, compared to the Hussar and NarCa. That said, I need to dig it out and try it with some larger bore 510 dts
    Dig your Apex out Ange. With you being so used to BigAirMTL I hope it's not too tight for you. I have a Hussar v2 RDA on my purple dotSquonk. Swapped the SS screw-on top with one from a Project X. Just put a 3mm ID coil in the v2 too, (two too ;)). Much nicer. Moooooore Flaaaaaavour. :)
     

    Fredman1

    Vaping Master
    ECF Veteran
    Mar 27, 2017
    4,052
    22,790
    68
    New Zealand
    Oh, if you just planted them 'cause they're pretty and smell good and are beloved of bees, that's different. I thought you were considering growing your own tobacco for extraction since you can't buy it easily anymore.
    It actually started out that way. I initially thought i'll grow and make my own. When I started researching it, I found it's not that straight forward. Raw dried tobacco is not really fit for use. Harvesting to start off with, is critical to a good product. The treatment process after that is varied and very specialized. Way to much involved for me.
    I'm just so glad I started collecting when I did. Looking back now, if I started a month later I would've been in serious trouble. They're really clamping down now and it's almost impossible to get any tobacco through anymore.
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    As for clouds: I freely admit it is bloody fun to fill up a room with only a few exhales :vapor:

    I started vaping as a tight MTL through to my current RDL vaped MTL:facepalm: Therefore, I reserve the right to be a ClosetCloudChucker (technical term).
    I'm a carcloudchucker too.... remember to exhale sideways otherwise you're a blindcarcloudchucker too :pervy:
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    It actually started out that way. I initially thought i'll grow and make my own. When I started researching it, I found it's not that straight forward. Raw dried tobacco is not really fit for use. Harvesting to start off with, is critical to a good product. The treatment process after that is varied and very specialized. Way to much involved for me.
    I'm just so glad I started collecting when I did. Looking back now, if I started a month later I would've been in serious trouble. They're really clamping down now and it's almost impossible to get any tobacco through anymore.
    Yes with tobacco they flue cure it....it's hung very close together in little huts so that it gets quite hot and moist. It's a balance between moisture and air. Too much moisture it goes moldy..too much air it dries to fast. The moisture and warmth are what makes the leaves go brown.....not an easy process :)
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    It actually started out that way. I initially thought i'll grow and make my own. When I started researching it, I found it's not that straight forward. Raw dried tobacco is not really fit for use. Harvesting to start off with, is critical to a good product. The treatment process after that is varied and very specialized. Way to much involved for me.
    I'm just so glad I started collecting when I did. Looking back now, if I started a month later I would've been in serious trouble. They're really clamping down now and it's almost impossible to get any tobacco through anymore.
    It's inspiring to see someone looking deeply into a subject and getting the most out of it. Pity the Powers have done their best to queer your pitch mate. Looks like you've got enough to go along with though.
    Enjoyed that post with all the jars!
     

    DeloresRose

    Vaping Master
    ECF Veteran
    Apr 25, 2014
    8,610
    63,106
    toledo ohio
    As for clouds: I freely admit it is bloody fun to fill up a room with only a few exhales :vapor:

    I started vaping as a tight MTL through to my current RDL vaped MTL:facepalm: Therefore, I reserve the right to be a ClosetCloudChucker (technical term).


    Same. I admit I really need a big hit sometimes... I still need my Nic a lot, I need to dose quickly, and nothing will give me that without a big cloud. So the cloud is just the byproduct. But sometimes I just get foggy for the fog of it. :)
     

    Opinionated

    ECF Guru
    ECF Veteran
    Verified Member
    Aug 19, 2015
    11,168
    59,365
    56
    My Mountain
    Hey I won the Innokin contest....supposed to be a good mod and tank so that's a plus. Nice to win something again :)

    ohh you got one of the special edition ones? Awesome! Congratulations!

    And to you too @Javichu ! I'm so happy for you!
     
    Last edited:

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,641
    180,094
    Somewhere between here and there
    I used to always do mtl and Rdl in the 25-30 watts range but reviewing high output devices has gotten me into a little more DL as high as 50-55 watts. I’ve been keeping one setup in rotation for higher watts. I have a few that I like around 45.
     

    Users who are viewing this thread