Pigs

Vaping
Supporting Member
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
By internal section do you mean the part I highlighted in your photo?
View attachment 957979
That part is called the Closing Ring. On the authentic it does not come installed (I forget the reason why, but there is a reason). StattQualm provides detailed instructions on how to install it. Once it is properly installed it will not rotate or move at all. And it can still be removed for cleaning.

Makes me wonder if the clones are the same way and they don't tell you that you need to properly install the Closing Ring.

I attached the instructions below. Line the Closing Ring up with the base as shown in S-3. The two juice flow ports on the Closing Ring should line-up with where your wick tails would be and in-line with where your coil would be. Then line up the base vertical line with the one on the tank section. Attach the base with Closing Ring as shown in S-4 while pushing down on the tank section and up on the base. Then turn the base all the way to the left and then all the way to the right, then back to remove ->|<- remove the tank -> Closing Ring is in place. If the clone is like the OG it will click into place. Once it is in place it will not move at all (don't know how they did the clones).
View attachment 957981
Hopefully that helps you.
The closing rings on both my clones don't move or rotate at all once installed properly.
 

Fredman1

Vaping Master
ECF Veteran
Mar 27, 2017
4,052
22,790
68
New Zealand
One of my favorite songs...

I keep seeing you as i take this song in ;)
Yeah simple works for me. I'm working hard at disconnecting myself from the rat race.
Being/Thinking simple allows me to take in the things in life that really matters....nature and animals in particular.
 

Territoo

Diva
Supporting Member
ECF Veteran
Verified Member
  • Jul 17, 2009
    7,714
    38,037
    Texas
    which one and what color?? Do you already know which rdas you’ll 1st try on it? I love my topside singles!! Just be careful w

    I have the Topside dual in black coming. I've got a nice Dead Rabbit RTA in black just waiting for it.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,362
    88,356
    New Zealand
    Same here buddy,hope all is well :)



    I did see the Arbiter 2,shame it is a double coil atty thou but it does look good.

    Airlflow/draw wise i have been using my JuggerKnot Mini (Clone) with half of the airflow closed,how would that compare to the Arbiter (RDL mode) with all the airflow open?

    On other news i ordered some aromas/base today and i talked to the manager of one of the shops and he says they have been selling the Wasp Nano RTA V2 like crazy.

    ♎ Wasp Nano RTA V2 by Oumier | SINHUMO SEVILLA ♎

    They ordered 150 to distribute between their 8 stores (and online sales) and by the next morning they were all sold out,they had to place another order right away.
    My first RTA was the Wasp Nano and it was good,haven't read any reviews of the V2 thou not sure how it performs,it is bottom airflow thou...i gave up on those,just to much hassle.

    It's hard because the JK is dual air and 810, and the Arbiter Solo is one-sided and 510. This is all tried out, with the Solo in RDL mode:
    With a 510 adapter and drip tip in the JK, airflow half open - it's close to the Solo wide open. With an 810 drip tip in the JK, airflow 2/3 open and your finger blocking one side - that's roughly the Solo.

    If you still have your Zenith II tank - with the 0.3ohm coil and airflow wide open, it's tighter than the Solo wide open.

    And I'd go by what reviewers say about the airflow, over me. I'm so screwed up that the Zenith II is too tight wide open for MTL, so I vape it RDL. Whereas the JK Mini RTA wide open is perfect for MTL, but too airy for RDL. The Solo is in the middle - just airy enough wide open for MTL.
    polar-bear-hiding-face.jpg
     

    Daniel Forsyth

    Vaping Master
    ECF Veteran
  • Mar 26, 2019
    9,442
    57,133
    45
    Victoria, Australia
    View attachment 957967

    Do the mtl have the same tiny fill hole? I had to use a syringe. I like it, but that’s way worse than I expected, that’s a deal breaker for me.

    The fill holes are pretty much the same size on both Brunhilde's. I've never had any problem filling either since I got them. But I really don't want you to be having any issues with your Brunhilde so just for you here's The Filling of Big Bad Brunhilde:wub:
    I use a 30ml chubby gorilla bottle to fill both the Big Girl and my MTL's most of the time. The odd occasion I'll use a 60ml or 100ml bottle with a larger tip.
    Grab your Brunhilde and hold her gently with one hand and your juice bottle in the other and shove the tip in the fill hole quite firmly and put on a slight angle image.jpg and then squeeeeze and she will start to happily fill with juice image.jpg when there's enough juice in remove the bottle and your all good to go, mess free image.jpg :)

    I hope you can see my 'juice' level alright, it's some good quality H2O! And sorry if the pics are a bit out of focus, filling one handed and taking photos with the other was funo_O
    I Really hope this helps a little and you can use your Beautiful Brunhilde RTA fuss free:wub:
    I'm always here for anymore info if needed:thumb:
     

    ShowMeTwice

    Supporting Member
    ECF Veteran
    Jun 28, 2016
    18,921
    1
    125,630
    the Universe • ∞
    I keep seeing you as i take this song in ;)
    Yeah simple works for me. I'm working hard at disconnecting myself from the rat race.
    Being/Thinking simple allows me to take in the things in life that really matters....nature and animals in particular.
    Yes sir Fred, that is the ticket, the real things that matter most to us. Keep it freakin' simple stupid. Check your PM's. :)
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    I can turn mine in the housing...then the airflow slots opens and closes.
    That's what it's supposed to do when it's assembled. The juice flow and airflow are linked so the more the open the AF, the more you open the JF.
    That video of Todd's that I posted explains it .
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Squape Arise by default comes as 4ml or 2ml (TPD).

    I bought the 4ml Arise direct but also bought the 2ml kit for when I want a more compact setup.

    Arise is top fill with the easiest to use JFC on the market. Simply rotate the tank section and you are set, zero complexity. FWIW the Arise has less parts than just about any RTA out there (including a Dvarw :D).

    StattQualm offer an 8ml tank option for the Arise.

    Is 8ml big enough for you? ;)
    Yes 8ml should be big enough :D
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Yes J! Maybe that's why we love this little micro world of rta designs, coils, wicks etc. So much simpler than the macro world out there.
    Talking of agreeing to disagree...I always have a little laugh when I see the Vapefly and German 103 team name. Can you imagine 103 people all agreeing on an atty design! :lol:
    I agree :D
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    I was using gift certificates for quite a while with FT but my last two purchases were done using PP. Maybe three weeks ago.
    I think it depends on what you purchase although I could be wrong..... frequently am!!
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Yes, the mtl does have a small fill hole. I didn't know anything about it before I ordered it. I was able to use a 10ml plastic bottle to fill but it barely fits.
    That's not good news....could be a deal breaker for me. I bought mine to test it really as there were so many of you guys raving about flavour!! If it's that much of a pain to fill it will be shelved.
    Can't you just disassemble and fill through the wicking assembly??
     

    Fredman1

    Vaping Master
    ECF Veteran
    Mar 27, 2017
    4,052
    22,790
    68
    New Zealand
    That's what it's supposed to do when it's assembled. The juice flow and airflow are linked so the more the open the AF, the more you open the JF.
    That video of Todd's that I posted explains it .
    Yeah I'm aware of that. That's what i've been trying to explain. When it's turned out of alignment, it's not easy to get the base back in again....:(
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Salutations fellow vaperinos.

    Quick pop in to say and hope you all doing ok,you know the usual staying safe and healthy.

    Not much free time lately,stupid identity theft case is so frustrating...last 2 weeks been with my lawyer getting all the paperwork together.

    Not really worried since i got nothing to my name and this isn't a penal offense i am not worried for me but just for the time i am wasting trying to get it resolved.

    Vaping wise well same ol' same ol',still waiting for my sourcemore package so i can review the Jackaroo kit and the Kriemhild II tank.
    This afternoon it just changed to ''The shipment is handed over in bulk, final acceptance of goods to be confirmed'' so i am hoping i don't have to wait much more.

    Few moments i have left i have been binge watching the tv series Royal Pains and listening to some songs from the 80's



    Shiny wise i am still looking at the Arbiter Solo RTA by Oxva,depending on the finances maybe i will get one.
    Will be using it exclusively in RDL mode so i am eager to see how it goes.

    Not much more to say,wish i could spend more time here with you kind folks but life always seems to get in the way.

    Best wishes to all of you :)

    Good to see you Javi....I hope all this crap goes away soon :wub:
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    I have a literal army of RDA's I love.

    Just so happens I like my army of RTA's too. :D

    I don't have problems with any of the RTA's I own. They just work, like they're supposed to... as any RDA I own does. ;)
    Ah but once you mastered a Kayfun everything seems easy.... especially the later versions ;):D
     

    Users who are viewing this thread