Are most of these types of atties used more for MLT than DL? I’m liking the air flow wide open on most of my atomizers.It looks just like a standard RDTA Charlie, they're everywhere these days![]()
Are most of these types of atties used more for MLT than DL? I’m liking the air flow wide open on most of my atomizers.It looks just like a standard RDTA Charlie, they're everywhere these days![]()
The entire 510 assembly loosens by itself from unscrewing an RTA to fill and then screwing it back on.
So it took about a couple minutes for the 510 assy to loosen on it's own. No RTA was ever screwed on too tightly. I mean, who does that?
I took my Paramour apart to inspect the 510 assembly. The reason it comes loose is the "genius makers" never properly secured the 510 assy to the frame of the mod with a lock washer. That is the problem.
Fixing it will require unsoldering a wire or two, installing a proper lock washer and resoldering the wires. I could fix mine, if I wanted, but instead tossed it back in its box. Doubt I will ever do anything with it, like you I have many mods to choose from.
A customer should never have to fix a poorly designed mod. The designers should have designed it properly in the first place. They did not.
Nice surprise!!!My Dovpo College DNA 60 SBS from Health Cabin was just delivered. I ordered it on Oct 7, while the Chinese were still on holiday. They shipped it on the 10th. It took 5 days from Hong Kong using HC's cheapest shipping method.
Thating Rocks!
It's a new record for shipping time from any of the Chinese online sellers (FT, SM or HC) using the cheapest shipping method.
I think a lot if these design flaws happen when the designers cut corners to try to make something cheaper, smaller etc. In this case maybe they didn't use a nut on the 510 assembly to keep the size down - it is tiny for a 21700. Who knows why, but it's a flaw no doubt.The entire 510 assembly loosens by itself from unscrewing an RTA to fill and then screwing it back on.
So it took about a couple minutes for the 510 assy to loosen on it's own. No RTA was ever screwed on too tightly. I mean, who does that?
I took my Paramour apart to inspect the 510 assembly. The reason it comes loose is the "genius makers" never properly secured the 510 assy to the frame of the mod with a lock washer. That is the problem.
Fixing it will require unsoldering a wire or two, installing a proper lock washer and resoldering the wires. I could fix mine, if I wanted, but instead tossed it back in its box. Doubt I will ever do anything with it, like you I have many mods to choose from.
A customer should never have to fix a poorly designed mod. The designers should have designed it properly in the first place. They did not.
Are most of these types of atties used more for MLT than DL? I’m liking the air flow wide open on most of my atomizers.
Hiya fellow vaperinos
At home and wanting to go to bed early but i decided to watch BSG again and now i am hooked and about to start season 2 so who knows when i will go to bed,maybe i will pull an all nighter...been ages since i have done that.
Vape wise i have spent like 2 weeks without changing coil or wick on any RTA,used the attys i got for review purposes and let me tell you what a relief,felt good not have to worry about changing the cotton.
But today my 2nd Kriemhild coil started tasting a bit funky so decided to put a new coil and some cotton in my Juggy Mini clone.
While looking for a screwdriver in the bottom of my vape stuff related box i found a small 10ml bottle of Honeydew liquid...no idea where i got it from thou.
So anyway i threw caution to the wind and decided to give it a try,never tried melon before...think its the only fruit i haven't tried.
Expectations were low but once i got my Juggy up and running WOW!!!
I actually like Honeydew flavored aroma,this one is also fresh so i get the best of both worlds...it's not overly sweet but leaves me with a nice after taste.
It's expensive thou (it's liquid not just aroma) so i have to look around for some Honeydew/Fresh aromas but it's good to have another flavor to my very limited flavors of e-liquid that i actually like.
Can't afford the liquid i am trying at the moment since it is way out of my monthly vaping budget he he
https://www.sinhumo-sevilla.net/idm...al-possessed-frozen-series-by-idmx-juice.html
But dang is it good,bottle is gone and i am craving more
Well anyway hope you are all doing ok,being safe and staying healthy and sending you a big hug from Sunny Spain.
P.S: I downloaded a movie for my pops yesterday and watched it with him and now i can't get this darn song out of my mind
I'm a gettin worried here....ordered my College from them on the 7th Oct, and still no shipping notice. I emailed them...and a waitinMy Dovpo College DNA 60 SBS from Health Cabin was just delivered. I ordered it on Oct 7, while the Chinese were still on holiday. They shipped it on the 10th. It took 5 days from Hong Kong using HC's cheapest shipping method.
Thating Rocks!
It's a new record for shipping time from any of the Chinese online sellers (FT, SM or HC) using the cheapest shipping method.
ETA: I now have three College's to choose from for my RTA's education. I've named them Stanford, Yale and Harvard.![]()
P.S: I downloaded a movie for my pops yesterday and watched it with him and now i can't get this darn song out of my mind
So I’ve got a lot of vape mail in the past weeks as part of the continuing buy one more ______ and then I’ll be set for life. Of course I’ve got enough to start a Vape Emporium l!!
I’ll start with these 2 stabwoods from Stabwood Mods UK.
The 1st is a Casper by DPM and is a squonker with single battery. I haven’t set it up yet but the mod looks perfect. Has a great finish very professionally done. Great hand feel!!
View attachment 959697
View attachment 959703
Next in line is an Ultroner Victory. Another single battery mod. And looks well made also.
View attachment 959699 View attachment 959701 View attachment 959699
So both mods are a hit with me. I’m looking forward to trying out the Casper squonker soon.
I love the Johnny Cash version
Here's Don Schlitz being interviewed about writing The GamblerI grew up listening to country - thanks to Dad, and the Kenny Roger's version was the one I heard the most. But he also loved Johnny Cash and listening to that version, brought back lots of good memories.
Here's Don Schlitz being interviewed about writing The Gambler
They can but they still have to get approval from the writer. If the writer doesn't like the changes they can stop the record from being released. Regardless, the writer gets the full publishing royalty.Interesting they use slightly different words in the song....got me thinking. Is the singer allowed to change words from a song they received from a writer?
Mike Shepherd comes to mindI grew up listening to country - thanks to Dad, and the Kenny Roger's version was the one I heard the most. But he also loved Johnny Cash and listening to that version, brought back lots of good memories.
There are interesting stories behind Johnny Cash's version of The Gambler.Interesting they use slightly different words in the song....got me thinking. Is the singer allowed to change words from a song they received from a writer?
I think I like it. Kinda industrial looking, which I am attracted to. I'll look for some reviews on this tank. I am strictly MTL, needing a really tight draw, so I have to be careful what I buy. I like the idea of Brunhilde MTL, but just can't get past its look I'm afraid. I was thinking of getting one but got a BP Mods Pioneer instead. Looks entered into that decision, too, lol.Morning Shinies
Wait for it.... Brunhilde without the looks....
Buy Authentic Ambition Mods Ripley MTL / RDL RDTA Atomizer Gun Metal
Looks interesting. What does everyone think??
Have a good day![]()
I love Johnny Cash old and new. Really enjoy the Rick Rubin produced American Recordings I-V (1994-2006).I love the Johnny Cash version