Shinyitis Support Group

[Fredman1]

Or as big as the spiders in Aussie, where you just put a leash on them and walk them out the door.

The baboon spiders in Africa used to follow us as children. They actually seek out your shadow...apparently.

 

[puffon]

Does anybody have a idea where I can get thin shimlike washers to put under and atty? This SBS mods can do with it. With the Mixx for instance...when the airflow is against the tube, it builds up condensation after a while.
Also I can direct the airflow so I don't block it with a finger.

These might work:
$2.96 Iwodevape PC Heat Insulation Gasket for Atomizers (10-Pack) 10-pack - 5*black + 5*white / for 22mm diameter atomizer at FastTech - Free Shipping
.5 mm thick, they have 22 or 24mm

 

[AngeNZ]

Does anybody have a idea where I can get thin shimlike washers to put under and atty? This SBS mods can do with it. With the Mixx for instance...when the airflow is against the tube, it builds up condensation after a while.
Also I can direct the airflow so I don't block it with a finger.

I got these ones:
$2.98 Iwodevape PC Heat Insulation Gasket for Atomizers (10-Pack) 10-pack - 5*black + 5*white / for 24mm diameter atomizer at FastTech - Free Shipping
They're 0.5mm thick. And there's others here, just keep an eye on the height:
FastTech - Gadgets and Electronics

But I mainly use a drip tip o-ring on the 510 connector of my Dvarws that ain't lining up right

 

[ShamrockPat]

Does anybody have a idea where I can get thin shimlike washers to put under and atty?

I've used the plastic top from an old coffee can, and even a Pringles lid. Drill hole, then trim what protudes. If it's too thick, you might not get a good positive connection.

 

[AngeNZ]

I've got so pedantic now that all my Dvarw airflow inlets have to line up facing over the fire button on my Mixxes. It started with fingers getting too warm, now it's just crazy ocdness

 

[Fredman1]

hear! hear!
Intrigued by this atty,would love to hear your experience with it.

Hiya folks

The Kumo is fast becoming my favorite tank. Love the dense vapor it makes. The flavor from it don't drop off either...only when the coil is clogged. Think it all has to do with how it feeds the liquid.

 

[chanelvaps]

I used to be able to see an air bubble rise when hitting my vape. I am no longer seeing that. does this mean I do not have a tight seal?

 

[Javichu]

I've got so pedantic now that all my Dvarw airflow inlets have to line up facing over the fire button on my Mixxes. It started with fingers getting too warm, now it's just crazy ocdness

Yep,happens to me too but with the fridge...just gotta make sure it's closed.
Not sure if i have always been like this or it's just stress related *shrug*

The Kumo is fast becoming my favorite tank. Love the dense vapor it makes. The flavor from it don't drop off either...only when the coil is clogged. Think it all has to do with how it feeds the liquid.

I am digging it,only caveat for me is the 3.5 ml capacity but apart from that i just love the looks of it.

 

[Letitia]

Does anybody have a idea where I can get thin shimlike washers to put under and atty? This SBS mods can do with it. With the Mixx for instance...when the airflow is against the tube, it builds up condensation after a while.
Also I can direct the airflow so I don't block it with a finger.

I buy mine from the plumbing department in our local hardware store. If you have a squid double barrel you have 3 in your box.

 

[Letitia]

Well I ordered a blotto single and a couple innokin mods for my uncle from ft 9 days ago and they've shipped...might get here by Christmas if they don't get seized.

 

[chanelvaps]

Well I ordered a blotto single and a couple innokin mods for my uncle from ft 9 days ago and they've shipped...might get here by Christmas if they don't get seized.

I ordred the Blotto too. First RTA in a long time. How the heck are you? seems I hardly see you in here

 

[Letitia]

I ordred the Blotto too. First RTA in a long time. How the heck are you? seems I hardly see you in here

Doing well, thanks. Reverted back to mostly lurking these days on the forums; simply don't have much to say of interest.

 

[Fidola13]

Hope it all goes well.

Lately i haven't had much practice when it comes to wicking,been using my Juggy mini clone for quite a bit as my only RTA so i might be a bit rusty but i will give it a go once i get it.

Out of curiosity,what size coils you using or would recommend for the Fat Rabbit,2.5mm or 3mm?
OHM wise not sure if my usual 0.25'ish will work for this one,first time that i will try a double coil atty.

I usually use 3ohms in my coils but for larger atties I follow what DJLS uses on his build videos.

In the past on large coils hes recommended id settings of 3.5mm to 4.00mm but on the Fat Rabbit RTA I can’t remember. I’m going to watch his videos again to poke the memory a bit especially since I still haven’t rebuild it yet! I’ll give it ago now but if it still leaks I’ll use dual coils in it to get those afc all start.

 

[Fidola13]

Hey all been a few days. Haven’t been feeling well but hopefully this flare up will flash far away lol!

3 weeks almost.This is definitely the longest I’ve waited for vape mail from china. Placed this order on October 29th

The Sourcemore orders just landed at LAX I Wonder how long it will take to get to Boston.

I’m I still have a 3fvape and Fasttech orders to “arrive” . Maybe I’ll be getting them as holiday gift!!! Christmas NOT Thanksgiving!

 

[Fidola13]

These might work:
$2.96 Iwodevape PC Heat Insulation Gasket for Atomizers (10-Pack) 10-pack - 5*black + 5*white / for 22mm diameter atomizer at FastTech - Free Shipping
.5 mm thick, they have 22 or 24mm

I use those on all of my higher end mods. Keeps the 510 area from getting scratched up.

 

[Fidola13]

Morning shinies



Thank you - I hoped that it would work with a single. @Fidola13 the Arbiter 2 may work for you too, unless you already bought one!

i can’t remember what I ordered. I ordered 6 or 7 attys lol! I could check my invoices but I’ll wait for a surprise!!!!

 

[charlie1465]

@charlie1465 have you perhaps started up the Kumo yet? I'm interested to hear your thoughts.

It came the day before I left for the UK so I didn't touch it....still on the table boxed. I'll let you know what I think when I get back....sounds quite a tight RDL from what you said earlier so I may not like it much!!

 

[charlie1465]

Does anybody have a idea where I can get thin shimlike washers to put under and atty? This SBS mods can do with it. With the Mixx for instance...when the airflow is against the tube, it builds up condensation after a while.
Also I can direct the airflow so I don't block it with a finger.

You can get a packet of them at fasttech.....

$6.34 (Free or Cheap Shipping) Replacement PEI Heat Insulation Gasket for Atomizers (10-Pack) (PEI, 24mm, Yellow, 10-Pack (1mm)) at m.FastTech.com

 

[charlie1465]

Morning Shinies

Blowing a hooley out there
We're off to Wells (near Bath) to see my niece singing in the Wells cathedral choir...should be nice. Staying in a hotel next to the cathedral so nice and easy.

Loving the weather!!

Running a Dvarw with custard....and a battery of course and I've got a Zenith/Coolfire for a back up. You never know although my Mixx is very trusty
Have a good day

 

[DeloresRose]

Guess it's not the kind that obligingly curls into a tight ball when it feels threatened. I always feel sorry for those guys, but they sure are easier to capture.

The spiders here definitely do not just curl up into a ball, they know I’m more afraid of them than they are of me. At least this one isn’t like the big ones in the basement, those guys rear up and charge me.

This one was kind of hanging around the kitchen window.
I thought I’d try to catch it in a butter tub and pop it out in the garden, but when I saw how fast it was there was no way I was catching it.
We had a live and let live arrangement. Until now. I just can’t get it out of the sink. Which I would work around for a few days, but I had put the air fryer thingy in the sink to soak and it will not let me touch it.