Nice fish T and I love the old photo. What's the average size of the Luderick you catch? Do they put up a good fight?
Nice fish T and I love the old photo. What's the average size of the Luderick you catch? Do they put up a good fight?
Morning shinies 
Still hooked on the Axial
Still hooked on the Axial
Thanks J. The average size where I catch them is around 36 to 40cm.
They are renowned as hard fighters. Not fast runs but rough and tumble brawling with lots of stamina. We use light lines and long, soft rods to cushion the lunges.
In case FT is going the way of the Moa bird: they still have Abyss tank replacement tanks, so I ordered them:
https://www.fasttech.com/p/9740710
And some o-rings.
They still have the Abyss SBS kit if anyone needs one:
https://www.fasttech.com/p/9740716
And I found another source of grub screws:
Stainless Steel Fasteners - Shop Cheap Stainless Steel Fasteners from China Stainless Steel Fasteners Suppliers at Baigu Fasteners Store on Aliexpress.com
https://www.fasttech.com/p/9740710
And some o-rings.
They still have the Abyss SBS kit if anyone needs one:
https://www.fasttech.com/p/9740716
And I found another source of grub screws:
Stainless Steel Fasteners - Shop Cheap Stainless Steel Fasteners from China Stainless Steel Fasteners Suppliers at Baigu Fasteners Store on Aliexpress.com
Good evening folks,
ummm, now my plans start to be complete, ordered those Mod Dog Switches, their dna flex cable, and a couple 510 connectors.
And..................
ummm, now my plans start to be complete, ordered those Mod Dog Switches, their dna flex cable, and a couple 510 connectors.
And..................
I would tell Dicodes that you are a new modder who is just starting. You are. I would leave the hobby modder part out. They don't need to know that.
Dicodes, I did not expected this at all, they are awesome !!!!
Sooo, I was super psyched with Ecigone at first, but their delivery has been anything short of impressive. Part of it isn't their fault, and part of it definitely is.
I originally ordered 2 SXmini's and an Ultroner Alieno Stabwood. I then created another order for a dotshell and the adapter, and asked if I could append it to the previous order since the original order was still waiting to ship because of pre-order. I get the okay, pay for the second shipment, and everything should be hunky dory.
The package arrives and the Alieno and one of the SXmini's works as intended, while the 2nd SXmini doesn't turn on. No dotshell or adapter to be found. I email Ecigone and mention the package arrived and that one of the SXmini's doesn't turn on while the other works fine. And also asked about the second part of the order.
The response I got was...
Stapled? You stapled two packages together to go overseas and you expected them to stay together for the entirety of the trip?
And if I got one SXmini working, but the other I didn't, shouldn't we assume that... Never mind.
I have a strong feeling this is going to be a long ordeal with customer service, and one I may end up eating the cost on to avoid absolute frustration...
I originally ordered 2 SXmini's and an Ultroner Alieno Stabwood. I then created another order for a dotshell and the adapter, and asked if I could append it to the previous order since the original order was still waiting to ship because of pre-order. I get the okay, pay for the second shipment, and everything should be hunky dory.
The package arrives and the Alieno and one of the SXmini's works as intended, while the 2nd SXmini doesn't turn on. No dotshell or adapter to be found. I email Ecigone and mention the package arrived and that one of the SXmini's doesn't turn on while the other works fine. And also asked about the second part of the order.
The response I got was...
Stapled? You stapled two packages together to go overseas and you expected them to stay together for the entirety of the trip?
And if I got one SXmini working, but the other I didn't, shouldn't we assume that... Never mind.
I have a strong feeling this is going to be a long ordeal with customer service, and one I may end up eating the cost on to avoid absolute frustration...
I'm sorry to hear that it got complicated.Sooo, I was super psyched with Ecigone at first, but their delivery has been anything short of impressive. Part of it isn't their fault, and part of it definitely is.
I originally ordered 2 SXmini's and an Ultroner Alieno Stabwood. I then created another order for a dotshell and the adapter, and asked if I could append it to the previous order since the original order was still waiting to ship because of pre-order. I get the okay, pay for the second shipment, and everything should be hunky dory.
The package arrives and the Alieno and one of the SXmini's works as intended, while the 2nd SXmini doesn't turn on. No dotshell or adapter to be found. I email Ecigone and mention the package arrived and that one of the SXmini's doesn't turn on while the other works fine. And also asked about the second part of the order.
The response I got was...
View attachment 984958
Stapled? You stapled two packages together to go overseas and you expected them to stay together for the entirety of the trip?
And if I got one SXmini working, but the other I didn't, shouldn't we assume that... Never mind.
I have a strong feeling this is going to be a long ordeal with customer service, and one I may end up eating the cost on to avoid absolute frustration...
We have to be on them until they sort things out, and now in these Chinese times we have to try our best, make a Hall of Fame and a Hall of Shame list.
I have a couple sbs kits coming from them already.
I had a positive experience ordering the Alieno from them and later was going to order an sxmini and a couple accessories but they wanted $22 shipping. I placed the same order with vaping101 and shipping was only $12 and the item prices were basically the same.Sooo, I was super psyched with Ecigone at first, but their delivery has been anything short of impressive. Part of it isn't their fault, and part of it definitely is.
I originally ordered 2 SXmini's and an Ultroner Alieno Stabwood. I then created another order for a dotshell and the adapter, and asked if I could append it to the previous order since the original order was still waiting to ship because of pre-order. I get the okay, pay for the second shipment, and everything should be hunky dory.
The package arrives and the Alieno and one of the SXmini's works as intended, while the 2nd SXmini doesn't turn on. No dotshell or adapter to be found. I email Ecigone and mention the package arrived and that one of the SXmini's doesn't turn on while the other works fine. And also asked about the second part of the order.
The response I got was...
View attachment 984958
Stapled? You stapled two packages together to go overseas and you expected them to stay together for the entirety of the trip?
And if I got one SXmini working, but the other I didn't, shouldn't we assume that... Never mind.
I have a strong feeling this is going to be a long ordeal with customer service, and one I may end up eating the cost on to avoid absolute frustration...
The next thing on the purchasing plan is a good soldering station with quality tin.
I'm thinking a bit about the Weller WE 1010, does anyone have experience with a soldering station and Printed Circuit Board?
I'm thinking a bit about the Weller WE 1010, does anyone have experience with a soldering station and Printed Circuit Board?
Weller is a very good brand of soldering iron, the main thing would be to have an adjustable temperature control on the soldering station and of course it be comfortable looking to use
It has an adjustable temperature, is no bigger than 75w, but it should last a lot for small soldering like this.Weller is a very good brand of soldering iron, the main thing would be to have an adjustable temperature control on the soldering station and of course it be comfortable looking to use
Have already bought a soldering table with magnifying glass, crocodile clamps.
Weller makes good stuff. I’ve kept a weller butane powered iron in my tool case at work for years. I haven’t tried the WE1010 but am sure it’s good. I have one like this at work too.
FX888D-23BY
Largest stocking distributor of electronic supplies in the midwest. We can help you design enterprise data center structured cabling, power backup systems, analog and IP security camera systems, access control systems, public address systems, and under carpet wiring systems. We also stock analog...
www.eskc.com
Sounds like fun. Wish I was there. Was reading up on the Luderick, sounds like they're tasty too.
That's awesome Tor!!! I can't wait to see the mods you create.
After reading what Georg had to say about Norway, I'd like to visit your country too! I recently watched an excellent nature show on Norway. It's a very beautiful and amazing country.
Weller makes excellent gear. Back in the 80s I always used a Weller WP-25 soldering iron for mainframe computer PCB repairs in the field and in the shop. I still have and use it here and there.
Cmon down. I'll take you fishing and you can show me how to build a Kayfun
We'll do a cookup/vapeup waterside
Good morning folks,
Picked up a pack from ESG, have to empty the tank before it grows to 5.5ml.
Since shipping is shipping, I bought with something extra.
Parcel on way from Mod Dog:
Picked up a pack from ESG, have to empty the tank before it grows to 5.5ml.
Since shipping is shipping, I bought with something extra.
Parcel on way from Mod Dog:
Since shipping is shipping I bought 15 switch panels
Hello Shiny's
Gunmetal is pretty light and more of a matte shine than the qp mr rta (now on the Odin 100). I'll have to root around for a lighter gunmetal atty. Might just have to go with silver which looks okay thanks to the cut outs on the mod.
So hate posting pictures since the "upgrade".
Gunmetal is pretty light and more of a matte shine than the qp mr rta (now on the Odin 100). I'll have to root around for a lighter gunmetal atty. Might just have to go with silver which looks okay thanks to the cut outs on the mod.
So hate posting pictures since the "upgrade".
Similar threads
- Locked
