Fidola13

Totally Stashed!
Supporting Member
ECF Veteran
Verified Member
Dec 20, 2017
10,223
57,008
Boston
It is for sure! I was also even more impressed as the Mech was on sale for just £4.99, even though it was that cheap on sale where they are trying to get rid of them they still replaced it, top notch shop in that regard and makes me feel safe using them again, as I know if anything goes wrong with a mod they will help me out.
I obviously( I hope) meant vape shops.
 

Fidola13

Totally Stashed!
Supporting Member
ECF Veteran
Verified Member
Dec 20, 2017
10,223
57,008
Boston
How’s everyone’s weekend going? I did nothing vape wise yesterday except sit out in the sun and enjoy vaping. Today I’ve been a lazy slug. The most im going to do is top off my many rotation mods. I’ll leave the rewicking and building for the upcoming week.

I did look for a part for my Ultroner Aether which I can’t find anywhere which makes it unusable. I’m a bit bummed out. Especially since I don’t thrown ANY vape related items away. I’ve searched all my now very organized containers except for one. So I may give that a look see tonight otherwise I’m bummed out to have a nice little stabwood that I can’t use. If anyone has one ……

Question- so I bought this humongous 30mm THC Vortex RDA and for the life of me I don’t know how big the coils should be or if I even have any big enough! I’m really eager to just check it out for the fun of it!

Any suggestions as always are welcome!
 

hittman

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jul 13, 2009
    61,535
    179,715
    Somewhere between here and there
    How’s everyone’s weekend going? I did nothing vape wise yesterday except sit out in the sun and enjoy vaping. Today I’ve been a lazy slug. The most im going to do is top off my many rotation mods. I’ll leave the rewicking and building for the upcoming week.

    I did look for a part for my Ultroner Aether which I can’t find anywhere which makes it unusable. I’m a bit bummed out. Especially since I don’t thrown ANY vape related items away. I’ve searched all my now very organized containers except for one. So I may give that a look see tonight otherwise I’m bummed out to have a nice little stabwood that I can’t use. If anyone has one ……

    Question- so I bought this humongous 30mm THC Vortex RDA and for the life of me I don’t know how big the coils should be or if I even have any big enough! I’m really eager to just check it out for the fun of it!

    Any suggestions as always are welcome!
    I just used the included 3mm coils when I reviewed the vortex. I wasn’t that impressed. It’s not bad but I’m more of a single coil user.
     

    Letitia

    Citrus Junkie
    Supporting Member
    ECF Veteran
    Apr 2, 2017
    25,834
    136,718
    West Frankfort, IL
    I ended up buying 10 molis 21700s from battery junction. Good price. Thanks

    I really need a brain transplant! So not only did I order 10 21700s from one store I also ordered 10 more from another store. Add to that as I was looking for a mod accessory I found another unopened box of 10 18650s and 21700s.

    So if anyone is low on batteries let me know! Honest to god this is how I ended up with a houseful a quadruple vape items!

    Well at least I’m well stocked on batteries now as I sell off a good number of devices!

    I’ve got lots of RDAs that I have MANY of that I’ll be listing soon too.

    I’m still wondering what to do with that Dani 21700. Any ideas of a price from those that know anything about them? I guess I could put a tank on it and try to figure out how to use it but with my limited cognitive abilities lately I doubt it will go very well. o_O !
    Put the new batteries you don’t need in your current rotation in the refrigerator and date the box, plastic would be better. Date the batteries when you actually put them in rotation. Set a reminder to take them out once or twice a year to check they aren't charged lower than 3.7. If they are lower then just charge back to 3.7 and put back in the fridge. They'll last for many years.
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    I just used the included 3mm coils when I reviewed the vortex. I wasn’t that impressed. It’s not bad but I’m more of a single coil user.
    Yeah I hear you. I’m kind of surprised that I bought but it was on the less expensive side on a different forum so I thought I’d give it a shot.

    I went from a rabid dual coil RBA several years ago to now a feral single coil user for the past I dunno 2 maybe 3 years. I think the first Reload I bought and a couple of Nitrous’s used with single coil style really not just pushed me over the ledge but hurled me over to the other side.

    I may have to admit that I was a bit of a dual coil user snob lol! But in general I couldn’t be happier. I’m getting better flavor imo and large dense clouds that I thought I’d lose using single coils. Boy was I wrong.

    From 22mm Avocados to a few smallish 24 mm attys I’ve got everything and more than what I was chasing with dual coils.

    I dare anyone try to take my Reloads , Nitrouses to even the dead rabbit Solos lol! It ain’t happening ha ha ha! I’m a single coils lover now. Wish it had happened sooner then I’d have more of the oldies but goodies in my stash.

    When I update my RDA list in the classies it will be very obvious that they will be 99.9% dual atties lol!,

    Don’t Touch My Singles lol! And for this who haven’t seen a Vortex before here’s a pic. I’m going to use it on an Asmodus Amighty. My choices are few. But even on that it looks kinda ridiculous lol! It may end up on the list too once I give it a ride.


    You’d think they would include some chunkier coils for first use right? I may try it out just as a dripper before swapping out pins etc…

    I think this might be the only mod I have left that would “fit” a 30 mm RDA on it. It looks silly to me but I’ll give it a twirl. Maybe that’s what I’ll do vape related tomorrow. I almost never buy stuff with watching or reading reviews on them but I was totally ignorant about this monster!
    IMG_0832.jpeg

    Put the new batteries you don’t need in your current rotation in the refrigerator and date the box, plastic would be better. Date the batteries when you actually put them in rotation. Set a reminder to take them out once or twice a year to check they aren't charged lower than 3.7. If they are lower then just charge back to 3.7 and put back in the fridge. They'll last for many years.
    What a great idea! Thanks so much. Just to clarify- refrigerator NOT freezer.
    IMG_0263.jpeg
    IMG_0264.jpeg
     

    Letitia

    Citrus Junkie
    Supporting Member
    ECF Veteran
    Apr 2, 2017
    25,834
    136,718
    West Frankfort, IL
    Yeah I hear you. I’m kind of surprised that I bought but it was on the less expensive side on a different forum so I thought I’d give it a shot.

    I went from a rabid dual coil RBA several years ago to now a feral single coil user for the past I dunno 2 maybe 3 years. I think the first Reload I bought and a couple of Nitrous’s used with single coil style really not just pushed me over the ledge but hurled me over to the other side.

    I may have to admit that I was a bit of a dual coil user snob lol! But in general I couldn’t be happier. I’m getting better flavor imo and large dense clouds that I thought I’d lose using single coils. Boy was I wrong.

    From 22mm Avocados to a few smallish 24 mm attys I’ve got everything and more than what I was chasing with dual coils.

    I dare anyone try to take my Reloads , Nitrouses to even the dead rabbit Solos lol! It ain’t happening ha ha ha! I’m a single coils lover now. Wish it had happened sooner then I’d have more of the oldies but goodies in my stash.

    When I update my RDA list in the classies it will be very obvious that they will be 99.9% dual atties lol!,

    Don’t Touch My Singles lol! And for this who haven’t seen a Vortex before here’s a pic. I’m going to use it on an Asmodus Amighty. My choices are few. But even on that it looks kinda ridiculous lol! It may end up on the list too once I give it a ride.


    You’d think they would include some chunkier coils for first use right? I may try it out just as a dripper before swapping out pins etc…

    I think this might be the only mod I have left that would “fit” a 30 mm RDA on it. It looks silly to me but I’ll give it a twirl. Maybe that’s what I’ll do vape related tomorrow. I almost never buy stuff with watching or reading reviews on them but I was totally ignorant about this monster!
    View attachment 1026495

    What a great idea! Thanks so much. Just to clarify- refrigerator NOT freezer. View attachment 1026496View attachment 1026497
    Yes refrigerator!
    Personally I'd go with 3.5-4 mm coils in the beast.
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,535
    179,715
    Somewhere between here and there
    Yeah I hear you. I’m kind of surprised that I bought but it was on the less expensive side on a different forum so I thought I’d give it a shot.

    I went from a rabid dual coil RBA several years ago to now a feral single coil user for the past I dunno 2 maybe 3 years. I think the first Reload I bought and a couple of Nitrous’s used with single coil style really not just pushed me over the ledge but hurled me over to the other side.

    I may have to admit that I was a bit of a dual coil user snob lol! But in general I couldn’t be happier. I’m getting better flavor imo and large dense clouds that I thought I’d lose using single coils. Boy was I wrong.

    From 22mm Avocados to a few smallish 24 mm attys I’ve got everything and more than what I was chasing with dual coils.

    I dare anyone try to take my Reloads , Nitrouses to even the dead rabbit Solos lol! It ain’t happening ha ha ha! I’m a single coils lover now. Wish it had happened sooner then I’d have more of the oldies but goodies in my stash.

    When I update my RDA list in the classies it will be very obvious that they will be 99.9% dual atties lol!,

    Don’t Touch My Singles lol! And for this who haven’t seen a Vortex before here’s a pic. I’m going to use it on an Asmodus Amighty. My choices are few. But even on that it looks kinda ridiculous lol! It may end up on the list too once I give it a ride.


    You’d think they would include some chunkier coils for first use right? I may try it out just as a dripper before swapping out pins etc…

    I think this might be the only mod I have left that would “fit” a 30 mm RDA on it. It looks silly to me but I’ll give it a twirl. Maybe that’s what I’ll do vape related tomorrow. I almost never buy stuff with watching or reading reviews on them but I was totally ignorant about this monster!
    View attachment 1026495

    What a great idea! Thanks so much. Just to clarify- refrigerator NOT freezer. View attachment 1026496View attachment 1026497
    It fits on the Riva Dna250c
     

    DavidOck

    ECF Guru
    Supporting Member
    ECF Veteran
    Jan 3, 2013
    21,239
    178,481
    Halfway to Paradise, WA
    I have found that some of the best atties are the oldies but goodies!

    Don't drip or squonk, but yep, KF2L for the win :)

    Has anyone ordered from element vape recently?

    Actually, yes. Won a Caliburn G3 Pro pod mod here recently, it came with pods too low for my tastes, so ordered some higher resistance ones from them. A tad slower on delivery than other shops, but no problems at all. (And it wasn't really slow, just not really fast :) )
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,343
    88,205
    New Zealand
    Morning shinies ;)

    Put the new batteries you don’t need in your current rotation in the refrigerator and date the box, plastic would be better. Date the batteries when you actually put them in rotation. Set a reminder to take them out once or twice a year to check they aren't charged lower than 3.7. If they are lower then just charge back to 3.7 and put back in the fridge. They'll last for many years.

    Learnt something new today, had no idea you could store batteries in the fridge. But since I have waaaaaaaaaaaaaaaaaaaaaaaaaaaaaaay too many setups running, my battery rotation is spot on.
     

    Letitia

    Citrus Junkie
    Supporting Member
    ECF Veteran
    Apr 2, 2017
    25,834
    136,718
    West Frankfort, IL
    Hey wait! You’re not that far from me I think and it’s rainy and cold 13 miles south of Boston! Im jealous!
    I'm in southern IL, more than a few miles south of you lol. Sunny 58° atm, should hit 70° around 4pm.
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    Afternoon Shinys! I’m determined to sell as many of the mods I don’t use/want so I keep updating my lists. I’m kinda addicted to this selling stuff. I don’t know what I’ll do when I’ve actually sold all the mods/atties in my Sell containers lol! I’ve actually been looking through my Keep containers just to see if I can sell anything more lol!

    I don’t know why because it’s a pita honestly! But it is kind of a nice feeling to look at my stash and see that it’s gotten much more under control. I hope I don’t regret it. I haven’t really sold any squonk mods except a couple of Pico Squeezes that I didn’t like. I’ll only go so far and my squonk mods and several of my favorite stabwoods is where I draw the line!

    I try not to think of the money I spent and that I’m losing but things aren’t great and every little thing helps. At least that’s what I keep telling myself!
     

    Users who are viewing this thread