Skunk!

Vaping Master
ECF Veteran
Jan 25, 2014
5,569
41,760
Las Vegas
Ah nice, it looks great, it's just too bad I don't have any good 22mm RDAs. There are a lot of solid older mechs out there for cheap these days.
The Vanilla comes in 22mm 18650 or 28mm 26650. I wish they would come out with a 24 or 25mm. Vanilla. They are one of my favorite old mechmods. Of the new mechs I really like the Dominus Side Fire 24mm.
 

irradiated

Full Member
Verified Member
Jan 3, 2018
23
83
Canada
The Vanilla comes in 22mm 18650 or 28mm 26650. I wish they would come out with a 24 or 25mm. Vanilla. They are one of my favorite old mechmods. Of the new mechs I really like the Dominus Side Fire 24mm.

The 28mm would pair nicely with my 28mm Sherman rta. :D 26650 might be adding too much to my already large selection of batteries though. :lol:

A lot of 22mm atties don't appeal to me, I haven't seen one that's really jumped out at me as 'I have to have that', except maybe some of the MTL RTAs in 22mm. Most of the RDAs are 3-post designs and such that I don't like.

I haven't heard of the Dominus, I'll have to take a peek at that. I'm not sure what my next tube mech is going to be, I'm still debating whether I should get another tube or a parallel box. I love tubes, but I don't have a parallel box yet...
 

Skunk!

Vaping Master
ECF Veteran
Jan 25, 2014
5,569
41,760
Las Vegas
The 28mm would pair nicely with my 28mm Sherman RTA. :D 26650 might be adding too much to my already large selection of batteries though. :lol:

A lot of 22mm atties don't appeal to me, I haven't seen one that's really jumped out at me as 'I have to have that', except maybe some of the MTL RTAs in 22mm. Most of the RDAs are 3-post designs and such that I don't like.

I haven't heard of the Dominus, I'll have to take a peek at that. I'm not sure what my next tube mech is going to be, I'm still debating whether I should get another tube or a parallel box. I love tubes, but I don't have a parallel box yet...
Dominus Mods - Dominus 24 Mechanical Mod - Copper
This is from one of the stores in Chinatown. They have one in the store with engraving I like better. Could probably find it cheaper elsewhere. I like the sidefire. Reminds me of an updated version of an old Sigelei mech. 24mm.
 

irradiated

Full Member
Verified Member
Jan 3, 2018
23
83
Canada
Dominus Mods - Dominus 24 Mechanical Mod - Copper
This is from one of the stores in Chinatown. They have one in the store with engraving I like better. Could probably find it cheaper elsewhere. I like the sidefire. Reminds me of an updated version of an old Sigelei mech. 24mm.

That's a really beautiful mod. I've never tried a side fire tube, only bottom fire, but it kind of reminds me of a pipe for some reason. That's another thing I've kind of always wanted, a nice 18650 24mm pipe mod.. that doesn't cost an arm and a leg.

Right now, I'm kind of leaning towards something like a brass Able, or a brass Roundhouse 2 24, or a brass El Thunder, but there's SO many nice mods out there. More than I could ever afford to own.. :lol:
 

Skunk!

Vaping Master
ECF Veteran
Jan 25, 2014
5,569
41,760
Las Vegas
The 28mm would pair nicely with my 28mm Sherman RTA. :D 26650 might be adding too much to my already large selection of batteries though. :lol:

A lot of 22mm atties don't appeal to me, I haven't seen one that's really jumped out at me as 'I have to have that', except maybe some of the MTL RTAs in 22mm. Most of the RDAs are 3-post designs and such that I don't like.

I haven't heard of the Dominus, I'll have to take a peek at that. I'm not sure what my next tube mech is going to be, I'm still debating whether I should get another tube or a parallel box. I love tubes, but I don't have a parallel box yet...
Since I got a Dead Rabbit I really haven't wanted to mess with the 3 post 22mm anymore. I keep those for sentimental value. The Asmodus Klone and Doge 2 setup was my EDC for a couple years. I have a Minikin V2 and DR as my new EDC. I want the Asmodus Luna Squonk box for my next mod.
 

Skunk!

Vaping Master
ECF Veteran
Jan 25, 2014
5,569
41,760
Las Vegas
That's a really beautiful mod. I've never tried a side fire tube, only bottom fire, but it kind of reminds me of a pipe for some reason. That's another thing I've kind of always wanted, a nice 18650 24mm pipe mod.. that doesn't cost an arm and a leg.

Right now, I'm kind of leaning towards something like a brass Able, or a brass Roundhouse 2 24, or a brass El Thunder, but there's SO many nice mods out there. More than I could ever afford to own.. :lol:
I love side button tubes. The button is real easy to push with a pinky. They have a screw down lock on em. This button assembly is pretty simple looking and can be bought separately and used to replace bottom button on their other mods. I checked out the one they had in the store and it was verrry nice. I loved the engraving on it. I imagine it will be there for a while. Not too many people are willing to spend $200+ On a tube mech these days.
 
Last edited:

Opinionated

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2015
11,168
59,365
56
My Mountain
Is any one brand different from another? I'm going to try it. Sometimes another sweeter flavor just doesn't work out and I am loathe to try another sucralose. I don't like stevia in any application I've tried it in like coffee or desserts so I doubt I'd like it in juice either.

Nude Nicotine is the only place I know of that carries it... so that is where I buy mine, and consequently the only one I've ever used.

Erythritol Solution (5%) - Nude Nicotine
 

Opinionated

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2015
11,168
59,365
56
My Mountain

Coastal Cowboy

This aggression will not stand, man!
ECF Veteran
Verified Member
Jun 13, 2013
5,975
21,941
63
Alabama Gulf Coast
www.ibleedcrimsonred.com
They look good.
On mechs though I tend to be higher than 50w.
Think that's why the Therion seems kinda weak to me at the moment.

@Opinionated , I hear you, but I loved it.
Who knows what I'll do, but as far as vaping I'm no longer in a happy place. Bugging the crap out of me too.

Sucks that the custom is almost exactly the same size. I'd swap copper for silver just cause I could. I could keep the mod and just send the door back and wait. I'm kinda ...... at them though so willing to cut my nose off on this one to spite my face.
I felt bad right after posting that. Schadenfrued is a sin, man.

I have learned to build right and get a toe curler from them. The twisted 28 SS @0.35-ish is really, really good.

Single battery devices always and everywhere have the same issue--you get the highest output by killing your lone cell. VV, VW, TC, unregulated. They're all limited by CDR, mAh or both.
 

jfcooley

I find your lack of faith disturbing...
ECF Veteran
Verified Member
Aug 22, 2017
5,134
31,158
Charlottesville, Virginia
I felt bad right after posting that. Schadenfrued is a sin, man.

I have learned to build right and get a toe curler from them. The twisted 28 SS @0.35-ish is really, really good.

Single battery devices always and everywhere have the same issue--you get the highest output by killing your lone cell. VV, VW, TC, unregulated. They're all limited by CDR, mAh or both.
Well, I could build to get something good from another device. I tend to stay between .2 and .3. At this point it's all mental.

The dot was great. Felt good to hold, I liked the looks for the most part (not a fan of logos). Absolutely love the bottle and 20700. I could use it all day and be satisfied with battery life. It was just good.

I'm in a funk. Like I said it's all mental. Disappointed my dot died, disappointed my custom got jacked up, just...blah.

I'm sure I'll get over it.
 

Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,860
136,896
West Frankfort, IL

Opinionated

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2015
11,168
59,365
56
My Mountain
Not any cheaper if I have to buy the polycone caps separately. I can live with 1.12 per for something that can outlive me.
Thanks for the NN erythritol heads up.

You can probably find those bottles with the polycone caps on ebay.. I just picked those two ads out because i like the dropper tops.. lol.. you can look and see if there aren't some on ebay with the caps you like though.. :)

No problem on the NN link..
 

Skunk!

Vaping Master
ECF Veteran
Jan 25, 2014
5,569
41,760
Las Vegas
Ah nice, it looks great, it's just too bad I don't have any good 22mm RDAs. There are a lot of solid older mechs out there for cheap these days.
Like this.
Cartel Boss 26650 Mod
Cartel were my favorite mechs. I am not sure of the top diameter but it is tapered. The 18650 tapers a little to fit 22mm though. Very nice mod for $225 off
 

JamesDMad

Ultra Member
ECF Veteran
Verified Member
Feb 21, 2018
1,313
7,802
67
Indiana
Since this is the Shinyitis group and since I'm only am a short timer, Who is the the King/Queen of the most mods and Attys owned.... I'm thinking some of the veterans must have a vast inventory by now..
Was the receiver of (why do you have so many? you can only puff on one at a time) :pop:
 
Last edited:

DancingHeretik

Dancing in the Chaos
ECF Veteran
Verified Member
Mar 20, 2011
8,837
62,106
San Antonio, TX
Since this is the Shinyitis group and since I'm only am a short timer, Who is the the King/Queen of the most mods and Atomizers owned.... I'm thinking some of the veterans must have a vast inventory by now..
Was the receiver of (why do you have so many? you can only puff on one at a time) :pop:
I believe it's @Shawn Hoefer.
 

Users who are viewing this thread