Just please do not plug it into a USB wall wart charger, especially one from Samsung. We don’t want you to become another victim of the Reddit trolls pointing their finger at anything and everything other than the obvious misuse.
Just please do not plug it into a USB wall wart charger, especially one from Samsung. We don’t want you to become another victim of the Reddit trolls pointing their finger at anything and everything other than the obvious misuse.
Mine get divorced if one has to go to another mod. I guess I’m old fashioned. Battery boxes are even marked married or divorced so I don’t grab the wrong ones. If I see a charging irregularity, I “widow” the keeper and recycle the offender. Maybe I take battery safety too seriously. I just know if I burn the house down, my hubs will put my vape gear through the wood chipper
Same here. Mine are marked with #s (so I can reverse them every cycle in series mods), the date I began using them, and then a symbol on married pairs w/ a matching symbol on their battery box.
I might be slightly CDO......
Most Samsung high output wall warts have a second pin that is used for the higher output.
Unless you are using a corresponding cable that utilizes that second pin it will output at a lower power level.
Just an FYI.
You could, but it’s a 24 I thinkSweet! I'll have to add it to the ever growing list
No worries, I’m overly cautious. I’m fine with a slow charge. I have enough mods to keep me busy. Plus, no Samsung products here, so no offensive wall warts
Most Samsung high output wall warts have a second pin that is used for the higher output.
Unless you are using a corresponding cable that utilizes that second pin it will output at a lower power level.
Just an FYI.
That is not the case for all their Fast Charger’s – older ones can be used with any cable and will output at a higher rate than your typical USB. I have used Samsung Fast chargers with a multitude of cables (cause my cat loves to chew them) on multitude of devices, even a Vaporesso mod that was used out of desperation to which it got extremely hot.
I get more of a kick out of all the people who charge batteries or mods overnight and unattended...
Don't know about all of them, but Samsung began doing this about the same time their original tablets came out many many moons ago.
Last Samsung device I purchased was the S7 and have used its charger with the supplied short cable from one of my Vaporesso mods. Like I said, it got dangerously hot.
Nice. I was asking 22 but hoping 24. Most of my newer stuff is 24mm and up so that is good to hear. I don't like overhang.
Or phones. I unplug the hubs every night before I go to sleep ( 4 hours after him). He thinks I’m being a worrywart.
I believe that 100%.
As I said, many are that way. I can't attest to all of them.
That happens with many mods, regardless of the wall wart used as well.
Now you have me... 1 amp is ok?
I wouldn't go over one amp personally, but that's just me.
I prefer slow and low. I have some old 1/2 and 3/4 amp ones I use if I have to use one.
Most newer devices come with 1 amp or higher nowadays.
That much is fine
I wouldn't have noticed if you hadn't pointed it out. 24mm would fit perfectly flush.
I no longer use plug in chargers for my phone(s). One you go wireless it’s difficult to go back. But have no problem dropping my phone on the wireless Q-charger pod overnight. It’s blue LED provides a nice night-light and keeps the boogie man away. And it shuts off when fully charged (also charges at a lower rate)
We all have our own ways of dealing with risk – as long as you operate within the specified levels of said device we should be safe. Personally, I have no issues with integrated battery mods, but do think mod manufactures should provide a qualified charger even if there is an added cost. This would reduce the temptation (be it through ignorance or not) on using an external charger that could prove to be disastrous.
We all have our own ways of dealing with risk – as long as you operate within the specified levels of said device we should be safe. Personally, I have no issues with integrated battery mods, but do think mod manufactures should provide a qualified charger even if there is an added cost. This would reduce the temptation (be it through ignorance or not) on using an external charger that could prove to be disastrous.
The Fatality looks too big on the SL for my taste. I think it's probably bigger than the Minikin. I'm gonna release it back into the wild.
Similar threads
- Locked
