Shinyitis Support Group

[raqball]

The ceramic euc coils are very much no fuss with a very long life span. My daily rebuildable vapes need to have coils cleaned and rewicked nearly daily, this is not an issue with the eucs.

No clue on the eucs as I've honestly never even heard of it... If @TrollDragon won an authentic BB then it comes with a bridge in the box these days.... The included bridge is similar to the Kangaroo and takes Kanger coils..

When I was using rebuildables in the BB I'd rewick about every week or so but I vape plain vg/pg base. The only downer I see with rebuildable options in the BB is there really is no way to dry burn the coils for cleaning.

Taking a rebuildable out and putting it back in? No difference than if using a bridge..

 

[stols001]

Yep I think that is what I have, it's what the husband has and I think it's bacterial so I was not gonna go in and inflict it on all my co-workers either. Gotta buy a basic full size laptop mine dired. So.... After my appointment I gotta go somewhere. No Amazon for me unfortunately. Taking suggestions and also hoping. My doctor puts me out an extra day. F reals. Also there is 3 inches of snow on my car and not looking forward to that!

All this lack of free will stuff has really messed me up.

Ann

Sent from my moto z3 using Tapatalk

 

[Eskie]

Too big for me, but I definitely appreciate the thought and planning that went into it. Kudos to the designer. Love love my Topside

I watched it. Still very unsure on the shape and battery choice. He did say there's a "premium" version in about a month and a half that will have different materials and a Yihi chip. Of course it's going to depend on the chip, new materials, battery choice (if that's changed) and the price. I'll be sitting it out until that gets posted. A single 40T works just fine for me and a dual 18650 offers no real advantage. But we'll see.

 

[Tralfaz]

First vape mail in a while. @Tralfaz show me your ways.

View attachment 789663

Looking good!

My setup this morning.

 

[AngeNZ]

Morning shinies

 

[Sickbxy]

No clue on the eucs as I've honestly never even heard of it... If @TrollDragon won an authentic BB then it comes with a bridge in the box these days.... The included bridge is similar to the Kangaroo and takes Kanger coils..

When I was using rebuildables in the BB I'd rewick about every week or so but I vape plain vg/pg base. The only downer I see with rebuildable options in the BB is there really is no way to dry burn the coils for cleaning.

Taking a rebuildable out and putting it back in? No difference than if using a bridge..

Not being able to dry burn easily was my biggest issue. The Vapeshell allows it, but it was a pita. The MF bridge allows for the use of Vapresso ceramic coils, way better than the Kanger coils and they last for a looong time, with reports of them lasting a month on a daily driver.
Review - Written Review - Modfactory Billet Box Bridge

 

[raqball]

Not being able to dry burn easily was my biggest issue. The Vapeshell allows it, but it was a pita. The MF bridge allows for the use of Vapresso ceramic coils, way better than the Kanger coils and they last for a looong time, with reports of them lasting a month on a daily driver.
Review - Written Review - Modfactory Billet Box Bridge

My main gripe with the bridges is really my own stupidity... At least twice, maybe more, I've forgotten to take the adapter off the coil when swapping them out. This results in me, once I notice I no haz it for the new coil, dumpster diving in the trash can to find the discarded coil so I can retrieve the adapter from it....

I looked at that review and it does look like a sweet option for a bridge'd BB... I assume it also uses the adapter on the bottom of the coil?

 

[Heartsdelight]

I'm dying and yeah we all are, but it all is super noticeable.l called out sick that is how bad is was and I do not even regret it.

Sent from my moto z3 using Tapatalk

Hope you feel better!

 

[diagrammatiks]

I watched it. Still very unsure on the shape and battery choice. He did say there's a "premium" version in about a month and a half that will have different materials and a Yihi chip. Of course it's going to depend on the chip, new materials, battery choice (if that's changed) and the price. I'll be sitting it out until that gets posted. A single 40T works just fine for me and a dual 18650 offers no real advantage. But we'll see.

Omigod really. A yihi topside? Yes please. Where did he say that?

 

[TrollDragon]

No clue on the eucs as I've honestly never even heard of it... If @TrollDragon won an authentic BB then it comes with a bridge in the box these days.... The included bridge is similar to the Kangaroo and takes Kanger coils..

It's supposed to be authentic and fully "decked out", I've asked the raffle host and store owner for any details but haven't heard back yet.

We shall see what is what, I'd rather do a rebuildable as I haven't used blister pack coils in years. But those EUC coils do look quite tempting, we only have the 0.4 ohm (40W-50W) ones in the shop and it would be cost effective to bring in a higher resistance version.

 

[Heartsdelight]

Thank goodness Fasttech is back to normal shipping times. Ordered 12/20 delivered today. I got a Juggernot Mini Rta clone as I already have the authentic one in black. It’s suppose to be an Ulton clone & from what I can see it’s real nice.

 

[raqball]

It's supposed to be authentic and fully "decked out", I've asked the raffle host and store owner for any details but haven't heard back yet.

We shall see what is what, I'd rather do a rebuildable as I haven't used blister pack coils in years. But those EUC coils do look quite tempting, we only have the 0.4 ohm (40W-50W) ones in the shop and it would be cost effective to bring in a higher resistance version.

Congrats on the win! It will come with a bridge in the box that takes Kangers.. Aside from that, my comments in the BB thread are over a year and a half old so there may be better rebuildables out for it now...

The ones I tested and commented on are still viable options though and I assume are still for sale.. I really liked the Doggy and the Exocet.. But if you want restricted then I found the Insider to be best for that..

I think one of them, can't remember which, had an adapter so you could connect to a mod for dry burn. Off the top of my head I can't remember which it was,.,

Maybe hit up the peeps in the BB thread for current recommendations. Great bunch over there in that thread too..

 

[Eskie]

Omigod really. A yihi topside? Yes please. Where did he say that?

Towards the end of the video. He even makes a point of if you're the type of person who would prefer a more premium version then wait it out. He flat out states he didn't want to have folks buy the dual then get all ...... off 6 weeks later when that dropped. Props to him for that.

Oh, there was also some confusion as to materials as he kept saying aluminum but the spec on freeze frame said zinc alloy. Obviously a big deal for weight difference with something already pretty chunky. He answered my YT post in like an hour to clarify the body is aluminum and the top and bottom plates zinc alloy. That's again something else to give props for, quick and accurate reply without any issues or evasions. Let's face it, that's still unusual in this business for a manufacturer, and in this case the designer to own their products as they are, not as they want you to think it is.

It's supposed to be authentic and fully "decked out", I've asked the raffle host and store owner for any details but haven't heard back yet.

We shall see what is what, I'd rather do a rebuildable as I haven't used blister pack coils in years. But those EUC coils do look quite tempting, we only have the 0.4 ohm (40W-50W) ones in the shop and it would be cost effective to bring in a higher resistance version.

I don't have a BB, but I have used those EUC coils in a BVC sleeve in tanks and it's a very good ceramic product. Excellent coil life and solid flavor. Too bad I lost the sleeve (probably chucked it thinking it was an old coil) as it was worth using.

 

[Sickbxy]

I looked at that review and it does look like a sweet option for a bridge'd BB... I assume it also uses the adapter on the bottom of the coil?

Coils are cheap, $10 for a 5 pack which will last forever. Here is the build tutorial.


I got mine from Friendly Flippers
https://friendlyflipper.com/product/mf-billetboxbridge-full-kit/

 

[Tralfaz]

Been a while since I've seen this. I remembered it differently.

 

[chanelvaps]

View attachment 789675 Thank goodness Fasttech is back to normal shipping times. Ordered 12/20 delivered today. I got a Juggernot Mini Rta clone as I already have the authentic one in black. It’s suppose to be an Ulton clone & from what I can see it’s real nice.

I have two of them, one black and one silver and I like them. Full size, not mini

 

[Tralfaz]

Minor vape mail today. My new two post Anarchist MFG Riot RDA showed up today. I yoinked the silly ceramic insert out to give it a little deeper juice well, installed some Ni80 framed staples and put it on my Brizo.

 

[Tralfaz]

Total lint and fingerprint magnet.

Love that AFC though.

 

[Punk In Drublic]

Love that AFC though.

 

[Sickbxy]

Yay! Vapemail! New ultem tank with matching condensation plug to house my MF bridge. The FF door came in, still waiting for my custom Juma doors.