Shinyitis Support Group

[lupinehorror]

morning all.
ecigone (UK) has 15% off all month with the code 15OFF.
sold some liquids so picked up some of the new sxmini mi pods, 3 triple mesh falcon coils, a gas mods nixon rda and some firebolt aglet cotton. £27 with free delivery.
should have $27 in FT gift certificates by tomorrow so that'll cover the slam piece clone. will need to decide on a chunky thing to sit on top of it.

 

[Eskie]

Happy Monday Shiners!

OK, that's cruel.

I never recommend marrying batteries bought from Hollywood area. They only last 1-6 months.

Or those impulsive battery setups that happen in Vegas.

 

[chanelvaps]

.

I don't have a Themis but a quick search found this post which may be of help. Paragraph two:
Digiflavour Themis top airflow rta
Hopefully it helps you out.

thank you for that. Not sure why I never search out answers. I just come here. LOL.

 

[charlie1465]

Wait until the mods start asking if the batteries are common law marriage, or the real thing.

Several of my married batteries have been deciding that they want to spend sometime alone without the other one too near but they usually come back after a few days..

I'm wondering what influence this will have on their lifespan as it's quite stressful

Damn these batteries are just so androgynous

 

[charlie1465]

Coils too high, watts too low, or too much pg have caused popping/spitting for me. I make all sorts of pg/vg ratios, so it does happen that I’ll grab the wrong one once in a while.

Well, I survived the grambino. She was so very good, a little bit of crying because she missed mommy, but considering she never had a chance to get to know me prior, she was a good sport. I’m completely pooped. Sacking out early, hope to get a handle on my insanely overgrown yard tomorrow. Please no rain!

What a stalwart Grandma....10 brownie points for you definitely

 

[charlie1465]

Please post over at our Stabwood thread for all to see!!!! It’s beautiful! Love the faceplate with those colors!!

And @stols001 check out the drag polishing thread to see how to get that mirror finish. It'll look stunning

 

[Hightech Redneck]

@stols001
Just saw a news story about the new trend of c.d yoga. (.=b if no coffee yet lol)
They say it works better because you relax before you focus your body and mind.

I dont yoga, fan of downward dog but......

Just thought you might find that story interesting.

 

[charlie1465]

I love the Inbox/B2K combo it's always with me, the Furyan is a great squonker and I'm still looking for the perfect RSA for it. The Aequitas that's on there now is functional but it's nothing special, the inner AFC barrel is not removable and does accumulate condensation between it and the outer barrel. Designed by a rather annoying vape reviewer who states it was a year in the making, the ability to clean it should have been quite high on the priority list...

Yes i'm in love with my Furyan also....it's soon to get the full polish

As far as something as simple as an RDA/RSA goes it's bonkers that it can't be taken apart easily...I guess he (whoever he is) wanted to make sure their was a nice air gap as a heat sink.

 

[charlie1465]

morning all.
ecigone (UK) has 15% off all month with the code 15OFF.
sold some liquids so picked up some of the new sxmini mi pods, 3 triple mesh falcon coils, a gas mods nixon rda and some firebolt aglet cotton. £27 with free delivery.
should have $27 in FT gift certificates by tomorrow so that'll cover the slam piece clone. will need to decide on a chunky thing to sit on top of it.

Heeey, thanks for that i'll have a look. They're a good supplier IMO they always seem to have an interesting selection of stuff...and pricing is good too

 

[charlie1465]

Ahh, caught up...phew. Happy Mondays and hoping for a shiny Tuesday shinies

Hope everyone had a good weekend.

 

[stols001]

I never recommend marrying batteries bought from Hollywood area. They only last 1-6 months.

That's a good idea. I hear they adopt a lot of LGs.

Anna

 

[Vape Muppet]

Hello shiny fans. Hope everyone's having a nice day. Shiny Monday for me!

In addition to these three items, 2x 21700 batteries and 3 x 18650 batteries.

 

[TheProphet]

Morning Shinies.

BCF order still hasn't moved from PO acceptance last tuesday. Going to send them an email. At least my cloud chemist order is out for delivery.

 

[Letitia]

Hello shiny fans. Hope everyone's having a nice day. Shiny Monday for me!

In addition to these three items, 2x 21700 batteries and 3 x 18650 batteries.

View attachment 818953

Would be interested in your thoughts on the expromizer v4.

 

[Letitia]

Good morning Shiny's
Something has arrived at the Chicago hud, maybe dts. Have a couple ft orders floating around.

 

[Vape Muppet]

Would be interested in your thoughts on the expromizer v4.

Very well made, looks more premium than it actually is. Some stiff parts when new, a touch of VG on the O-rings and everything was fine. Deck is simple and easy to build on, decent screws. Wicking was also a doddle and you only need short wicks.

Juice flow is kind of weird because to turn it the tank has to be on your mod but it isn’t loose and won’t change accidentally. Just have to remember to close it before filling. Juice flow recommendations is one hole open for 50/50, two for 70VG and three for 80VG and higher.

Airflow kind of offers a RDL at the most open and proper genuine MTL when only using a few air holes. Three suits me very well. Two is super restrictive and one is sucking golf ball through straw tight.

Flavour for a top airflow RTA is really good. It won’t blow your mind but it’s very nice, good amount of heat too when using a 1.1ohm coil at 7.4W. Had some slight spit back but I think it was due to the juice flow being too far open and that has gone away since I closed it down a bit. Almost silent vaping too, very quiet RTA.

Been through two tanks worth this morning and I’d usually be one of the first to complain about 2ml capacity but I’m not going through the juice at anywhere near the rate I would on the True MTL or my Evl Reaper V3. So I’m happy with it. Plus tank extensions are coming out later.

Top fill is simple to use and unscrews without issue. Fill holes are large enough for shortfill size 50ml bottles. Airflow adjustment is a bit tight at present but it’s easy to do if you just stick one of your nails in there to help turn it.

Absolutely no leaks at all so providing you get used to the juice flow control, should be fine on an expensive mod. And I even like the drip tip.

I am extremely happy with it for a £35 tank.

 

[DeloresRose]

I have a couple fasttech orders that are not moving yet, otherwise no incoming shiny.

I love this Drone. It’s huge, but light for its size, everything is tight, no rattles, etc. I’d like to find a rda with a cap that matches the ultem, if I have to get it separately that’s alright. I thought I saw one somewhere but I can’t remember where.

 

[Letitia]

Very well made, looks more premium that it actually is. Some stiff parts when new, a touch of VG on the O-rings and everything was fine. Deck is simple and easy to build on, decent screws. Wicking was also a doddle and you only need short wicks.

Juice flow is kind of weird because to turn it the tank has to be on your mod but it’s isn’t loose and won’t change accidentally. Just have to remember to close it before filling. Juice flow recommendations is one hole open for 50/50, two for 70VG and three for 80VG and higher.

Airflow kind of offers a RDL at the most open and proper genuine MTL when only using a few air holes. Three suits me very well. Two is super restrictive and one is sucking golf ball through straw tight.

Flavour for a top airflow RTA is really good. It won’t blow your mind but it’s very nice, good amount of heat too when using a 1.1ohm coil at 7.4W. Had some slight spit back but I think it was due to the juice flow being too far open and that has gone away since I closed it down a bit. Almost silent vaping too, very quiet RTA.

Been through two tanks worth this morning and I’d usually be one of the first to complain about 2ml capacity but I’m not going through the juice at anywhere near the rate I would on the True MTL or my Evl Reaper V3. So I’m happy with it. Plus tank extensions are coming out later.

Top fill is simple to use and unscrews without issue. Fill holes are large enough for shortfill size 50ml bottles. Airflow adjustment is a bit tight at present but it’s easy to do if you just stick one of your nails in there to help turn it.

Absolutely no leaks at all so providing you get used to the juice flow control, should be fine on an expensive mod. And I even like the drip tip.

I am extremely happy with it for a £35 tank.

Thank you. Extension is already available for the authentic, might fit if the clone is a 1:1.

 

[Vape Muppet]

Thank you. Extension is already available for the authentic, might fit if the clone is a 1:1.

You're welcome. Where have you see the extension available to buy? I'm also curious as to why would you even want a clone of a German designed tank made in China.

 

[charlie1465]

I have a couple fasttech orders that are not moving yet, otherwise no incoming shiny.

I love this Drone. It’s huge, but light for its size, everything is tight, no rattles, etc. I’d like to find a rda with a cap that matches the ultem, if I have to get it separately that’s alright. I thought I saw one somewhere but I can’t remember where.

I'm really pleased that you like your Drone...i'm a big fan as you know and with a nice RSA on top it's a stonking dual battery squonker. Lovely vape the DNA 250C gives