DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,612
63,136
toledo ohio
YES, Sounds like our house. The original Quiet Riot group (Randy Rhoads and Kelly Garni) was born in our living room as my mom always allowed my brothers bands to jam at our house. My mom was also lending money to my friends that accidently got pregnant and needed abortions but could not go to their moms. She would leave the house on the weekends to go to her boyfriends and say (wink wink) "no parties here kids" and we would say "Of course not mom"
we would all be walking up and done the street on Sunday picking up the beer cans before she came home. The block parties with bands were legendary at our house. My mom knew. She told me years later, she knew. Neighbors would tell her. She was just glad we did not burn the house down.


I could tell stories... not sure what the statute of limitations are though, better just keep mum.
 
  • Love
Reactions: chanelvaps

Zazie

ECF Guru? No!
Supporting Member
ECF Veteran
Nov 2, 2018
10,799
72,391
Maine, USA
Good morning Shiny's! View attachment 840641 Has anyone heard from Charlie or SMT? I am concerned for them both, and miss them very much:wub:
I PM'd @ShowMeTwice the other day because I was worried and haven't had a reply, so I'm even more worried. At least we know why @charlie1465 has gone dark, and I choose to believe he is simply very sensibly focusing on his recovery. I sure do hope the treatment isn't being the horrible ordeal it can be, though.
 

Rob B.

Ultra Member
ECF Veteran
Jan 24, 2019
2,317
18,119
goodbye
I PM'd @ShowMeTwice the other day because I was worried and haven't had a reply, so I'm even more worried. At least we know why @charlie1465 has gone dark, and I choose to believe he is simply very sensibly focusing on his recovery. I sure do hope the treatment isn't being the horrible ordeal it can be, though.

Me too. Charlie's last post was Sept. 14, and SMT's last post was Sept. 11:(
 

Dr. Seuss

Super Member
ECF Veteran
Jul 15, 2019
320
1,190
I would like to get verified to use the classifieds. I would probably let it go for less than I paid for it. The only time that has been out of the box was to take pictures. :)
If it ever opens mark me down for a slot. I’m sure someone has some rdas in need of a good home where they’ll be taken care of.

We could set up a virtual colony and work in the delays due to mail. But even if we're doing it for each other for free, we'll have to go to the dark net to do it as even if we don't charge each other a penny we'd still be considered manufacturers. Then we still ave to worry about being infiltrated by undercover agents. No one here works for the FBI, right? If so, this really is me just being snarky, not serious.

(PM me for the secret plans. I'll call Saul now so we're covered, just in case)
That would be dope, I make some pretty nice coils....I mean, earrings. I make jewelery that’s pretty nice. I don’t scrimp on the shipping either, I pack them in cotton. Lots of cotton..

I feel like this thread is good luck because I’ll mention something and somehow it works out that I have it not before long so I’m going to mention a Kennedy Vindicator 21700 with the matching rda. SS with a copper button. I can’t decide on the CC button option though because I like the looks of the standard button, but I like the concept of the CC one. I’m not real sure if arching is an issue with that mod. Either way, gimme gimme..:banana::pop:
 

Dr. Seuss

Super Member
ECF Veteran
Jul 15, 2019
320
1,190
It’s doing it’s thang:thumb:

I haven’t tried the squonk bottle yet though, I’ve just been using it like a dripper. I can’t bring myself to risk getting it messy, I want to preserve the bottle and keep everything nice and clean. Once I get a back up bottle I’ll probably give it a go and then keep one for use and one for the stash.:cool:
 

AngeNZ

ShutterBug
Supporting Member
ECF Veteran
  • Mar 24, 2018
    11,530
    89,740
    New Zealand
    Morning shinies :wub:

    (PM me for the secret plans. I'll call Saul now so we're covered, just in case)

    I'm in with a grin to the virtual vapers club - I'm OCD about rewicking, whether it needs it or not - the slightest hint of black and I rewick :facepalm: So that can be my role ;)

    My nic river order is in the PO box waiting for me. Snuck in purilum creamy caramel and I can't wait to make a caramel ice cream with it :D
     

    Rob B.

    Ultra Member
    ECF Veteran
    Jan 24, 2019
    2,317
    18,119
    goodbye
    Hey all. I went to the dentist(who is a vaper) for my bi-annual a few weeks ago. She found a film on my teeth and tongue and asked me if I vape. I told her yes, and she told me that vaping creates a film on your teeth and tongue that contributes to vapers tongue, and that normal toothpaste will not remove it. She told me to brush my teeth and tongue with baking soda(yech!) once a week. So I have been, and she was spot on. Takes the film off both my teeth and tongue, and boy can I taste the flavors in my juice now. I had limited success with just brushing my tongue and getting some of the flavor taste back, but using the baking soda once a week really worked for me. YMMV, but I'd at least give it a try if you are having vapers tongue issues.:):thumb:
     

    NolaMel

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2012
    12,815
    80,994
    New Orleans
    Morning shinies :wub:



    I'm in with a grin to the virtual vapers club - I'm OCD about rewicking, whether it needs it or not - the slightest hint of black and I rewick :facepalm: So that can be my role ;)

    My nic river order is in the PO box waiting for me. Snuck in purilum creamy caramel and I can't wait to make a caramel ice cream with it :D
    I want the recipe for that!
     

    NolaMel

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2012
    12,815
    80,994
    New Orleans
    Hey all. I went to the dentist(who is a vaper) for my bi-annual a few weeks ago. She found a film on my teeth and tongue and asked me if I vape. I told her yes, and she told me that vaping creates a film on your teeth and tongue that contributes to vapers tongue, and that normal toothpaste will not remove it. She told me to brush my teeth and tongue with baking soda(yech!) once a week. So I have been, and she was spot on. Takes the film off both my teeth and tongue, and boy can I taste the flavors in my juice now. I had limited success with just brushing my tongue and getting some of the flavor taste back, but using the baking soda once a week really worked for me. YMMV, but I'd at least give it a try if you are having vapers tongue issues.:):thumb:
    My dental hygienist told me the same thing.
     

    DeloresRose

    Vaping Master
    ECF Veteran
    Apr 25, 2014
    8,612
    63,136
    toledo ohio
    Hey all. I went to the dentist(who is a vaper) for my bi-annual a few weeks ago. She found a film on my teeth and tongue and asked me if I vape. I told her yes, and she told me that vaping creates a film on your teeth and tongue that contributes to vapers tongue, and that normal toothpaste will not remove it. She told me to brush my teeth and tongue with baking soda(yech!) once a week. So I have been, and she was spot on. Takes the film off both my teeth and tongue, and boy can I taste the flavors in my juice now. I had limited success with just brushing my tongue and getting some of the flavor taste back, but using the baking soda once a week really worked for me. YMMV, but I'd at least give it a try if you are having vapers tongue issues.:):thumb:

    Iirc that was one of the fixes I’d read about here on ecf years ago.
     

    NolaMel

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2012
    12,815
    80,994
    New Orleans
    We could go old school and just go ICQ, or for real protection (still just being snarky if any non-vaper is reading through this looking for pointers/bootleggers) go with something like Proton Mail.
    Well, I’ll admit I have no idea what that is, but sign me up. Ummm, you’ll have to do that part for me :lol:
     

    Bigbob2322

    Vaping Master
    ECF Veteran
    Verified Member
  • Jul 27, 2014
    8,602
    23,576
    Schiller PK IL USA
    A couple of shiny items from GeekVape came in for me to review for them. Aegis Squonk and the Aegis X, both look great. Testing these 2 out will begin tomorrow, today was a living hell. Here's a few pictures of both.

    20190925_151818.jpg


    20190925_151630.jpg


    20190925_151910.jpg


    20190924_144236.jpg


    20190924_150905.jpg
     

    Tig7

    Super Member
    Aug 29, 2019
    362
    2,141
    Blue Ridge Mtns.
    We could go old school and just go ICQ, or for real protection (still just being snarky if any non-vaper is reading through this looking for pointers/bootleggers) go with something like Proton Mail.

    Proton Mail would be good it's anonymous just use VPN and no info would get out.
     

    Eskie

    ECF Guru
    ECF Veteran
    Verified Member
    May 6, 2016
    16,087
    77,744
    NY
    I'll be real interested in the squonk (big surprise). One of my questions with it is that juice flow connector part between the two halves whee you can swap it apart. How does it look? Does it seem likely it will stand up well over time? And how is it to clean out the mod?

    It's not like I need a regulated squonk I want to regularly drown, but a toughened up squonk might be nice to have.
     

    Users who are viewing this thread