steam crave hadron 220 dual 21700 yihi chipped mod?
i did. just over $70 shipped using code HGCC25 on heaven gifts.
shouldn't have but...excited wolf!
i did. just over $70 shipped using code HGCC25 on heaven gifts.
shouldn't have but...excited wolf!
They’re unreliable in the aspect that they may stop working. But they are also, generally, inexpensive, easy to use, and readily available. Those are important factors for new vapers.
I know I bought the cheapest stuff I could find, first time. I didn’t want to invest a lot of money not knowing if vaping would work for me.
Morning gang! I have no idea what I’m doing for Xmas so I’m trying to prepare for all the possibilities. Busy busy busy. I just want to get it over with so I can get back to my shiny stuff lol.
Coil Master DIY Kit V3
^^^ tools.
from this kit I use the mini tab ohms reader, the bent tweezers, the ceramic tip tweezers, the precision screw drivers, the scissors and the wire snips.. those are all must haves even if you dont buy the kit.
I love the coil winding portion but it doesn't work for all wire so you may end up not using it and just using the rods to wind around instead of the whole of the coil winding dealy bobber..
but the kit, (often had on Amazon for less money than a vape shop) makes everything handy in one case, and its cheaper to buy the kit than it is to buy each item separately if you don't have these things laying around your house already.
on top of that a wire brush will need purchased separately, for cleaning coils..
I am the opposite. It is all about buying what I can pay for at the time. With everything. I did get an inheritance a few years ago that makes it easier but even before that it was my motto and it has worked for me. Never had a car payment and never will. Why give my money to someone else (interest) when I could be earning with it. Even if it meant I drove older cars for years (or bought last years iPhone) Good luck to you with your method.
NO! Do not tell me that. I have to stay firm about not going back. My memory is getting bad but I think I did get a second Boro around the time I decided I was doneLike I said back then you should have got yourself another Boro....sometimes when the gasket gets stretched it's almost impossible to get it to work again.
You would have been fine with a new BoroI'm kind of sad that you gave up
Good morning shiners!
It's just 2 days until Christmas. How could you possibly have 100 posts since late yesterday afternoon? And I have to catch up on bunny pics too. Likes to all and I'll catch up sometime before midnight, I promise.
@Don29palms thank you on the offer! That's really kind of you. I'm not a coil snob, could care less what they look like only how they perform. I'd love to give them a spin, and will PM you on your generous offer. I hope I can figure out how to make them after seeing how they perform.
I'm honestly shocked you can get 12.5 ml out of a single battery mech, especially with low resistance, more than just a simple coil, let alone in a dual configuration. Your build sounds like a winner, so I have to try it out.
It's just 2 days until Christmas. How could you possibly have 100 posts since late yesterday afternoon? And I have to catch up on bunny pics too. Likes to all and I'll catch up sometime before midnight, I promise.
@Don29palms thank you on the offer! That's really kind of you. I'm not a coil snob, could care less what they look like only how they perform. I'd love to give them a spin, and will PM you on your generous offer. I hope I can figure out how to make them after seeing how they perform.
I'm honestly shocked you can get 12.5 ml out of a single battery mech, especially with low resistance, more than just a simple coil, let alone in a dual configuration. Your build sounds like a winner, so I have to try it out.
I forget where was it that everyone's getting this from? I think you told me before but I'm not good about knowing how to look up things in past postsTweet Tweet, Little Birdy Number 1 has arrived safe and sound
It's the Rose Finch...Brass Style
View attachment 859243
It's very small but very very nice
@DeloresRose fair enough. still, if you're new and it don't work once you could drop the whole thing. don't mean should be expensive_ just nothing known to be finnicky just because it's popular and marketed all over the place. i mean, how on earth did those smok stuff spread all over the place?
@Opinionated thanks for picking up on that. looks great. but terribly expensive probably because of the reader_ i know one never knows, but i don't see myself twisting my own; unless you're saying precoiled stuff are really unreliable and not that inexpensive as i've been led to believe.. other options?
you guys think it's alright if i settle for the available blue to put on SS uwell and black vprsso gen? stupid american consumerism hogging everything_ all the gold colours are in your dumbass warehouse
@Opinionated thanks for picking up on that. looks great. but terribly expensive probably because of the reader_ i know one never knows, but i don't see myself twisting my own; unless you're saying precoiled stuff are really unreliable and not that inexpensive as i've been led to believe.. other options?
you guys think it's alright if i settle for the available blue to put on SS uwell and black vprsso gen? stupid american consumerism hogging everything_ all the gold colours are in your dumbass warehouse
nah if your not making your own coils then just skip it. If you have a good regulated mod you can use that as your ohm reader until you can pick up a tab.. just remember to shut it off when your messing with the coil and/or not use metal tweezers on a coil that has power going to it or bad things will happen.
the tweezers will still come in handy, every home has scissors and each RTA comes with a little blue screw driver... the wire snips will come in super handy, they are needed.
So wire snips, bent metal and ceramic tipped tweezers, mini tab ohm reader..
So I literally just posted a thing saying that I got better service with the Chinese sigelei warranty than I did the American but I'm a damn liar. I just checked my email and they said send the device back and we will send another one to you just keep your tank keep your batteries cuz we're not replacing that we're just replacing the mod. I've got to say I am damn impressed so far I went through a whole lot more trying to warranty the last product 2 Element Vape. I do guess this means I have to pay for shipping but as long as it's cheaper than the $30 purchase price.
It looks like the American warranty service responded to the Chinese manufacturer forwarding my email.
It looks like the American warranty service responded to the Chinese manufacturer forwarding my email.
Last edited:
I only really sub ohm 3 mg juice at high wattages I never use pods. I have a pocket X by aspire for some 12 mg juice I won but don’t use it much. I’m just talking about the people that want to start vaping switching from smoking. I haven’t smoked in a long time and am satisfied with 3mg.
It is cute, a little structured for my taste. I am lusting over the newest Stella M chain bag and it is reversible.
Stella McCartney Falabella East-West Reversible Tote Bag with Perforated Logo
I am glad you are home and found something that makes you over the moon happy~Here's a shot of my tidy desk with the new set up.....I love, love, love this new power house. I feel very lucky
View attachment 859219
would a kit like the Vandy Vape Tool Kit Pro or the COil Master mini DIY kit be needless then? or low on the quality of the items i need? they're more reasonably priced.
any recommended kits?
i've found a better colour somewhere else and waiting to see what wotofo says, if they can ship the US one or cancel.
Has anyone ordered from Eciggity to Europe?
afternoon all.
after buying the fush and the hadron i got slapped with guilt and cancelled a wee $20 3F order. looking forward to the both of them but especially the hadron. not interested in the upcoming squonk pump attachment at the moment just beefy coils and the yihi board (sx490). no joystick on this one just three buttons.
half a day of work to go which will mostly involve changing the prices of over a thousand EPOS items. individually.
after buying the fush and the hadron i got slapped with guilt and cancelled a wee $20 3F order. looking forward to the both of them but especially the hadron. not interested in the upcoming squonk pump attachment at the moment just beefy coils and the yihi board (sx490). no joystick on this one just three buttons.
half a day of work to go which will mostly involve changing the prices of over a thousand EPOS items. individually.
All you actually need is ceramic tweezers, decent scissors, and a decent wire snip. FT has all for good prices. Would advise getting the coil master brand of the ceramic tweezers, worth the couple extra bucks.
Similar threads
- Locked
