Shinyitis Support Group

[Fidola13]

Well my first build of my supreme V2 didn't go too well. I obviously didn't use enough wick. It didn't leak exactly but it did flood the chamber.

I decided to go with the included post less deck and used a 3.5 Id single coil so that the wick would be nice and thick. I covered the wicking chambers pretty well but obviously not well enough. I do have the single coil deck but decided to go with the standard one after reading the comments from @TrollDragon. The post less deck is single coil really anyway. You could fit a dual set up in there but it would be very tight. Looks like I need to get the velocity deck.

I'll try again when I'm back at home again, I'll crack it with a bit more experimentation. I managed to get a few good pulls on it as it gradually flooded and the flavour and vape production was good if a bit airy. Closing down the juice flow control partially didn't help either.

Any ideas welcome.....??

Happy New Years Charlie!!! I have several aromizers inc the Supreme V2 with the velocity, postless and single coil decks I found on FT.
Have you watched Daniels video of the tutorial or checked out the Steam Crave forum. There was another tutorial there I found helpful. It was REALLY helpful and I never had problems again. Daniel also mentions that if you use a single coil it should be AT LEAST a 4mm id using LOTS of cotton to stuff up those large juice wells.

If you haven’t watched it it may save you a lot of headache especially since you’ll get all kinds of differing suggestions here. im not sure if this is the video I saw but maybe he’ll have some good ideas. Hope they help.

For some reason I can’t find Daniels video. Maybe someone else can pop in with it.

this is the video on the Steam Crave form
Help out with some common issues of wicking process in Aromamizer RDTA V1/V2 and Supeme.

 

[Ricky Vapes]

Toby tries to take down the German shepherds on Live PD and cops all the time. Doesn’t matter what’s on as soon as he sees an animal on the screen he goes running up to it. Sometimes he loses control and hits the tv causing it to make funny colours.

He especially likes it when I play grand theft auto 5 once in a while and I bring the rotweiler chop around town with me.

 

[Ricky Vapes]

Does anyone know what happens if you order something from FastTech that says either ships in 3 or ships in 5 business days? Do you get it eventually or does it just mean out of stock.

 

[Fidola13]

I got a new wheelchair that has some shiny parts. Does that count?

only if my shiny new cane counts too!

 

[Bigbob2322]

Chance always watches TV with us and swats at the TV if any rapid movement happens.

 

[ShowMeTwice]

Does anyone know what happens if you order something from FastTech that says either ships in 3 or ships in 5 business days? Do you get it eventually or does it just mean out of stock.

I've done that many times and just yesterday with a few items. You eventually get the item, at least I have. It may take a little longer. One time they wrote me back saying the item was discontinued and gave me a store credit.

 

[Pigs]

@classwife since I rebooted my router, 'puters and iPad yesterday I've had zero 502 errors. Before that I was getting them a lot. In the wacky world of networking sometimes simple solutions are the best.

For folks using smartphones and Tapatalk I would suggest doing a reboot.

For Android press and hold down the Power button for a few seconds. A menu will appear asking what action you would like to take. Tap the option that says Reboot/Restart.

For iPhone ... Restart your iPhone

You can also try clearing your browser cache on smartphones. Also try deleting the cookies for ECF.

More info: Getting a 502 Bad Gateway Error? Here's What to Do

Not sure why but I haven't been getting many bad gateway errors at all (maybe 1/fortnight). I'm in the habbit of re-booting my computers every time I walk away from them so maybe that's it.

 

[classwife]

@classwife since I rebooted my router, 'puters and iPad yesterday I've had zero 502 errors. Before that I was getting them a lot. In the wacky world of networking sometimes simple solutions are the best.

For folks using smartphones and Tapatalk I would suggest doing a reboot.

For Android press and hold down the Power button for a few seconds. A menu will appear asking what action you would like to take. Tap the option that says Reboot/Restart.

For iPhone ... Restart your iPhone

You can also try clearing your browser cache on smartphones. Also try deleting the cookies for ECF.

More info: Getting a 502 Bad Gateway Error? Here's What to Do

Not sure why but I haven't been getting many bad gateway errors at all (maybe 1/fortnight). I'm in the habbit of re-booting my computers every time I walk away from them so maybe that's it.

I've only seen one today - knock wood

 

[Eskie]

I got a new wheelchair that has some shiny parts. Does that count?

Hey, did you tape a vape caddy onto it yet?

 

[AngeNZ]

Sold out now at vapoureyes but 3f have them for US $44.99
Buy Authentic Hippovape Kudos 80W VW Iron Grey Squonk Box Mod

I got the last one vapoureyes had. Cheap price too, it was down to $51au or $35us. Shipping to NZ of course bumped it up to $44us. But I got some flavour concentrates as well.

3fvape have 5% off today code: xmas2019 - buy it!

 

[AngeNZ]

ohhhh...
At the bottom :
InTransit
Lastest Event --19-12-31 15:59--LOS ANGELES CA DISTRIBUTION CENTER--Departed USPS Regional Origin Facility

If there's one thing us Shiny members know how to do: it is TRACKING

 

[Don29palms]

Hey, did you tape a vape caddy onto it yet?

No but there is a big pocket on the back of the seat.

 

[AngeNZ]

Does anyone know what happens if you order something from FastTech that says either ships in 3 or ships in 5 business days? Do you get it eventually or does it just mean out of stock.

Unless it says 'ships in 7 business days' which is Chinese for discontinued, it will ship eventually. For multiple purchases in 1 order, you can check whats is holding up the shipment by clicking 'Details, options and support'.

 

[Ricky Vapes]

Thanks guys!

I dropped my recurve RDA and broke the cool drip tip it came with gonna try to find another. Doesn’t taste the same with another one

 

[AngeNZ]

Since I live in a self-contained tiny house, I have very little bench space. Today I had waaaaaaaaay less than normal to do a rewick marathon

 

[Don29palms]

Since I live in a self-contained tiny house, I have very little bench space. Today I had waaaaaaaaay less than normal to do a rewick marathon

View attachment 861085

She just wanted to help.

 

[DeloresRose]

Thanks guys!

I dropped my recurve RDA and broke the cool drip tip it came with gonna try to find another. Doesn’t taste the same with another one

I got some from fasttech.

 

[Don29palms]

Thanks guys!

I dropped my recurve RDA and broke the cool drip tip it came with gonna try to find another. Doesn’t taste the same with another one

https://www.fasttech.com/search?Recurve drip tip

 

[chanelvaps]

Well my first build of my supreme V2 didn't go too well. I obviously didn't use enough wick. It didn't leak exactly but it did flood the chamber.

I decided to go with the included post less deck and used a 3.5 Id single coil so that the wick would be nice and thick. I covered the wicking chambers pretty well but obviously not well enough. I do have the single coil deck but decided to go with the standard one after reading the comments from @TrollDragon. The post less deck is single coil really anyway. You could fit a dual set up in there but it would be very tight. Looks like I need to get the velocity deck.

I'll try again when I'm back at home again, I'll crack it with a bit more experimentation. I managed to get a few good pulls on it as it gradually flooded and the flavour and vape production was good if a bit airy. Closing down the juice flow control partially didn't help either.

Any ideas welcome.....??

did you stuff the wick down in the juice channels? I feel it has to be tucked in there pretty tight. Not folded over, but cut just the right length so that it tucks in and goes to the bottom of the juice channels. Looking under it the wicking should be peeking out.

 

[chanelvaps]

did you stuff the wick down in the juice channels? I feel it has to be tucked in there pretty tight. Not folded over, but cut just the right length so that it tucks in and goes to the bottom of the juice channels. Looking under it the wicking should be peeking out.

Also, I have everything closed off, juice control and air flow control, right side up to fill it, then turn it upside down and open everything, then turn it right side up