TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
I'd do the same, even with 3mm. I'm not too gung ho on single coils on that deck.
ETA: and I might be inclined to position closer to the AF.
Yes closer to the AF would be much better, I don't have the postless deck for the SV2 and don't know know how much room there is. I imagine dual 4mm or 4.5mm might be pushing it.
 

Daniel Forsyth

Vaping Master
ECF Veteran
  • Mar 26, 2019
    9,439
    57,112
    45
    Victoria, Australia
    I must have made a Lucky purchase!!
    I've just received a message back from fasttech,
    ''We checked your order just now and found all items are ready now. We will ship your order in 24 hours. A shipment notification will be sent to you with a tracking number inside.''
    So 1 Pretty Colossal Officially Ordered:wub:
    I'm Happy;)
     

    muth

    Ultra Member
    ECF Veteran
    May 20, 2014
    1,911
    7,845
    Boston, MA, USA
    I must have made a Lucky purchase!!
    I've just received a message back from fasttech,
    ''We checked your order just now and found all items are ready now. We will ship your order in 24 hours. A shipment notification will be sent to you with a tracking number inside.''
    So 1 Pretty Colossal Officially Ordered:wub:
    I'm Happy;)
    And you are so hyped that you actually typed out their message to show us! Yeah, I've done crazy things like that.
     
    • Like
    Reactions: DeloresRose

    Astron

    Ultra Member
    ECF Veteran
    Verified Member
    Apr 24, 2014
    1,405
    8,070
    Washington
    So I don't know if anyone's looking for one but the lustro 200w is on sale for certain colors for $25 with free shipping on the asmodus site. There are a few good colors but they're not like the black or stainless steel that a lot of people like there's like a robin's egg a couple different greens there's some pretty colors
    Thank you!
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Happy New Years Charlie!!! I have several aromizers inc the Supreme V2 with the velocity, postless and single coil decks I found on FT.
    Have you watched Daniels video of the tutorial or checked out the Steam Crave forum. There was another tutorial there I found helpful. It was REALLY helpful and I never had problems again. Daniel also mentions that if you use a single coil it should be AT LEAST a 4mm id using LOTS of cotton to stuff up those large juice wells.

    If you haven’t watched it it may save you a lot of headache especially since you’ll get all kinds of differing suggestions here. im not sure if this is the video I saw but maybe he’ll have some good ideas. Hope they help.

    For some reason I can’t find Daniels video. Maybe someone else can pop in with it.

    this is the video on the Steam Crave form
    Help out with some common issues of wicking process in Aromamizer RDTA V1/V2 and Supeme.
    Thank you Sara that's really helpful. I did watch a few videos but obviously they still didn't help. I used a 3.5 id coil. I'll have a look but the build will have to wait until I'm out of hospital in 4 weeks or so.

    I'll still be around on here though :)
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Using a single coil on the postless deck should really have a 4mm ID coil and lots of wicking. I'd build a dual 3.5mm to start with coils close to center 1 or 2mm off the deck and enough wick to fill the juice channel without packing it in. I only use Rayon in my RTAs and it is wicked totally different than cotton, Rayon needs to be very tight in the coil and 50% or more of the tails thinned.

    The postless deck is the absolute easiest deck to build and wick. I can do them on my Plus' in a few minutes, it takes longer to trim and thin the Rayon than it does to actually dry burn and rewick.

    Make sure the deck is fully seated in the lower section as well, the little tabs need to fit into the cutouts or the base won't fully seat and can cause leaking. Also turn the JFC to the locked position when filling or it will flood, just don't forget to open it again or the vape will be quite nasty after a half dozen hits. ;)

    This is a video on how to build and wick the Plus postless deck which is the same as the SV2 only bigger.


    If you want to find out how NOT to build a postless deck, this idiot does a bang up job. :lol::lol::lol:

    Thanks Charlie......I'll give it a try. Thanks for the video links too :)
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Yes closer to the AF would be much better, I don't have the postless deck for the SV2 and don't know know how much room there is. I imagine dual 4mm or 4.5mm might be pushing it.
    Dual anything is pushing it.....there really isn't much room :)
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    I'm pretty on the ball with these Slowtech people but I do have one question for the more experienced order makers??

    I purchased myself an Asmodus Colossal yesterday and when I made the purchase it said it was 'In Stock'.
    Which is what I wanted in stock! Colossal Ordered.
    I went back and had a look at the same product a few minutes later and it changed to 'Ships in 7 Days'.
    Would you know why this would be Letitia? Or any other Shiny Buyer's?
    I sent them an email to double check the stock status.
    It's a very special Shiny Colossal too so I'd rather it be shipped to me:p
    https://www.fasttech.com/product/9661954-golden-limited-authentic-asmodus-colossal-80w-tc
    The same thing happened to me with the VXV Vinci X 510 adapter. Was "shipped next day" when I ordered it (along with a whole bunch of stuff) and 4 days later it's in the "ships in 7 days" categorie. It's annoying because one small $6 item holds up the whole shipment.
    Are they overwhelmed with orders for certain items? Don't know Daniel but you're not alone! :-x

    EDIT: Just saw your good news post :thumbs:
     

    Daniel Forsyth

    Vaping Master
    ECF Veteran
  • Mar 26, 2019
    9,439
    57,112
    45
    Victoria, Australia
    The same thing happened to me with the VXV Vinci X 510 adapter. Was "shipped next day" when I ordered it (along with a whole bunch of stuff) and 4 days later it's in the "ships in 7 days" categorie. It's annoying because one small $6 item holds up the whole shipment.
    Are they overwhelmed with orders for certain items? Don't know Daniel but you're not alone! :-x

    EDIT: Just saw your good news post :thumbs:

    They said they would ship it by tomorrow afternoon, if not I'll cancel the order and it will be off to Asmodus to shop with the money I get back.
    Either way I'll be getting myself a Colossal, I've made an executive decision;)
     

    Users who are viewing this thread