Shinyitis Support Group

[Rob B.]

Thank you for posting bunny pictures here Ricky. I love them and miss them. Being in another thread makes them out of sight, out of mind. I am a pretty busy Realtor, and it's hard for me to find the time for the two threads I do participate in. I don't even go searching the forums for stuff to read. So far, everything I've needed exists on Shinyitis, and Picture of Your Setup Part 3. Glad you can slip in some photos of the bunny family once in awhile.

 

[Fredman1]

I decided to try something that i've been thinking of for some time...DL with a high ohm/high voltage (saw it from Jay Haze)
I used the new unused Pocket RDA that's been sitting around for some time.
Built a 3.0mm Kanthal flat wire coil (0.5×0.2) (thanks Ange) at 1.06ohm. Cranked the power up to 30W....5.7V
Man it works. I was expecting a lot of heat, but surprisingly it's not. More kick, throat hit and satisfaction. It even gives a new profile to my favourite juice. I like this.
Anybody vapes like this?

 

[Ricky Vapes]

Stevie is back home safe and dry

 

[Eskie]

More bunny photos please!!!!!

 

[Fidola13]

Hi everyone. Trying to catchup lol!!

Decided it was a nice day to vape the Avacado 22 on my new Gen. This Gen is a really nice mod. It’s a bit wider than I normally like but it feels fine to hold. I’m suppose to be receiving 2 more. One in black the other in blue/black. There coming from Sourcemore or Everzon so who knows when I’ll see them lol!

I almost forgot what a great flavor rba the Avacado is. The 22mm is more flavorful to me than the 24mm. I’m running it in single coil atm but will give dual coils next build.

 

[AngeNZ]

children? any of you (yeah right!) ordered from sourcemore or vaporl or 3fvape before? do they charge shipping? [like with CB they're cheaper sometimes than FT, but it isnt always worth it if they charge for shipping]

it all depends on what shipping you choose. 3fvape does epacket shipping for around $1 if your order is over $17(USD). Their epacket usually is 2 or 3 weeks.

Sourcemore charges $5 for epacket - 2 or 3 weeks

and with FT, always upgrade to epacket shipping - much quicker than registered post

 

[Ricky Vapes]

More bunny photos please!!!!!

Okay. Lol Stevie went on tour for a while but she hung close to my house now it’s snowing and she came back. She is inside my house now

Stevie in my driveway.

 

[AngeNZ]

I love the crackling sound (no pork jokes please) cause it usually signals a full, thick, tasty vape. A bit of crackling and popping doen't mean spitback - that's caused by not enough cotton. If you have too much cotton in the coil your flavour will be muted and start to get dry. I'm never happy with my wicking unless I hear some crackling.

I love crackling too, which is why I love the NarCa RDA so much - it's noisy as

 

[Ricky Vapes]

it all depends on what shipping you choose. 3fvape does epacket shipping for around $1 if your order is over $17(USD). Their epacket usually is 2 or 3 weeks.

Sourcemore charges $5 for epacket - 2 or 3 weeks

and with FT, always upgrade to epacket shipping - much quicker than registered post

For me Paying for the cheapest shipping at Source more always takes way longer than the free shipping option at FT .

Plus there is no way for me to track anything from sourcemore

 

[AngeNZ]

I decided to try something that i've been thinking of for some time...DL with a high ohm/high voltage (saw it from Jay Haze)
I used the new unused Pocket RDA that's been sitting around for some time.
Built a 3.0mm Kanthal flat wire coil (0.5×0.2) (thanks Ange) at 1.06ohm. Cranked the power up to 30W....5.7V
Man it works. I was expecting a lot of heat, but surprisingly it's not. More kick, throat hit and satisfaction. It even gives a new profile to my favourite juice. I like this.
Anybody vapes like this?

I do a 4 or 5 wrap with that wire in my rdas - on a fresh battery @ 0.7ohm it's 25 watts and is awesome. A cool vape, with tons of flavour and crackling But even down to 3.6V it is still an awesome vape.

I ordered another 2 reels of it today, along with more backup nic base for the freezer.

 

[AngeNZ]

Okay. Lol Stevie went on tour for a while but she hung close to my house now it’s snowing and she came back. She is inside my house now

View attachment 863097 View attachment 863099 View attachment 863101

Stevie in my driveway.

View attachment 863103

I'm so glad she finally let you collect her again, especially now she has a neutered Fluffy to play with

 

[Skunk!]

I bought the copper too, because I couldn’t pass up for that price. I have it on the unicorn mod - that came with a matching pink cap that fits the ardent RDAs, but I think it looks sweet with this copper.

I really like them and I’d like to have either unicorns or axial for each of the tube mods.

View attachment 862971

I agree on the Unicorn It is really easy to build on too. I picked up 2 besides the one that came with the kit lol.

Try swapping the barrel. Will probably look cool.

I love both the Unicorn and Axial. I use the Axials more simply because it works so well with single coils. The Unicorn RDA is one of my favorite dual coil RDAs of all time.

 

[the wind]

@virm here is some cotton https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=sr_1_15?crid=8NK9S5YZ14GB&keywords=cotton+pads&qid=1578872244&sprefix=cot,aps,147&sr=8-15 here is some wire. Stainless Steel 316L Round Wire

 

[Ricky Vapes]

I agree on the Unicorn It is really easy to build on too. I picked up 2 besides the one that came with the kit lol. View attachment 863129
Try swapping the barrel. Will probably look cool.
View attachment 863131 View attachment 863133
I love both the Unicorn and Axial. I use the Axials more simply because it works so well with single coils. The Unicorn RDA is one of my favorite dual coil RDAs of all time.

Where is everyone getting these unicorn rda’s at? I have one silver one and love it. Almost as much as the bonza

 

[Rob B.]

Where is everyone getting these unicorn rda’s at? I have one silver one and love it. Almost as much as the bonza

Pretty sure it's here.

 

[Skunk!]

Pretty sure it's here.

Bingo

 

[DeloresRose]

I agree on the Unicorn It is really easy to build on too. I picked up 2 besides the one that came with the kit lol. View attachment 863129
Try swapping the barrel. Will probably look cool.
View attachment 863131 View attachment 863133
I love both the Unicorn and Axial. I use the Axials more simply because it works so well with single coils. The Unicorn RDA is one of my favorite dual coil RDAs of all time.

Looks good! I got the colored caps and matching vert rings, that’s as creative as I managed to be lol.

 

[AngeNZ]

Since I was a good lil squirrel today and ordered more nic base for my stash. I made up for it by ordering a new travel coffee mug

AUTOSEAL® West Loop Insulated Stainless Steel Travel Mug | 20oz | Contigo®

 

[Fredman1]

Pretty sure it's here.

WoW thanks for the link. They are highly discounted to...I bought two....a unicorn and a axial. Shipping only $10 to NZ

 

[virm]

@the wind thanks for carrying the info over

A great RDA is the Asmodus .Blank, nice deep juice well and very easy to build.
One you should have a look at
$28.53 Authentic asMODus Blank RDA Rebuildable Dripping Atomizer - stainless steel / 24mm diameter / w/ BF pin at FastTech - Worldwide Free Shipping
And if you're going to get some RDAs you might just need a Luna as well
Ultroner x asMODus Luna Squonker Box Mod Single 18650 Cell 80W

there's running jyoke there i'm not in on.. but i have read you guys somewhere discussing there squonkers.
sheesh... singe 18650. how do you ppl work these? need more batteries than juice!

it all depends on what shipping you choose. 3fvape does epacket shipping for around $1 if your order is over $17(USD). Their epacket usually is 2 or 3 weeks.

Sourcemore charges $5 for epacket - 2 or 3 weeks

and with FT, always upgrade to epacket shipping - much quicker than registered post

wonderful thank you.
i never rush them. if i want things fast i order CB. only once i paid extra to rush batteries.. but that's coz otherwise nkon will. make. you. wait!

didn't answer my other quesitons though you gu-uh-uh-uyzz.. how tricky is it to prevent gear from leaking? i'm shiyining, feel like eati_ ehem_ getting another rta.. [oddly enough feeling like ordering a second elevate too]