Shinyitis Support Group

[AvaOrchid]

I ordered the Mach On3 deal from breazy, thank you for the link.

I did notice that it shipped from Tampa or at least mine did so it's coming from a different source but sold thru breazy. I did check out the third-party site and it seems to be pretty legit so I'm not overly concerned especially not for a $20 purchase. I just couldn't resist a dual battery squonk for that price...lol I hope you enjoy it I'll let you know if mine gets here first how it went it should be here tomorrow

 

[AvaOrchid]

I got a clone profile mesh rda and I really would like to try out the mesh thing with it the Clone doesn't come with that handy dandy jig does anyone have a suggestion on what to use I don't think that my other coil jig handle will be big enough but I'm sure I have something on hand LOL if anyone's use something else and might be able to spark my imagination that would be great

 

[Skunk!]

I loved the Project Sub-Ohm Mutation X, it was one of my first RDAs along with the CCI Militia (6 Hole version).

View attachment 863973

3 Post goodness...
View attachment 863975

Those are sweet The first 3 Mutation X were good attys. The 4 was when they went to the bottom amd side AF and every new model had that AF. I started looking and they have Doge V2s still on the congrevape site for $2.99 for a limited edition. Shipping was 8 bucks unless you buy $25 worth of stuff. I could think of better ways to spend the cash. It was my favorite and last of my 3 post attys.

I fit a triple core fc build in it. Barely. O rings are just about shot. I had this atty for about 5 years. Used it a lot for a long time.

My other one with the original screws. I put the grub screws in one so it would fit a chuff cap.

Sleeper coil. Don't know why I took it out...

 

[TrollDragon]

Sleeper coil. Don't know why I took it out...

Awesome!

Good times for sure with the old RDAs, I built quite a few 22ga sleepers as well. Great coil as it actually stayed in place while you worked on it.

 

[TrollDragon]

The three iconic churches in the harbor of Mahone Bay NS.
Just thought I'd share a little local scenery.

Pic courtesy of Acorn Art Photography.

 

[Skunk!]

Awesome!

Good times for sure with the old RDAs, I built quite a few 22ga sleepers as well. Great coil as it actually stayed in place while you worked on it.

I may pull out the claptons and attempt another sleeper coil later. I love how they heat up perfectly even.

 

[lupinehorror]

thanks to @Eskie i got an occula RDA and a rebirth RTA for under £28 from 3avape. some decent items on clearance.
enjoying a nightly play on the wireless currently which is set in my home city. realised i haven't watched regular television in over a year.

 

[charlie1465]

I’m so sorry. I can be such an insensitive clod sometimes, I swear...

I only pointed it out because of the part about vaping.

No, no no....it's not a problem honestly. Didn't effect my mood in the slightest. You post whatever you want to post

 

[virm]

evening folks
quick one today, gotta get to work_ have my biannual colloquium to prepare for (it's essentially our supervisor's way to examine our work) and i'm really unprepared.

prbbly won't recall with how much that goes on in here, i had ordered 4 packs of coils (20 coils total) for my very oldest tank, the oldest aspire cleito before i had ordered my first rta. it was on 70% or more sale, the last in stock at CB and i ordered the whole bunch figuring i knew how to avoid leaking now and it was just as good for flavour as my nunchaku 2 mesh and i liked it a lot and was curious to try it with the VW// mods i now have (i had only used it with the simple one-button internal battery K4 mod it comes with).

now that i have managed rta's, comfortable enough to take it out everywhere including workdays without fearing leakage.. stocks have essentially become redundant. and i have ordered nunchaku2 coils for stocking up when i found them on sale_ they're on the way. and i also have a stock of vprso coils for skrr [which i would gladly sell, if anyone knows a simple way to do that...]

the package has been stuck over a month at some post or another and i contacted CB and received the following reply:
'It has been a long time , could we refund you first > (sic)'
i assume the arrow is a typo for a question mark.

this is just to get feedback on the intended reply: you agree: say yes? dismiss the novelty of having coils for a tank i used to like?
does anyone have experience with refunds from CB; if they give you a return funds option or just a voucher, i mean?

it's difficult, preventing myself from getting my fix of all the previous posts today, but i really gotta work_ so don't have too much fun without me!

 

[virm]

Me too Virmy. I feel more like I do now than I did a few minutes ago

awwwwh... feel like i got company trapped in a cage in these crazy people's basement
they gots us good, hammie__ they really gots us good

 

[charlie1465]

Have you tried the dotmod RBA? I’ll have my AIO soon. I’ve got nautilus coils but hate to use them for that. If the dotshell is going to be hard to get I will certainly be interested unless it’s crap.

Yes I've got the rba. My problem is it's a tiny bit to restrictive for me and the shell is the cure.... I've sent a mail to Atmizoo asking when they're restocking.....I'm patient it's not a big deal really.

Thanks for thinking

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Fidola13]

I have vape mail from yesterday and today that I haven’t even opened because I have a cold and I’m miserable lol!

I barely leave the house with this busted hip so I don’t know how I caught cold germs!!

Some tea and soup and I’ll be back to post my goodies. I think most of my Flash Sale items have been delivered. Just a couple more I’m waiting on.

Then the Official Inventory takes place and culling for the Stash begins.

I hope I don’t go through the withdrawals when I’m not receiving vape mail every other day !!

 

[Astron]

Hey everyone...taking a “mental health day” lol. But I have my FUSH out for delivery and I don’t have the foggiest idea what to put on it. Most of my stockpiled RBAs are squonk-capable...so I have KRMA, Flave, and Profiles in black to choose from (I don’t want to order an RBA just for the FUSH). If I put a wire coil into a Profile (the mesh run ~.14 and too low for my comfort on a single 18650) do you reckon that would work ok?

ETA I also have a GR1 (?) from GasMods

 

[Fidola13]

I know I said I’m done but I may try to find another iJoy Zenith 3 a VV mod that takes 18650s and 20700s. It’s really a hard hitting and simple mod. They’re hard to find so if anyone runs across any. I think MVS has a them in rainbow.

Update: just found some at a “decent” price at some place called Vape King. Ordered the rainbow one. I’m surprised they had most of the colors in stock.

 

[DeloresRose]

I have vape mail from yesterday and today that I haven’t even opened because I have a cold and I’m miserable lol!

I barely leave the house with this busted hip so I don’t know how I caught cold germs!!

Some tea and soup and I’ll be back to post my goodies. I think most of my Flash Sale items have been delivered. Just a couple more I’m waiting on.

Then the Official Inventory takes place and culling for the Stash begins.

I hope I don’t go through the withdrawals when I’m not receiving vape mail every other day !!

Hope you feel better soon! I think we’re all going to feel a bit sad when there are no more shiny little packages to open.

 

[Letitia]

I got a clone profile mesh RDA and I really would like to try out the mesh thing with it the Clone doesn't come with that handy dandy jig does anyone have a suggestion on what to use I don't think that my other coil jig handle will be big enough but I'm sure I have something on hand LOL if anyone's use something else and might be able to spark my imagination that would be great

Might try a fat droppin coil or a dt.

 

[Fidola13]

Good morning Eskie. I agree with you 100%. This is the best community I've ever been a part of. I have other hobbies (LED Flashlights and computer tech), each with their own online communities. None compare to this. I have never seen the friendship, thoughtfulness, care, concern, compassion, devotion, enthusiasm, and love like this in any other community I've been a part of. I just want to live by all of you. I believe we all could have some of the best get togethers ever. In fact, any time y'all are in town, or if you're local, y'all have an open invitation to my house. It just amazes me how close you can feel to people you've never met in an online forum like this, but it's so. We share so much about our lives with each other, it's like I've known each of you forever. Fortunately, I've made some great local vaping friends also who are some of the best people ever. I don't know what it is about the vaping community, but it sure is pretty darn special. All I can say is, I sure am glad that I/we quit smoking and found life in this wonderful world of vaping.

I couldn’t agree more with you Rob! I feel the same way about the community here!

 

[Fidola13]

It's bummed me off to be honest. They'll restock I expect ​

Hey Charlie! How goes it today?

 

[Fredman1]

Paid 450 bucks to have him sedated and sheared. My mom took him the first time and he wouldn’t even let anybody get close to him after she dropped him off and they called us after he had been there for 3 hours to say they can’t muzzle him so they can’t give him the shot he needs to go to sleep. So I asked if I could go down and put it on myself since he can calm down with me so they said sire.

I left work to go down only to be told it’s been too long his appointment was 9 and it’s 1230 so we have to reschedule for the next day. I was so mad they had him there for 3 hours torturing him basically rather than calling us . They tried to sell me a couple trazadone for another 80 bucks just to give him in the morning before the appointment so they could muzzle him then Put him under anesthesia. I said no way I’ll bring him myself and go to work later.

The next day when I brought him he was good I held him then they gave him the shot. He growled a bit then passed out quick in my arms.

I’m gonna invest in some clippers and try to do him before he gets matted up so I don’t have to keep paying this much money each time

Damn what an ordeal for him (and you). Poor dog. He must've been puffed afterwards. They tire more with mental stress. Yeah it had to be done hey. He looks so much better now to. You'll just have to find a way to maintain him going forward.
Ah well good on you both
Every morning when I take my dogs for their walk, I think of you and your bunnies. Man this dogs just loves the wild rabbit droplets. It's like candy to them....(doggy M&Ms )
They are picky though...not to old, not to fresh. It must be just right