Shinyitis Support Group

[NolaMel]

View attachment 867691 I Like it with the white beauty ring. The white pei cap didn't fit. I still haven't gotten around to contacting them about it...

I probably need to pull all mine out and test fit them then. I need to see if the blue will match any of the Pulse doors. The purple is a ~{SMOKIN}~ match to the Topside!
They’re a breeze to deal with. First order got a wrong color cap. They sent me the correct one and said to keep the other. Hot pink isn’t really my vibe, so I’ll probably pif it if someone is hunting for one.

 

[NolaMel]

I did mine with needle nose and turned it. Worked for me

Mine won’t turn, so I’m guessing the nut is tight enough?

 

[Tralfaz]

Hey, they already generated a tracking number. If it actually enters the USPS system tonight I’ll be impressed and add them to my favorite juice vendors.

Yep, I got my "label created" notice too. If they get it to USPS in a timely fashion, I'll be placing a subsequent order as well. Ten bucks for Sadboy definitely has me interested.

 

[virm]

evening shiniyes

so [again] i've ordered the MD rta to be my MTL replacing the z coils

i've ordered two spools of wire
Kanthal A1, 28 AWG
KA1 fused clapton), 32*2/38 AWG

my favourite Zcoil was the 1.6ohm
flavourwise the zlide is much weaker than my older pod, but subtle as it was, it;s a terrific vape.

i am considering getting something flat instead of one these, say
0.1mm*0.5mm flat size $2.21 Authentic MKWS Kanthal A1 Ribbon Heating Wire - 0.1mm*0.5mm flat size / 30ft (10m) at FastTech - Free Shipping
there's a .4mm as well among the MKWS

i do have these already $1.23 Thunderhead Creations Kanthal A1 Pre-Coiled Wire for RBA (10-Pack) - 26 AWG / 0.4mm dia. / 0.8ohm at FastTech - Free Shipping
to which i think i can add wraps if i need the resistance a bit higher so i already have a round wire to try out on MD

what i don't know is whether
the fact that a wire is flat limits the amount of possible wraps?
getting flat for MTL makes a difference?
there's limitations on the coiler/jig (say: the CM4 vs the one i've asking abt: FastTech - Gadgets and Electronics

i am also wondering, if i don't get the flat if i should rather get a 30AWG isntead of the 28 or the clapton above

essentially dont' know what to get given the variables of number of possible wraps and possible ID...

also if the flats are diff to coil

cheerio

 

[Skunk!]

Mine won’t turn, so I’m guessing the nut is tight enough?

Should be. You already adjusted it?

 

[Skunk!]

what i don't know is whether
the fact that a wire is flat limits the amount of possible wraps?

Nope.

 

[Fidola13]

Good afternoon everyone! I think I’ve received all my orders from the flash sale altho one order had to be shipped somewhere else before coming here.

I think it really sucks that so many vendors won’t even sell hardware to customers from flavored vape juice ban states!! I’ve even emailed some of them saying they’re losing a lot of money and other vendors are able to separate the juice from the hardware. Oh well. It just doesn’t make very good business either.

 

[NolaMel]

Should be. You already adjusted it?

I tried to lol. It was tight. I’ll try to adjust the 510 another time. I’m digging my Axial on it atm

 

[Skunk!]

I tried to lol. It was tight. I’ll try to adjust the 510 another time. I’m digging my Axial on it atm

Try that atty on a different one and keep the axial on that one.

 

[Ricky Vapes]

The usual suspects in quantity - Ridin' Shotgun and Sin Tax. I also grabbed some Black Market which I haven't been able to find cheap like this yet. It's the chocolate version of Ridin' Shotgun so I'm pretty sure I'll like it. Got some Speakeasy too, which is great but you have to really like root beer. The first two are my must haves, though. Shipping was standard USPS Priority for $7.49.

I went to order two bottles and it was 20 bucks for cheapest shipping!

 

[Tralfaz]

I went to order two bottles and it was 20 bucks for cheapest shipping!

I'd imagine the shipping is less for US customers.

 

[Ricky Vapes]

I's imagine the shipping is less for US customers.

Yea I’ve never had a US vendor charge me that much. By the time it’s converted to Canadian I won’t be paying much less than ordering from a Canadian vendor.

Although around here to buy a 60ml bottle in a shop tills cost you 38 bucks a bottle.

 

[Tralfaz]

I forgot about the other shiny news I had. I've been meaning to pick up one of Coilturd's An RDA For Vaping RDAs for a while but never got around to it. He did some custom caps with Palmer's Powders recently and put ten of the candy red version up for sale last night on his site.

I managed to snag one. Pretty sweet.

 

[Skunk!]

I forgot about the other shiny news I had. I've been meaning to pick up one of Coilturd's An RDA For Vaping RDAs for a while but never got around to it. He did some custom caps with Palmer's Powders recently and put ten of the candy red version up for sale last night on his site.

I managed to snag one. Pretty sweet.

Awesome! That's gorgeous! I've heard a lot good things about that atty.

 

[Tralfaz]

Awesome! That's gorgeous! I've heard a lot good things about that atty.

Yeah, I'm really looking forward to it. The airflow is similar in design to the Asgard Mini I just got and the flavor on that one is ridiculously good.

 

[Don29palms]

I forgot about the other shiny news I had. I've been meaning to pick up one of Coilturd's An RDA For Vaping RDAs for a while but never got around to it. He did some custom caps with Palmer's Powders recently and put ten of the candy red version up for sale last night on his site.

I managed to snag one. Pretty sweet.

We definitely need a review after you get it please.

 

[Tralfaz]

Will do

 

[Fredman1]

I mailed 3F about the Boost RBA that hasn't been shipped yet. This is the response.

 

[Pigs]

Probably better since it sat for a while honestly.

Not this time. 18 months on the shelf.

 

[Daniel Forsyth]

Good Morning Shiny People