Shinyitis Support Group

[jfcooley]

I’m actually using a 2.0mm coil...or as close to it as I can get...I’m using a 5/64” drill bit, and I think it’s about 0.006” off from 2.0mm!

Anywho...it’s tiny.

I’m using 29g Kanthal. Like 8 wraps.

You gotta be gentle when wicking the coil as well...29g deforms easily.

I had opted to go with 28g which is easier to wick, but the thicker wire has a longer ramp up time, and a longer residual heat factor, which gunks up coils too fast for something like this.

I like two-wire twisted 28g coils in my BBox atomizers and 22mm Calix atties, for DL or restricted DL builds.

I really wanted something to replace my pod mods, since those are being given the axe first...thanks to the FDA’s campaign to “save the children”...*cough*StealTaxMoney*cough*




The tank looks extremely stock to me.

I have taken a tank apart...the one that came with my DotAIO RBA deck.

If you’re very careful, you can do it.

Might be hard to do/frustrating with the black/smoked tank because the color of the material would be hard to differentiate the little tabs.

But in short, the tanks can be disassembled, and the DotShell is using a stock tank.

Thank you.

I think with all my small electronics tools I have a tool that will seperate the tabs safely.

I can wrap a 2 to 3 id coil. Just have to dig up what wire I have.

 

[Bigbob2322]

Getting some alerts from @charlie1465 , we missed you buddy.

 

[Daniel Forsyth]

Yes! Seconding that Delores and Virm.
Just woke up to Charlie alerts. So good to see him back.

G'day @charlie1465 !

I woke up to Charlie alerts and Lots of em'!!
It put a Big smile on my face

@charlie1465 is not far away now, I can feel the Love

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Ricky Vapes]

Morning all

Suns out didn’t think I’d ever see it again . Been getting soaked in just pouring rain constantly for well over a month now. Had a little break last weekend but that’s it.

Sassy and bugs are playing

Toby on the farm looking majestic

 

[SKYYcamel]

Can someone tell me how much 100mg nic to add to a store bought 3mg juice to bring it up to 9mg? The juice I want to change is in a 100ml bottle Thanks!

 

[charlie1465]

Yes I'm back....have been catching up on 450 old posts...jeez I've been working on that for around 3 hour's so....

Good evening shinies

Sorry I've been quiet but been fighting 40 degree fevers again which eventually resulted in a rinsing of my lungs which although wasn't terribly pleasant it was tolerable. I had a very good team and doctor and they kept me calm.

To many of you to name but thanks for all the love out there....you guys are the best

@chanelvaps so happy to hear you are through your op and really hoping you won't notice any difference in lung function when things have settled down....you probably won't. Have been thinking about you daily and sending loads of love and hugs to you. Good luck with your tests

 

[Letitia]

Can someone tell me how much 100mg nic to add to a store bought 3mg juice to bring it up to 9mg? The juice I want to change is in a 100ml bottle Thanks!

6mls

 

[charlie1465]

Can someone tell me how much 100mg nic to add to a store bought 3mg juice to bring it up to 9mg? The juice I want to change is in a 100ml bottle Thanks!

Try using e-liquide calc for Android. It has a quick start section to do exactly that. Target strength plus base one and base b.

If you have trouble let me know and I'll do it for you

 

[SKYYcamel]

Try using e-liquide calc for Android. It has a quick start section to do exactly that. Target strength plus base one and base b.

If you have trouble let me know and I'll do it for you

I don’t have any android devices I’m afraid. Thanks for your help!

 

[englishmick]

6mls

I was about to say that but in the time it took me to type 6mls you got your post in. Damn, you have to fast around here.

And since that would change the final volume to 106mls you would actually need 6.36mls. But that would change the final volume from 106mls to 106.36mls. Etc. And neither my brain or my mixing spreadsheet have enough decimal points to go there.

If it was me I would go with 6mls.

 

[Tralfaz]

Yes I'm back....have been catching up on 450 old posts...jeez I've been working on that for around 3 hour's so....

Good evening shinies

Sorry I've been quiet but been fighting 40 degree fevers again which eventually resulted in a rinsing of my lungs which although wasn't terribly pleasant it was tolerable. I had a very good team and doctor and they kept me calm.

To many of you to name but thanks for all the love out there....you guys are the best

@chanelvaps so happy to hear you are through your op and really hoping you won't notice any difference in lung function when things have settled down....you probably won't. Have been thinking about you daily and sending loads of love and hugs to you. Good luck with your tests

<3

 

[englishmick]

Try using e-liquide calc for Android. It has a quick start section to do exactly that. Target strength plus base one and base b.

If you have trouble let me know and I'll do it for you

Glad to see you back mate.

 

[YePsTeR]

That song is on my playlist

 

[lupinehorror]

just, because...

 

[Fredman1]

Welcome back @charlie1465
You were missed buddy.

 

[Rob B.]

So glad to see you Charlie. Worried about you bud.

 

[Fredman1]

Still giggling about Rob liking Ricky's shiny long thingy more than Pigs's....but Pigs's one is nice to.

 

[jfcooley]

Still giggling about Rob liking Ricky's shiny long thingy more than Pigs's....but Pigs's one is nice to.

Thinking it's best not to touch that.

 

[Letitia]

Thinking it's best not to touch that.

Sure is hard not to huh?