Shinyitis Support Group

[Fidola13]

Good morning shinies

Good night Forsyth......may all our nights and days be the best

I hope you’re doing well Charlie and I apologize for not checking in “more” often to see how you’re doing.

I pray to any gods and/or goddesses/ creator that you are well !

 

[Blitzdonlife]

I know exactly what you mean. I hate throwing the old bottles away and kept them all in a bag for when I was ready to spend the day at the kitchen sink.
Half hour later I thought sod this, too much faffing about. The first few labels came off clean but then the rest I was pulling my hair out.
In my anger I threw the lot in the bin.
Easier to just buy new bottles which is a shame as I wanted to do my bit for the environment.

I had this problem before. What I did was to soak them in the sink with some vinegar/dish soap in warm water for an hour. Any stuck glue that's left over cleans up with Isopropyl alcohol pretty easily.

 

[Blitzdonlife]

I hear ya. I don’t know what happened to me. I was in mixers paradise with a setup and over 200 flavors and 7 liters of nic.

Then one of my dogs died and a week later I fractured my hip and was really bed ridden for several months except for PT and using a walker. Sitting in a chair - any chair- was extremely painful and had to be a certain height blah blah blah And I’ve had complications.

Bottom line is there’s no reason now that I can’t sit to mix 1-3 juiced myself but I’ve gotten so darn lazy just reaching for a commercial juice. Such a waste of money. It was supposed to be for my “stash”

so somehow I need to motivate myself especially since I enjoyed it so much as a hobby and even set up a mix station and don’t need to put stuff away except flavors in a dark closet.

soooooooo any ideas to get me from making really lame excuses please send them my way lol!!

seriously

What did you enjoy the most about mixing when you first started to really have fun with it? Go back to the beginning to find your passion again. Or something like that

 

[Zazie]

Still no sign of @Eskie. I don't like that at all.

 

[Fidola13]

What did you enjoy the most about mixing when you first started to really have fun with it? Go back to the beginning to find your passion again. Or something like that

What I great idea!! Thanks!

 

[Fidola13]

What I great idea!! Thanks!

One of the things I enjoyed the most was a sense of accomplishment! It’s been a long time feeling that way when you have a chronic illness so it became that as well as a hobby I could physically do (most of time)! I also felt part of the Random Mixers thread even though I rarely came up with my own recipes - why reinvent the wheel for my basic tastebuds.

It felt great to be part of a group of like minded people who loved their hobbies, creativity and saving money of course lol!

When you’re stuck at home day after day it’s rare that you feel that sense of comradeship- to be a part of.

I think those are the top reasons. I know you didn’t mean for me to list them out but it was somewhat carthetic to type them and see them.

thanks Rob. I think I’ll cancel next week’s therapy session & just talk with you. Well have to pay with Vape trading though lol!!

 

[Blitzdonlife]

One of the things I enjoyed the most was a sense of accomplishment! It’s been a long time feeling that way when you have a chronic illness so it became that as well as a hobby I could physically do (most of time)! I also felt part of the Random Mixers thread even though I rarely came up with my own recipes - why reinvent the wheel for my basic tastebuds.

It felt great to be part of a group of like minded people who loved their hobbies, creativity and saving money of course lol!

When you’re stuck at home day after day it’s rare that you feel that sense of comradeship- to be a part of.

I think those are the top reasons. I know you didn’t mean for me to list them out but it was somewhat carthetic to type them and see them.

thanks Rob. I think I’ll cancel next week’s therapy session & just talk with you. Well have to pay with Vape trading though lol!!

The Random thread is still going, friendly folks. Stop in say hello if you feel like it

 

[ShowMeTwice]

Not yet Mate!
I only found out that the Klean existed a couple of days ago and I come across the Klone only about a week ago, so there both pretty new additions to my list that now need to be crossed off. And I'll find em'

Can I tempt you to sell your Klone?

Here ya go... Asmodus Klone v2 (black and red) in-stock.
Asmodus KLONE mod - Authentic

They also have the Asmodus Woody in-stock. I don't recall if you have a one or not.
asMODus Woody

There is a used Asmodus Klean for sale here.
https://www.letgo.com/en-us/i/asmod...loud-rda_1a9a330a-3242-443d-9b09-0430de7b51c3

 

[AngeNZ]

Morning shinies

If you have princesses taste buds I think mines are commoners they prefer (so far) menthol ejuice, they don't mind certain fruits but overall they love menthol .

I'm glad I didn't have to chase the tobacco taste because long time ago I switched to menthol ones

I was a menthol smoker too, so I also went for menthol/mint ejuice. Most were OK, but it wasn't until I found these guys:
Mist NZ Vape Store
that I found something I absolutely love vaping. And I know that played a huge part in keeping me smoke-free. Their juices aren't overly flavoured or too strong and they are a fantastic ejuice store.

They used to offer a custom made 50ml, where you pick 3 of their juices and they mix them together. I tried Menthol, Vanilla Ice Cream and Whipped Cream. The result ended up being my favourite ejuice for the next year. I only stopped buying from them when I successfully cloned it - and even now, that mix is my morning wake-up juice
The recipe is Enticemint:
AngeNZ's blog | E-Cigarette Forum

 

[ShowMeTwice]

I believe @ShowMeTwice might have both, @AngeNZ has the doggystyle I think not sure if she has the dvarw

I have a few SJMY 2k16 Doggy's and Dvarw's (older and FL). 2k16's are a fine airy MTL (2.5mm AF). You can tighten down the AF ring. Also have the B-a-s-t-a-r-d RTA which is nearly as airy as a 2k16. It has topfill while the 2k16 is bottom fill. It's Animodz latest RTA (they made the Doggies). The B-tard is just as easy to build on as the 2k16's (virtually the same deck). Both will take a 2.5mm ID coil. AF on the Dvarw's can be made the same as a Doggy/B-tard with optional AF inserts.

@Redbird11, of the three, if I was looking for an RTA for flavor I would go with the updated Dvarw MTL FL. The updates alone make it worth it. I have a real Dvarw MTL FL and bought some of the AF inserts (for a more open MTL and RDL). Still running mine w/the 1.2mm insert. They did a great job updating the Dvarw with the FL. If looking at the older ones the Coppervape Dvarw MTL is quality.

For flavor, the Dvarw's (older or FL) are very tough to beat. Doggies are easy to build on etc and produce very good flavor but are not in the same league flavor wise as a Dvarw (nor a Kayfun/Tripod/Pocket/Project X) IMO. But I still love and use the 2k16's and B-tard.

FT lists a Dvarw MTL FL with all the AF inserts. I wouldn't be too concerned about a lack of reviews as FT only recently listed the FL's. Doubt anyone has theirs yet. FWIW SXK and YFTK are usually always 1:1. I would lean towards either of those. Coppervape and YFTK made solid older Dvarw MTL/DL clones. If you are looking for a proper MTL you will need the 0.8mm AF insert. Dvarw MTL default is 1.2mm.

Good luck

 

[Daniel Forsyth]

I almost asked @Daniel Forsyth yesterday if he has an alert set up to tell him when @charlie1465 says good night so that he knows when to wish us good morning.

Our watches are synchronised

 

[charlie1465]

Night, night guys and I'll see you in the morning

@Fidola13 thanks sweetie I'm doing ok thanks. Hope you are too.

 

[Fidola13]

Night, night guys and I'll see you in the morning

@Fidola13 thanks sweetie I'm doing ok thanks. Hope you are too.

considering what’s happening in the world I’ll refrain from complaining. Too much lol!!!

 

[Fidola13]

The Random thread is still going, friendly folks. Stop in say hello if you feel like it

oh I will for sure. Maybe it’ll light the fire under my ....!! A great group of people in that thread!

 

[Daniel Forsyth]

Have you managed to locate an original Ohmsmium yet?

Not just yet

someone will come to there senses and sell me there one soon enough though

 

[Resistance]

Greetings shiners. Have a good night @charlie1465

 

[Resistance]

Not just yet

someone will come to there senses and sell me there one soon enough though

And the woody?

 

[Daniel Forsyth]

Here ya go... Asmodus Klone v2 (black and red) in-stock.
Asmodus KLONE mod - Authentic

They also have the Asmodus Woody in-stock. I don't recall if you have a one or not.
asMODus Woody
View attachment 896829

There is a used Asmodus Klean for sale here.
https://www.letgo.com/en-us/i/asmod...loud-rda_1a9a330a-3242-443d-9b09-0430de7b51c3

Your a Shiny Champion SMT, all bookmarked

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Daniel Forsyth]

Here ya go... Asmodus Klone v2 (black and red) in-stock.
Asmodus KLONE mod - Authentic

They also have the Asmodus Woody in-stock. I don't recall if you have a one or not.
asMODus Woody
View attachment 896829

There is a used Asmodus Klean for sale here.
https://www.letgo.com/en-us/i/asmod...loud-rda_1a9a330a-3242-443d-9b09-0430de7b51c3

Do you know much about the vape store Test Vapor store Webpage.. where the Klone and the Woody are advertised for sale Mate?
Or anyone else for that matter