Shinyitis Support Group

[ShowMeTwice]

Good morning Everyone

 

[the wind]

Beurre du Bretagne doux (unsalted)

I'll have to import that,to long of a name to be sold in the us.

 

[ShowMeTwice]

I'll have to import that,to long of a name to be sold in the us.

I would not even try to ask for "Beurre du Bretagne doux" in any stores near me. If I did they would probably direct me to the women's products isle.

 

[AngeNZ]

Morning shinies

Hey you Dvarw army types - anybody know if there's a glass that'll fit the Dvarw DL?

Hadn't had any issues with my plastic tanks until I rinsed out my new 6ml tube in very warm water. Hair line cracks all over. Also I just prefer glass to plastic if there's an option.

The only problem I had using the sxk DL fl replacement glass was the seals on the DL wouldn't fit with it. So try it with the seals from your DL FL. And let me know, as I want to switch my 3 DLs to glass too.

With the DL seals - which of course are for thinner width PC/PEI tank tubes, any glass tube 25mm*20mm height should fit. However you do end up with 0.5mm glass overhang. I've got these and they fit the DL, with the overhang:
$2.17 Iwodevape Replacement Glass Tank for IJOY Avenger (3-Pack) 3-pack - 3.2ml at FastTech - Free Shipping

What we really need is 24mm glass seals like the Dvarw DL FL has. I've got these
$1.46 Authentic Vapesoon Seal Rings Set for Horizon Tech Falcon Tank (2-Pack) 2-pack - 3pcs/pack at FastTech - Free Shipping
in a cart to try, as the tank they are for uses 24mm glass.
and if you want cheaper replacement glass than the SXK option:
$3.72 Authentic Clrane Replacement Glass Tank for CoilART MAGE RTA Atomizer (5-Pack) 5-pack at FastTech - Free Shipping

KHW Mods do sell those O-rings too, but their shipping downunder is pricey:
Silicone ring for 24mm glass tanks transparent 2pcs – KHW mods

Edited to add: Yup, I'm a geek

 

[ShowMeTwice]

I was reading a book the other day and it said you should never start the day with coffee before breakfast as so many of us do

I always start with my breakfast first. Then coffee.
Ha, I'm doing something right!

 

[Resistance]

You know, it would be pretty easy to add Rose's lime juice to that frigid vodka.

The Roses passion fruit is also great.

 

[Resistance]

Greetings Shiny Folk!

 

[Resistance]

@charlie1465 Awesome news!

 

[the wind]

Edited to add: Yup, I'm a geek

a loveable geek that goes out of her way for a fellow shinyter.

 

[Resistance]

Ordered a battery charger. Went for the Efest Luc v4 Elite HD. Also got Vandy Vape Superfine MTL Clapton Prebuilt Coil 30GA+38GA 10Pack (KA1). The resistance is through the frickin roof at 2.1ohms, so they are for reg. mods only

That superfine works good with a 2mm i∅.wiking can be done with a needle threader. makes it a little easier.

 

[Pigs]

I always start with my breakfast first. Then coffee.
Ha, I'm doing something right!

Me too. Never coffee first

 

[Letitia]

For me it is always caffeine before food; more of a brunch type rather than breakfast.

 

[Resistance]

I drink tea

No milk.

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Aerodan]

Atty holder, ala Home Depot

• Aerodan
• Nov 11, 2020

Three planks, thanks.

I feel a bit of a kinship in this thread, so hope it's cool to post this here. As the atty collection gets far out of hand, I tried my hand at walnut wood "working". It's just a couple of Home Depot planks and 510 CCEll adapters, but it works! Have a great Veterans Day folks.
AD

 

[Fredman1]

Yay, we have a vaping law in NZ.

New vaping rules come into effect today

 

[Pigs]

Morning shinies



The only problem I had using the sxk DL fl replacement glass was the seals on the DL wouldn't fit with it. So try it with the seals from your DL FL. And let me know, as I want to switch my 3 DLs to glass too.

With the DL seals - which of course are for thinner width PC/PEI tank tubes, any glass tube 25mm*20mm height should fit. However you do end up with 0.5mm glass overhang. I've got these and they fit the DL, with the overhang:
$2.17 Iwodevape Replacement Glass Tank for IJOY Avenger (3-Pack) 3-pack - 3.2ml at FastTech - Free Shipping

What we really need is 24mm glass seals like the Dvarw DL FL has. I've got these
$1.46 Authentic Vapesoon Seal Rings Set for Horizon Tech Falcon Tank (2-Pack) 2-pack - 3pcs/pack at FastTech - Free Shipping
in a cart to try, as the tank they are for uses 24mm glass.
and if you want cheaper replacement glass than the SXK option:
$3.72 Authentic Clrane Replacement Glass Tank for CoilART MAGE RTA Atomizer (5-Pack) 5-pack at FastTech - Free Shipping

KHW Mods do sell those O-rings too, but their shipping downunder is pricey:
Silicone ring for 24mm glass tanks transparent 2pcs – KHW mods

Edited to add: Yup, I'm a geek

An awesome geek.

I just tried the DL FL seals on the DL but unfortunately they are too big - don't quite fit

 

[NolaMel]

For me it is always caffeine before food; more of a brunch type rather than breakfast.

No caffeine = no go here! I wake up to a cup waiting on my bedside table every morning. Smart (good survival skills) hubby

 

[Fidola13]

Morning shinies



The only problem I had using the sxk DL fl replacement glass was the seals on the DL wouldn't fit with it. So try it with the seals from your DL FL. And let me know, as I want to switch my 3 DLs to glass too.

With the DL seals - which of course are for thinner width PC/PEI tank tubes, any glass tube 25mm*20mm height should fit. However you do end up with 0.5mm glass overhang. I've got these and they fit the DL, with the overhang:
$2.17 Iwodevape Replacement Glass Tank for IJOY Avenger (3-Pack) 3-pack - 3.2ml at FastTech - Free Shipping

What we really need is 24mm glass seals like the Dvarw DL FL has. I've got these
$1.46 Authentic Vapesoon Seal Rings Set for Horizon Tech Falcon Tank (2-Pack) 2-pack - 3pcs/pack at FastTech - Free Shipping
in a cart to try, as the tank they are for uses 24mm glass.
and if you want cheaper replacement glass than the SXK option:
$3.72 Authentic Clrane Replacement Glass Tank for CoilART MAGE RTA Atomizer (5-Pack) 5-pack at FastTech - Free Shipping

KHW Mods do sell those O-rings too, but their shipping downunder is pricey:
Silicone ring for 24mm glass tanks transparent 2pcs – KHW mods

Edited to add: Yup, I'm a geek

I’ve been getting most of my replacement glass from this company and they appear top notch

GeekVape Zeus 25mm Single Coil RTA Replacement Glass Tube (3PCS) [GT0162x3]$5.99

 

[Aliraonz]

Good morning shiny ones