Greetings Shiny Folk! May the last day of the year be exceptionally good.
What's happening with PayPal and fasttech?
I've just made a fasttech purchase using PayPal, no gift card
it's all e-cig stuff too!!
I bought a bunch of drip tips(that weren't needed
) and Big Brunhilde's Boyfriend, Siegfried the Meshed Up rta and Mech $88.99 Authentic Vapefly Siegfried Tube Mod + Siegfried Mesh RTA Kit - 7ml (25*22mm (OD*ID)) / stainless steel / 1*21700/18650/20700 at FastTech - Free Shipping
I've just made a fasttech purchase using PayPal, no gift card
it's all e-cig stuff too!!I bought a bunch of drip tips(that weren't needed
) and Big Brunhilde's Boyfriend, Siegfried the Meshed Up rta and Mech $88.99 Authentic Vapefly Siegfried Tube Mod + Siegfried Mesh RTA Kit - 7ml (25*22mm (OD*ID)) / stainless steel / 1*21700/18650/20700 at FastTech - Free Shipping
More on the SXK Kayfun 5 Squared SE clone:
Here's the box I mentioned. Maybe the type of clone some dodgy B&M retailers would pass off as an authentic. (No I haven't tried the QR code!)
Because of the design of the deck and post screw position the coil wants to be really close to the AF. I'm running it in the most open mode (4 mm AF) but it's still more restricted than the Dvarw DL with the 3.5mm AF insert. That's with an 810 DT on the KF and a 510 on the Dvarw. I put it down to the low coil position and the narrow chimney on the KF. I don't have calipers so can't give you an accurate chimney diameter. This build is 3mm ID. I'll try 2.5mm next to maybe get a little more air.
If the post screws were offset you could fit bigger coils but I'm not sure the atty wants them. Definitely a restricted DL vape. The 810 DT is deceptive - this is not a big airy cloud chucker.
The wicking and juice flow took me a while to sort out and will take me a while longer to find the sweet spot. The Dvarw DL is such a simple, bullet proof design so I've got lazy. Nice to have a bit of a challenge again.
The flavour is excellent and I love the 7 ml juice capacity.
The machining is as good as any clone I've seen.
I've only had it for half a day so these are early impressions. I get the feeling this RTA will take a while to get the best out of. So far so good and for $14.95 I'd recommend it for sure.
$14.95 SXK KF 5² Square SE Styled RTA Rebuildable Tank Atomizer - 7ml (25*22.5mm(OD*ID)) / 316 stainless steel + PSU / 25mm diameter at FastTech - Free Shipping
It's a tall tank (62.5mm without DT) so perfect for an SBS that fits 25mm diameter attys. (@AngeNZ I tried it on the Mixx with the tank guard on and you were right - too tight)
Here's the box I mentioned. Maybe the type of clone some dodgy B&M retailers would pass off as an authentic. (No I haven't tried the QR code!)
Because of the design of the deck and post screw position the coil wants to be really close to the AF. I'm running it in the most open mode (4 mm AF) but it's still more restricted than the Dvarw DL with the 3.5mm AF insert. That's with an 810 DT on the KF and a 510 on the Dvarw. I put it down to the low coil position and the narrow chimney on the KF. I don't have calipers so can't give you an accurate chimney diameter. This build is 3mm ID. I'll try 2.5mm next to maybe get a little more air.
If the post screws were offset you could fit bigger coils but I'm not sure the atty wants them. Definitely a restricted DL vape. The 810 DT is deceptive - this is not a big airy cloud chucker.
The wicking and juice flow took me a while to sort out and will take me a while longer to find the sweet spot. The Dvarw DL is such a simple, bullet proof design so I've got lazy. Nice to have a bit of a challenge again.
The flavour is excellent and I love the 7 ml juice capacity.
The machining is as good as any clone I've seen.
I've only had it for half a day so these are early impressions. I get the feeling this RTA will take a while to get the best out of. So far so good and for $14.95 I'd recommend it for sure.
$14.95 SXK KF 5² Square SE Styled RTA Rebuildable Tank Atomizer - 7ml (25*22.5mm(OD*ID)) / 316 stainless steel + PSU / 25mm diameter at FastTech - Free Shipping
It's a tall tank (62.5mm without DT) so perfect for an SBS that fits 25mm diameter attys. (@AngeNZ I tried it on the Mixx with the tank guard on and you were right - too tight)
Last edited:
Yep, less than 1hour to go! Happy New Year too Big Brothers Australian @Pigs and to @Daniel Forsyth , and @ShowMeTwice in the USA
,I want a GS dog, ,,,something yo said SMT, ANDto my Kiwi mates @AngeNZ ,@Aliraonz and @Fredman1 . @charlie1465, in France, Kia Kaha (Be Strong)@chanelvaps , KIA KAHEA, (be Strong)know you are I Say with genuine sincerity. hope you ok.I DID read re the slice of lung!
s
Happy New Year folks where ever you may br, its 2300hrs here.,
love to @nola MEL. Too
Last edited:
I just read(ok. Browsed through) an article about this in Ecigssa. About PayPal trying to screw with vaping. Let me check if I can link you.What's happening with PayPal and Fasttech?
I've just made a Fasttech purchase using PayPal, no gift card
I bought a bunch of drip tips(that weren't needed
2020: Part 4
Quote"Finally, PayPal decided to contract the Facebook jitters [link]. Despite telling people that it wasn’t a problem, and it wasn’t trying to close the accounts of vape businesses, PayPal proceeded to close all vape business accounts over a two-week period. Moreover, it also closed some accounts of consumers it suspected may have sold a mod second-hand or once been a business owner. A trade body responded with advice [link]."
Quote"Finally, PayPal decided to contract the Facebook jitters [link]. Despite telling people that it wasn’t a problem, and it wasn’t trying to close the accounts of vape businesses, PayPal proceeded to close all vape business accounts over a two-week period. Moreover, it also closed some accounts of consumers it suspected may have sold a mod second-hand or once been a business owner. A trade body responded with advice [link]."
Last edited:
Going to venture into white chocolate.
Ange,my first hearing of wc was from you.do you have a brand?
@Letitia flavor expert are you out there?
Ange,my first hearing of wc was from you.do you have a brand?
@Letitia flavor expert are you out there?
Happy new year all!
Heres hoping 2021 doesnt come in chuckling and tell 2020 to hold my beer!
Heres hoping 2021 doesnt come in chuckling and tell 2020 to hold my beer!
Happy new year! Just lunch time NYE here. Planning on a quiet night in. But, I will raise a glass and toast to you all at the stroke of midnight. May your new year be better than the last, and may health, happiness and prosperity be abundant. And thank you for being here, and being who y’all are. <HUGS>Yep, less than 1hour to go! Happy New Year too Big Brothers Australian @Pigs and to @Daniel Forsyth , and @ShowMeTwice in the USA
@chanelvaps , KIA KAHEA, (be Strong)know you are I Say with genuine sincerity. hope you ok.I DID read re the slice of lung!
s
Happy New Year folks where ever you may br, its 2300hrs here.,
love to @nola MEL. Too
A lot of people swear by VTA + FLV. I like VTA love plus another white chocolate to round it outGoing to venture into white chocolate.
Ange,my first hearing of wc was from you.do you have a brand?
@Letitia flavor expert are you out there?
The Pacific island nations of Tonga, Samoa and Kiribati/Christmas Island were the first places in the world to welcome 2021.
Then NZ and OZ.
The last place which will welcome the New Year will be Baker Island and Howland Island, two unoccupied US Islands in the Pacific – but the last occupied territory to celebrate January 1 will be American Samoa (11AM GMT).
Morning shinies
I hope this year is better for everyone
I hope this year is better for everyone
Thank you, you are a
ing superstar Going to venture into white chocolate.
Ange,my first hearing of wc was from you.do you have a brand?
@Letitia flavor expert are you out there?
I've only tried Flavour West White chocolate so far. I absolutely love it, as it's sweet, creamy with no off tastes. I use it at 1-3% in a mix, and have been chucking it in nearly all my recipes
Happy New Year to you Boudica down in the land of the long white cloud.and @ShowMeTwice in the USA
Noho me ka hau’oli (Hawaiian for be happy).
Good afternoon Folks !!!
Happy New Year to All.
Happy New Year to All.
Thanks for the guidance on choosing which Kayfun to try. I really like it. And Bludger does look pleased.Way to go!It looks nice on the Chunky Monkey. And it looks like Bludger approves.
I'm scratching my head a bit about the choice of DT though. The chimney bore is roughly 3.5mm - slightly narrower than the Dvarw DL. (Dvarw on left) which as we know takes a 510
Maybe it was an aesthetic design choice to go with an 810 on top. Any idea?
I'm mucking around with 510 adapters but haven't found one that looks right yet
You're welcome and I'm happy you like it. I really don't know why Svoemesto went with an 810. Maybe for the cloud crowd??? IDK. Personally I think they should have made it a 510.
The Kayfun 5 Squared came with a 510 DT (as did the OG KF5). You have the 5² which is the Squared updated. I just looked at SvM's website and they don't sell an 810 to 510 adapter for the 5².
I hope you get it sorted out. An 810 DT would drive me up a wall.
Similar threads
- Locked
