Shinyitis Support Group

[Z-Lee]

Which ones did you get?

Molicel P28A's.

 

[Z-Lee]

I did like the Ft a little better but the pulse is plenty good. Sometimes it’s hard to remember to put every little detail in a review. I try my best. A lot of times I’m testing multiple set ups at the same time. I’m testing three now and have three more coming Tuesday.

Sounds like a lot of fun. Hope you're still enjoying it.

 

[Z-Lee]

In a regulated mod, there's a simple calculation to find your max wattage:

Actual CDR x 3 x no. of batteries

eg for a 25A Molicel p26a dual battery mod:
25 x 3 x 2 = 150 watts

It works in reverse too. Vaping at 70 watts in a single 18650:
70/3 = 23.3A CDR battery needed
140 watts dual battery:
140/3 = 46.6/2 = 23A CDR battery needed.

Yeah, I did the math beforehand. These batteries should be fine. I've never vaped above 60, and that was to try it out. Wasn't a fan. I'm between 40 and 50 for all of my mods.

 

[Z-Lee]

eg for a 25A Molicel p26a dual battery mod:
25 x 3 x 2 = 150 watts

Also, not sure if it's changed since july of 2018, but these are accurately rated at 35A until internal temp reaches 60 deg. C.
Same with the P28A's.

 

[Daniel Forsyth]

I just found out that I Won myself a Waffle on Facebook
And of course it's some very sexy Good Wood plus a Ragnar 35mm RTA

sorry about the average pic, it's from a video!!

 

[Z-Lee]

I just found out that I Won myself a Waffle on Facebook
And of course it's some very sexy Good Wood plus a Ragnar 35mm RTA

Damn dude, congrats!

 

[Daniel Forsyth]

Damn dude, congrats!

Thanks Mate, I'm a Very Happy Aussie

 

[Redbird11]

I just found out that I Won myself a Waffle on Facebook

I like waffles as much as anyone. But it's going to be stale when it gets to you.

 

[Z-Lee]

Thanks Mate, I'm a Very Happy Aussie

Now here's my address. :wink:

 

[virm]

moaaaaaaaaaarninja foaarsynja!

 

[Daniel Forsyth]

moaaaaaaaaaarninja foaarsynja!

How's my favourite Worm going?

 

[Pigs]

Well you know what they say....a man's brain always descends to his parts

Number of brain cells left times 3 divided by number of lifetime beers consumed times your birthday equals brain to lower parts descent rate (in thoughts/second)

 

[virm]

How's my favourite Worm going?

i'll try and get a read on that for ya, shall i

 

[virm]

my pruchase comes out anticlimactic_ trouble with the order means i must wait till after weekend till i hear from SM i guess. and i was excited to donate to the next asian genocide_ seriously can india or myanmar please get in on the vape industry?!

so no one's tried mjolnir huh?

 

[virm]

Molicel P28A's.

yumyum

 

[AngeNZ]

Also, not sure if it's changed since july of 2018, but these are accurately rated at 35A until internal temp reaches 60 deg. C.
Same with the P28A's.

Nah it's not changed, i just used the lower cdr in my example.

I also believe some of the info you received in this post earlier isn't quite right. So forgive me while i get geeky

I know this is off topic to this particular thread, but I think you mentioned in another thread yesterday that you vape at 0.15 ohms and somewhere around 50 watts. Is that what resistance and wattage you're vaping on that 10A battery? If so, please stop. Never use it again. Stick with a reputable OEM batt that is 25A or higher.
On a regulated mod, you're drawing roughly 20A at the coil and the battery drain is likely around 15A or higher depending on the voltage of your battery at a given time.

On a regulated mod, the resistance of your coil (drop-in or rba) has nothing to do with calculating your battery draw.

All the battery sees is your regulated mod's chip, and what wattage it tells the battery to pull.

So as the OP was using 2x 10A batteries that's fine up to 60 watts. Regardless of whether it is a 0.15Ω build, 0.6Ω build or a 0.11Ω build.

This is an easier calculator to use than the one at Steam Engine:
Battery Amp Draw / Drain Calculator - Vaping Hardware

More info here:
Calculating battery current draw for a regulated mod | E-Cigarette Forum

 

[Pigs]

seriously can india or myanmar please get in on the vape industry?

Too late for that Virmy. India (once with world's biggest population of vapers) passed strict anti-vape laws in 2019.

In September 2019, Nirmala Sitharaman, India's finance minister, announced a ban on vaping products—an ordinance, passed months later by parliament, that would “prohibit the production, manufacture, import, export, transport, sale, distribution, storage, and advertisement of e-cigarettes.

 

[Z-Lee]

This is an easier calculator to use than the one at Steam Engine:
Battery Amp Draw / Drain Calculator - Vaping Hardware

Beautiful! Bookmarked.

 

[AngeNZ]

There's been a severe lack of photographic skies since last weekend at the lake.

So i went foggy instead:

The road to nowhere

And a very brief splash of colour this morning:

 

[Redbird11]

There's been a severe lack of photographic skies since last weekend at the lake.

So i went foggy instead:
View attachment 941121
The road to nowhere

And a very brief splash of colour this morning:
View attachment 941123

Very nice. But you need more pictures of ducks.