Shinyitis Support Group

[charlie1465]

I prefer the 0.3 z-coil down at the lower end 20-35hz @ 28watts. Whereas I like my ni80 0.7ohm 30*2/40 Dvarw coil at 60-70hz range @ 24watts

Thanks Ange.....very helpful. I tried the 0.3 coils at my usual 16 watts at 60htz and was finding it was tasting funky. I've just tried at your suggest htz (25) and it's working fine. I do find that the Z coils run at a lower wattage across the board than some others

I've only just set it up for this so I'll give it a fair comparison and report back on flavour after doing some playing. I always run my coils just behind their quickest fire threshold as I find that both gives me best saturated flavour and less cotton scorching Funny that the 0.3 coils run the same wattage as my Dvarw's with 0.5 coils....ish

 

[charlie1465]

Good morning shinies

Coolfires will be on the way today....I ordered on a Saturday so hence the delay. They always ship express from this wholesalers so I should have them Tuesday...maybe Wednesday New flavours on the way too I'm buying too much stuff lately

Have a good one everyone

 

[Skeebo]

I am up late tonight.. Today is day 54 of incubation and another clutch of eggs has started to hatch. I've been doing this for almost 41 years and it just never gets old. You can see the egg being penetrated by the terrapins egg tooth as she (incubated for female) breaks through the shell. It may take her a day or two until she fully shows.

 

[charlie1465]

I am up late tonight.. Today is day 54 of incubation and another clutch of eggs has started to hatch. I've been doing this for almost 41 years and it just never gets old. You can see the egg being penetrated by the terrapins egg tooth as she (incubated for female) breaks through the shell. It may take her a day or two until she fully shows.

Wow...it's so interesting and awesome at the same time....the oviparous animals are an incredible subset of species when you think about it. Nature is wonderful.....
The pic makes me wonder what goes on in the terrapins brain to trigger the process....but that's the psychologist in me

 

[Pigs]

I am up late tonight.. Today is day 54 of incubation and another clutch of eggs has started to hatch. I've been doing this for almost 41 years and it just never gets old. You can see the egg being penetrated by the terrapins egg tooth as she (incubated for female) breaks through the shell. It may take her a day or two until she fully shows.

Great insight. So you can tell, even manipulate the sex by the temperature of incubation?

 

[Boudica]

Great insight. So you can tell, even manipulate the sex by the temperature of incubation?

Ohhhh!

 

[Katmar]

Good morning, Charlie, Pigs, Boudica, and all other Shinys.
Goodnight Skeeboo.
Calling for hot and humid here. Surprised, I'm sure.
@Skeebo, fascinating about the egg hatching. 41 years, AMAZING. I am beyond impressed.

 

[DeloresRose]

I am up late tonight.. Today is day 54 of incubation and another clutch of eggs has started to hatch. I've been doing this for almost 41 years and it just never gets old. You can see the egg being penetrated by the terrapins egg tooth as she (incubated for female) breaks through the shell. It may take her a day or two until she fully shows.

Do you get the feeling that we are all stood behind you, watching this egg over your shoulder? Because we are.

 

[Katmar]

Is Innokin still shipping and how's it going? Hoping it's not the same as Frannie and Classy.
My partner wants to order some stuff and they say they are still shipping, but wanted to check with you guys first. Thanks a bunch.

 

[440BB]

Is Innokin still shipping and how's it going? Hoping it's not the same as Frannie and Classy.
My partner wants to order some stuff and they say they are still shipping, but wanted to check with you guys first. Thanks a bunch.

I placed an order at innokinstore.com last week and things seemed fine. It hasn't shipped yet though.

 

[chanelvaps]

Do you get the feeling that we are all stood behind you, watching this egg over your shoulder? Because we are.

Yes, love to see another pic of the progress the little hatchling has made

 

[hittman]

Is Innokin still shipping and how's it going? Hoping it's not the same as Frannie and Classy.
My partner wants to order some stuff and they say they are still shipping, but wanted to check with you guys first. Thanks a bunch.

Yes, they are. I have a brown z80 on the way.

 

[Katmar]

I placed an order at innokinstore.com last week and things seemed fine. It hasn't shipped yet though.

Yes, they are. I have a brown z80 on the way.

Thanks, that's a BIG help.

 

[hittman]

I was thinking my innokin order had shipped but it was just an order confirmation from them Friday. I’m sure it’ll ship soon.

 

[hittman]

I emailed Hellvape to check on the replacement Arez and they’ve pushed it back to August. They are having issues getting parts like everyone else. It’s a constant frustration at my work too.

 

[charlie1465]

Is Innokin still shipping and how's it going? Hoping it's not the same as Frannie and Classy.
My partner wants to order some stuff and they say they are still shipping, but wanted to check with you guys first. Thanks a bunch.

Yup they're still shipping to the US

 

[DeloresRose]

I emailed Hellvape to check on the replacement Arez and they’ve pushed it back to August. They are having issues getting parts like everyone else. It’s a constant frustration at my work too.

Not everyone notices how much is not easy to source, now that toilet paper is available. The home improvement stores have low stock or OOS on a lot of stuff, and just try to buy a car... I’m still waiting on pole caps for my chain link fence. Glad I went with wood for the rest of it, because they still can’t source the vinyl.

 

[chanelvaps]

Not everyone notices how much is not easy to source, now that toilet paper is available. The home improvement stores have low stock or OOS on a lot of stuff, and just try to buy a car... I’m still waiting on pole caps for my chain link fence. Glad I went with wood for the rest of it, because they still can’t source the vinyl.

I have been sort of watching for a car for my grandson. Used. It is appalling what is out there. Like they took all the very very used car and then overpriced them. Normally I would go for Toyota. I can find them out there but with like 280 miles on it and twice the price it should be.
I got a letter from a dealer I bought my Toy Highlander from 5 years ago. They were asking if I was interested in selling it back to them??
It is a 2014 and I bought it 2016 with 60K mileage. Paid 19K ish for it but they wanted 22K (I am relentless in beating down a salesman). Just for the heck of it, I called and talked with a saleman who wanted to know the current mileage (130K), he asked me to hold and then came back and told me they would give me 18K for it!! Only 1K less than I paid?? I have driven it for almost 5 years.
I am not buying anything out there right now unless it is from someone I know. All the used cars are overpriced for sure

 

[DeloresRose]

I have been sort of watching for a car for my grandson. Used. It is appalling what is out there. Like they took all the very very used car and then overpriced them. Normally I would go for Toyota. I can find them out there but with like 280 miles on it and twice the price it should be.
I got a letter from a dealer I bought my Toy Highlander from 5 years ago. They were asking if I was interested in selling it back to them??
It is a 2014 and I bought it 2016 with 60K mileage. Paid 19K ish for it but they wanted 22K (I am relentless in beating down a salesman). Just for the heck of it, I called and talked with a saleman who wanted to know the current mileage (130K), he asked me to hold and then came back and told me they would give me 18K for it!! Only 1K less than I paid?? I have driven it for almost 5 years.
I am not buying anything out there right now unless it is from someone I know. All the used cars are overpriced for sure

Until a couple months ago, I was getting emails for sales from the dealership where I got the Traverse (as if I want to buy another new car less than 2 years after I got this one ). Now I’m getting offers to buy it back. If I could do without it, I bet i could make a profit.

 

[hittman]

Not everyone notices how much is not easy to source, now that toilet paper is available. The home improvement stores have low stock or OOS on a lot of stuff, and just try to buy a car... I’m still waiting on pole caps for my chain link fence. Glad I went with wood for the rest of it, because they still can’t source the vinyl.

I deal with it every day trying to get parts for the equipment I repair. I've been waiting a couple months on a couple of parts for customers machines. It seems especially printed circuit boards and molded plastic parts are hard to get. Power modules and SCR modules have been hit and miss.

I have been sort of watching for a car for my grandson. Used. It is appalling what is out there. Like they took all the very very used car and then overpriced them. Normally I would go for Toyota. I can find them out there but with like 280 miles on it and twice the price it should be.
I got a letter from a dealer I bought my Toy Highlander from 5 years ago. They were asking if I was interested in selling it back to them??
It is a 2014 and I bought it 2016 with 60K mileage. Paid 19K ish for it but they wanted 22K (I am relentless in beating down a salesman). Just for the heck of it, I called and talked with a saleman who wanted to know the current mileage (130K), he asked me to hold and then came back and told me they would give me 18K for it!! Only 1K less than I paid?? I have driven it for almost 5 years.
I am not buying anything out there right now unless it is from someone I know. All the used cars are overpriced for sure

We have had a similar experience. It seems like once a week I get something from the Mazda dealer that we bought my wife's CX9 from wanting to know if we want to sell it or trade it in. We bought it new in 2013 and she only has about 65k on it. We went to drop her car off for service about a week or so ago and the lot was almost empty. Very few new or used cars available. They might have to start dropping the prices to sell what they can get. It's really slim pickings.