Shinyitis Support Group

[charlie1465]

Now you people plz tell me how this fokking works?
On my Jackaroo pod I get just under, and just over 100 puffs on the 0.9 and 0.6ohm coils before they burn up.
I'm testing it on naturally extracted tobacco.
With the 0.3ohm coil however, I get 850 plus puffs.
I can't for the life of me figure out why the big difference. I run at the lowest possible wattages and use the exact same airflow on all 3coils.
Any ideas anyone?

Are the coils different bore...ie tighter bore on the 0.9 and 0.6 and wider bore on the 0.3. if you are running all three at about the same wattage then that's your answer....perhaps. if you're ramping up the 0.3 a bit then it's burning off more gunk when you take a puff so therefore lasting longer....just an idea

 

[hittman]

Not sure if this is a good one but saw this on the classifieds if anyone is interested

For Sale - Sunbox hand craft squonk box | E-Cigarette Forum (e-cigarette-forum.com)

 

[charlie1465]

Not sure if this is a good one but saw this on the classifieds if anyone is interested

For Sale - Sunbox hand craft squonk box | E-Cigarette Forum (e-cigarette-forum.com)

Yes I saw that. I'm not interested but someone might be....I've got so many squonkers already

 

[NolaMel]

Now you people plz tell me how this fokking works?
On my Jackaroo pod I get just under, and just over 100 puffs on the 0.9 and 0.6ohm coils before they burn up.
I'm testing it on naturally extracted tobacco.
With the 0.3ohm coil however, I get 850 plus puffs.
I can't for the life of me figure out why the big difference. I run at the lowest possible wattages and use the exact same airflow on all 3coils.
Any ideas anyone?

Maybe more af room inside the lower ohm? Leaves more space for gunk. I got around 3k on the 0.9, but only because I was waiting on new coils to come. Wouldn’t recommend it lol. NETs are just gunky by nature. I don’t vape them often, but only use an rta for that reason. I don’t love them enough to put up with the more frequent tank cleanup.

 

[Letitia]

Now you people plz tell me how this fokking works?
On my Jackaroo pod I get just under, and just over 100 puffs on the 0.9 and 0.6ohm coils before they burn up.
I'm testing it on naturally extracted tobacco.
With the 0.3ohm coil however, I get 850 plus puffs.
I can't for the life of me figure out why the big difference. I run at the lowest possible wattages and use the exact same airflow on all 3coils.
Any ideas anyone?

I'm guessing the af on the coil itself is the reason.

 

[Doffy]

Now you people plz tell me how this fokking works?
On my Jackaroo pod I get just under, and just over 100 puffs on the 0.9 and 0.6ohm coils before they burn up.
I'm testing it on naturally extracted tobacco.
With the 0.3ohm coil however, I get 850 plus puffs.
I can't for the life of me figure out why the big difference. I run at the lowest possible wattages and use the exact same airflow on all 3coils.
Any ideas anyone?

Are your puffs at 0.9 longer puffs than on the 0.3?

 

[Pigs]

I think it was the Ffs that did it.... Delro on the way in black....DNA version

woot !

 

[Resistance]

Greetings Shiny Folk
This setup is working it's magic on me.

 

[AngeNZ]

Morning shinies

Now you people plz tell me how this fokking works?
On my Jackaroo pod I get just under, and just over 100 puffs on the 0.9 and 0.6ohm coils before they burn up.
I'm testing it on naturally extracted tobacco.
With the 0.3ohm coil however, I get 850 plus puffs.
I can't for the life of me figure out why the big difference. I run at the lowest possible wattages and use the exact same airflow on all 3coils.
Any ideas anyone?

From the pics of the coils, it looks like a combination of what everyone has already said. Basically a bigger, gruntier coil with more cotton:

 

[Doffy]

Adding jogging bits to my walks, to help the ageing heart. Today was from the green traffic lights to where I was standing for the pic

Just waiting on more light, to go into the reserve

 

[Fredman1]

Fred you didn't say if you are vaping the 0.3 Ohm at a much higher wattage that the others. If you aren't
I'd say it's because of the thicker gauge wire/ mesh in the 0.3 Ohm coil.

Mate I run all 3 coils way lower than they specify. They recommend the 0.3 at 30-45. I use it at 22.

Are all three the same type of coil? Are they all mesh?

Yep, all 3 is mesh.

Are your puffs at 0.9 longer puffs than on the 0.3?

Nah I always vape the same....a 3-4sec draw.

Yeah the only thing that makes sense is the 0.3 must be a beefier coil. I'll maybe have to take them apart to satisfy my curiosity

 

[Doffy]

The Pines Flora and Fauna Reserve
13 19 63
Google Maps

Starts pretty dark



Funny thing about flocks of lorikeets is that they camouflage

But here's a screaming tree, for your enjoyment

 

[Daniel Forsyth]

Good Morning Shiny People

 

[DeloresRose]

 

[AngeNZ]

So I do understand I will be having a complete makeover that will be continual process lol

Continual yes, but usually a lot of fun 'When you be the chance - let us know more about what you are looking for, what you love using, and where you are in the vaping journey

When I first posted in this thread I had the Innokin t18 and t22 kits, and was only 2 months smoke-free. Within a month, I had a new Zenith tank happily sitting on my new Pico 75w. 2 months later - and with a lot of help from thread members, I had a sxk doggy RTA sitting on that Pico 75w. DIY ejuice soon followed.

And then came the continual upgrading, and purchasing backups for backups. Which I'm still doing

 

[hittman]

I’m to the point where any purchases are just for fun. I’ve got more hardware than I could ever use.

 

[AngeNZ]

I like that sunrise pic better than the first one

Me too, shame I only took it at that time with the mod in the way

I've got so damn fussy lately with my sunrise photos. If the colours aren't right - I ditch them. If it's over or under exposed - ditched. I still have all the originals, but I need to lose the fussyness.

It's only now that I've gained a lil bit of knowledge, that I realise how hard it is to take a decent photo shooting into the sun, during that magic blue hour/start of the golden hour.

I'm going to find some decent apps so I can merge different exposures of my foreground/backgrounds

 

[DeloresRose]

Continual yes, but usually a lot of fun 'When you be the chance - let us know more about what you are looking for, what you love using, and where you are in the vaping journey

When I first posted in this thread I had the Innokin t18 and t22 kits, and was only 2 months smoke-free. Within a month, I had a new Zenith tank happily sitting on my new Pico 75w. 2 months later - and with a lot of help from thread members, I had a sxk doggy RTA sitting on that Pico 75w. DIY ejuice soon followed.

And then came the continual upgrading, and purchasing backups for backups. Which I'm still doing

I just stumbled across this old photo from shortly after I arrived i shiny town.

I don’t think I’m over 100 mods yet but I have to be getting close.

 

[Daniel Forsyth]

Let's liven the Shiny Thread up
I've just received an email from Sourcemore and they have shipped out One Beautiful Brunhilde SBS Kit for me
The Best part is that Sourcemore didn't take the money out of my account so I have some Free Vape Mail on the way

@charlie1465 how is your lovely Brunhilde coming along Mate?

 

[DeloresRose]

I’m to the point where any purchases are just for fun. I’ve got more hardware than I could ever use.

Same. So much stuff. My poor kids are gonna lose it when I die and they have to deal with all of it!