Me three. I like how it comes with a single coil and dual coil caps. I couldn't find it in China yet, but it's in the States already:
Damn Vape Nitrous 22mm BF RDA
We need a guinea pig, or two!
Me three. I like how it comes with a single coil and dual coil caps. I couldn't find it in China yet, but it's in the States already:
Damn Vape Nitrous 22mm BF RDA
We need a guinea pig, or two!
I've been surprised how little known Oxva is. I've had the Oxva Origin for a while now, and it's very good. Excellent flavor, small and light, and no leaking.
Looking forward to hearing about the stuff you review.
I feel kinda...what's the word...maybe skunkish 
I feel the need to elaborate on my earlier post about Mrs Brunhilde. I might have sown the misconception that it's not that good of a tank...or that I don't like it. Well it is...and I do...Very much. I like it that much that I have it on my Z 80
...and that says something.
SMT's posts got me thinking about the dry burn coil washing issue I have with it. Well I took the cotton out and dry burnt it again, and did my usual steel brushing. I then tipped it upside down (no juice flows out, but you have to keep an eye on the St St ropes so they don't fall out) and sprayed the deck and coil with a small plastic sprayer. I have to flush my coils as there's gunky juice sitting on the coil surface...and on the deck area. I usually give it a soft brush while i'm washing it, but I didn't this time round as I was trying to limit the water that might get into the tank.
Well it works, and suppose it's good enough...I can get used to that. It's only a 'issue' for me because i vape NET (and have to dry burn more often) and got so spoiled by how easy the Dvarws cleans after a dry burn.
For anybody else that is into flavor, get a Brunhilde...without a doubt you won't be sorry. It's a very flavorful tank...RDA flavor from a RTA...well technically it's a RDTA
I don't want to became known as f....r that stood between you, and your flavor machine that you missed out on...
I feel the need to elaborate on my earlier post about Mrs Brunhilde. I might have sown the misconception that it's not that good of a tank...or that I don't like it. Well it is...and I do...Very much. I like it that much that I have it on my Z 80
...and that says something.SMT's posts got me thinking about the dry burn coil washing issue I have with it. Well I took the cotton out and dry burnt it again, and did my usual steel brushing. I then tipped it upside down (no juice flows out, but you have to keep an eye on the St St ropes so they don't fall out) and sprayed the deck and coil with a small plastic sprayer. I have to flush my coils as there's gunky juice sitting on the coil surface...and on the deck area. I usually give it a soft brush while i'm washing it, but I didn't this time round as I was trying to limit the water that might get into the tank.
Well it works, and suppose it's good enough...I can get used to that. It's only a 'issue' for me because i vape NET (and have to dry burn more often) and got so spoiled by how easy the Dvarws cleans after a dry burn.
For anybody else that is into flavor, get a Brunhilde...without a doubt you won't be sorry. It's a very flavorful tank...RDA flavor from a RTA...well technically it's a RDTA
I don't want to became known as f....r that stood between you, and your flavor machine that you missed out on...
sounds good. I ordered a number of the GT 6 and GT 8s which are very low ohms which is how I started Vaping but I didn’t stick with the lower ohms ie 0.15 ohms and 0.2 ohms. If you or someone else is interested in these please let me know. No sense in keeping them stashed away if I’m not going to use them.
My preferred sweet range is 0.3 to 0.5 ohms which are where the ceramic coils hit at. The GT2 is kanthal and 0.4 ohms I think. I’ll use those too. The flavor is still good.
I do like the honeycomb airflow design. Thinking of getting one of these for my Squape Arise RTA.
It's a dual-sided airflow RTA. Great flavor and super easy to build on. It's one of my favorite RTA's.
I think YFTK and another company made Arise clones. FT may have them.
Jess looks very happy. How come you don't sit out in your yard and vape?Jess (but I call her Cheeky...because she is), are hanging in the garage. Well she's hanging...i'm vaping
I wouldn't mind being on the porch with you...I love dragon flies.
View attachment 954857
I'm happy to hear you got that squared away. We would never think of you as the f....r who stood between those who totally missed out, or refuse to buy, a lovely Brunhilde flavor machine. It's their loss Fred.I feel kinda...what's the word...maybe skunkish
For anybody else that is into flavor, get a Brunhilde...without a doubt you won't be sorry. It's a very flavorful tank...RDA flavor from a RTA...well technically it's a RDTA
I don't want to became known as f....r that stood between you, and your flavor machine that you missed out on...
Meanwhile those of us who own a Brunhilde get to keep on bragging about our flavor machines.
Have you bought the Brunhilde SbS mod yet? It's a very fine and well built mod. The Brunhilde RTA looks awesome on it. A match made in vape heaven I say. I'll have to post a photo in the morning.
So who are the Brunhilde holdouts? Hmmm, lemme think...Seems like several among us have bought Brunhilde's recently.
It's just a matter of time. 
Help!!!
Fasttech can be soooooo frustrating at times. Or maybe it’s just me. I dunno. But I’ve m tried every combination of key words attempting to see if they carry this little rda but either they don’t carry it (which is a real possibility) or FT is just messing around with my head again lol!!
I can’t believe the prices - they use to be so much less expensive than US and other sites. Now I keep finding prices as much as or more than other sites. Howevah- if they’re not collecting state taxes, delivery signatures and ID proof validation fees then they may still be useful. And of course they’re great for the hard to find items like replacement glass, I rings etc..,
I’m searching for this on their site….
Digiflavor Drop Solo bf v1.5 22mm single coil
My eternal gratitude will be yours if you can find this rda regardless of it being in stock, out of stock, discontinued or whatever
!!
thanks and good night
!!
Fasttech can be soooooo frustrating at times. Or maybe it’s just me. I dunno. But I’ve m tried every combination of key words attempting to see if they carry this little rda but either they don’t carry it (which is a real possibility) or FT is just messing around with my head again lol!!
I can’t believe the prices - they use to be so much less expensive than US and other sites. Now I keep finding prices as much as or more than other sites. Howevah- if they’re not collecting state taxes, delivery signatures and ID proof validation fees then they may still be useful. And of course they’re great for the hard to find items like replacement glass, I rings etc..,
I’m searching for this on their site….
Digiflavor Drop Solo bf v1.5 22mm single coil
My eternal gratitude will be yours if you can find this rda regardless of it being in stock, out of stock, discontinued or whatever
!!thanks and good night
!!
I'm happy to hear you got that squared away. We would never think of you as the f....r who stood between those who totally missed out, or refuse to buy, a lovely Brunhilde flavor machine. It's their loss Fred.
Meanwhile those of us who own a Brunhilde get to keep on bragging about our flavor machines.
Have you bought the Brunhilde SbS mod yet? It's a very fine and well built mod. The Brunhilde RTA looks awesome on it. A match made in vape heaven I say. I'll have to post a photo in the morning.
Here's To The Brunhilde Brigade
Ha Ha..I do go sit and chat with the bonsais, but it's on the chilly side now. Besides I like sitting beside my array of mods, tanks and juicesJess looks very happy. How come you don't sit out in your yard and vape?
It's my little hide away corner
I need to look into this. FT do sell it, but it don't look like they do the honey comb airflow one.
TBH, i'm still up in the air about a SBS mate. I want, then I don't, then I want, then I don't....lately I just dunno
Jess (but I call her Cheeky...because she is), are hanging in the garage. Well she's hanging...i'm vaping
I wouldn't mind being on the porch with you...I love dragon flies.
View attachment 954857
Georgia would love Jess to come visit!
You wouldn’t be hanging around in my garage, it’s a disaster- and there’s a weasel living in there.
Which, being Ellie May Clampett, I’m cool with. And he’s a decent weasel, he is always kind enough not to scare the livin tar out of me. He does good pest control, too.
When I have to go into the garage I sometimes hear him skittering around and I’ll call out, “It’s only me, Ron! Please go hide and I’ll be gone in a minute!” And he’ll be silent and out of sight.
Me three. I like how it comes with a single coil and dual coil caps. I couldn't find it in China yet, but it's in the States already:
Damn Vape Nitrous 22mm BF RDA
We need a guinea pig, or two!
I might have to snag one of those.
I would strongly recommend you to take a pass on the V1.5, the original Version 1 has better flavor.Help!!!
Fasttech can be soooooo frustrating at times. Or maybe it’s just me. I dunno. But I’ve m tried every combination of key words attempting to see if they carry this little rda but either they don’t carry it (which is a real possibility) or FT is just messing around with my head again lol!!
I can’t believe the prices - they use to be so much less expensive than US and other sites. Now I keep finding prices as much as or more than other sites. Howevah- if they’re not collecting state taxes, delivery signatures and ID proof validation fees then they may still be useful. And of course they’re great for the hard to find items like replacement glass, I rings etc..,
I’m searching for this on their site….
Digiflavor Drop Solo bf v1.5 22mm single coil
My eternal gratitude will be yours if you can find this rda regardless of it being in stock, out of stock, discontinued or whatever
thanks and good night
View attachment 954889
Nope...nope....nope....not getting oneMeanwhile those of us who own a Brunhilde get to keep on bragging about our flavor machines.
Good morning shinies
Slow start as usual but going to get the Delro up and running in a minute
didn't have the energy yesterday....just collapsed on the sofa and slept for two hours Now to decide which bridge....I've got so many I've lost track!!
Pics later....
Have a good day all
Slow start as usual but going to get the Delro up and running in a minute
didn't have the energy yesterday....just collapsed on the sofa and slept for two hours Now to decide which bridge....I've got so many I've lost track!!Pics later....
Have a good day all
The Digiflavor Z1 SBS Kit by Delores | E-Cigarette Forum (e-cigarette-forum.com)
Couldn't sleep, up since 2 am, but at least I was somewhat productive.
@trafaz I look forward to seeing that black mod when you get it. How many mechs is too many is like asking how long is a piece of string. There's no answer to that. All I know is there is still room in the cubby, if not in the budget.
Couldn't sleep, up since 2 am, but at least I was somewhat productive.
@trafaz I look forward to seeing that black mod when you get it. How many mechs is too many is like asking how long is a piece of string. There's no answer to that. All I know is there is still room in the cubby, if not in the budget.
A Weasel in the garage, that's different. They are kind of cute, but not in the garage.
I did have a couple of 'coons try to set up shop in mine last year. They came in the old chimney flue and it was hard to persuade them to go.Similar threads
- Locked
