Shinyitis Support Group

[Fidola13]

Good night shinys! Sweet dreams of buying more vaping gear and having it delivered on time lol!!

 

[DeloresRose]

When I took a pic of @bigbob2322's mower, I also took pics inside one of the chicken sheds. So if anyone's curious how our setup looks like, look below.

Warning: These pics contain copious amounts of chicken crap!

The shed (1 of 8):
View attachment 969217
I've posted this one before. The kale paddock is on the right. The sizing is 3m along the front, and 6m long. The green bin is their fave place, as it holds their food.

View attachment 969218
Size wise - this is around 2m in length.They all jump upon here to lay their eggs, which roll down to the left. These are the last 3 stragglers - at 9am this area is absolutely chockablock full of hens.

View attachment 969219

This where I collect from. It's completely closed off from the hens by wire netting and those green screens.

I took this pic around noon, after I'd collected the bulk of the eggs earlier and it was full of eggs then. So again, this is just the stragglers.

The rows of wood at the end are the perches where the 200 chickens in this shed sleep.

And you haven't heard noisy, until you've walked into a shed of 200 chickens all trying to lay an egg - and crowing about it when they are done!

Look at those lovely brown eggs!!! There’s something very relaxing about watching chickens… it’s like watching fish swim around an aquarium.

 

[Doffy]

Look at those lovely brown eggs!!! There’s something very relaxing about watching chickens… it’s like watching fish swim around an aquarium.

I used to particularly enjoy watching my girls scratching in the dirt on hot days

My veggie garden did not

But I did

 

[Doffy]

1 mod autofired
2 Cleaned mod
3 Assembled mod
4 Put battery in mod
5 Held mod up to ear (in upward motion*) Hears "tss"
6 Quickly disassembles
7 Unassemble mod
8 Mod in oven on fan, no heat
9 Repeat steps #3-#7
10 Mod unassembled and in fan forced oven @60*C
11 Google, calculate evaporation of isopropyl
12 Repeat #3-#5
13 Repeat #5, but this time be careful to not brush past my beard (which was obviously the noise)
14 No noise
15 Facepalm
16 Reassemble
17 Hunky Dory

 

[AngeNZ]

Morning shinies

My FT order, which is only drip tips etc is in our PO box. Which means I now have nothing to track - I need to fix that

 

[hittman]

I placed a sourcemore order right before the holiday and it went out but doesn't look like it made it out of the country so it's probably going to be at least another week or two. I did notice that they shipped it 4px like they used to before the shipping started taking a long time.

 

[Tor R]

Good morning/afternoon, folks,
Three new attys will get coil&wicks today:

 

[Skeebo]

I placed a sourcemore order right before the holiday and it went out but doesn't look like it made it out of the country so it's probably going to be at least another week or two. I did notice that they shipped it 4px like they used to before the shipping started taking a long time.

I placed an order on January 24th. I got two separate tracking numbers, so I think my order was fulfilled through two separate locations. One package (through 17 Track) is already here and with USPS, so I'll probably get it next week.

The other package (same order) is through 4px and shows "HK/ hand over to airline".

 

[FranC]

My 2 SM orders landed in La. Think they’re on the way here now.

 

[Daniel Forsyth]

Good Morning Shiny People

 

[hittman]

I placed an order on January 24th. I got two separate tracking numbers, so I think my order was fulfilled through two separate locations. One package (through 17 Track) is already here and with USPS, so I'll probably get it next week.

The other package (same order) is through 4px and shows "HK/ hand over to airline".

One of mine says the same thing. The other one I placed after the holiday started says processing still. They had the Thelema Solo on sale for about $25 today. I've been wanting a blue one so grabbed that and it gave me an excuse to add a couple squonk bottles for the Centaurus that I've been thinking I should get since I like it so much.

 

[Skeebo]

One of mine says the same thing. The other one I placed after the holiday started says processing still. They had the Thelema Solo on sale for about $25 today. I've been wanting a blue one so grabbed that and it gave me an excuse to add a couple squonk bottles for the Centaurus that I've been thinking I should get since I like it so much.

Good deal. I need to order bottles for that mod as well.

 

[Fidola13]

Vape Mail! Unexpected too! I forgot that I ordered this Dead Rabbit V3 RDA LOL!

I love the one I have so I decided I needed another one !!!

 

[AngeNZ]

My vapemail isn't that exciting, unless like me you're drip tip obsessed:

It didn't include the Axial or the Boxx!

I wanted some taller dts for the Boxx, that were still fat and yet thin enough to not overhang the 510 nut. The purple is perfect. The blues are a very close second.

@Letitia these drip tip adapters are so much better than the heatsink type ones. My Axials are no longer looking like they have drip tips on stalks

 

[hittman]

My vapemail isn't that exciting, unless like me you're drip tip obsessed:

It didn't include the Axial or the Boxx!
View attachment 969276

I wanted some taller dts for the Boxx, that were still fat and yet thin enough to not overhang the 510 nut. The purple is perfect. The blues are a very close second.

@Letitia these drip tip adapters are so much better than the heatsink type ones. My Axials are no longer looking like they have drip tips on stalks

I really need to get some more drip tips but there are so many to choose from I have a hard time picking.

 

[chanelvaps]

I find I choose my size first and then choose the material I prefer. Then narrow it down

 

[hittman]

I find I choose my size first and then choose the material I prefer. Then narrow it down

I'm not sure on what size I want but know the shape I like.

 

[hittman]

I posted my review on the Fat Rabbit Solo if anyone is interested.

HELLVAPE FAT RABBIT SOLO RTA review by hittman | E-Cigarette Forum (e-cigarette-forum.com)

 

[chanelvaps]

I'm not sure on what size I want but know the shape I like.

there you go. Do you search using that

 

[Pigs]

Nothing much new on the shiny front from me.

On 20 Jan I ordered a USB C magnetic charge/data cable and a spool of 2*28/38 SS fused clapton wire from FT.

This is the cable:

$6.53 Cafele Magnetic USB-C to USB 2.0 Data & Charging Cable (200cm) at FastTech - Free Shipping

I already have one and recommend them to anyone regularly charging internally or using USB C for data. Good strong magnet and the cable has a sturdy fabric coating.

Taking a while to ship because of the wire availability but I'm in no mad rush. Says it will ship on 12 Feb.