the wind

Vaping Master
ECF Veteran
Feb 12, 2012
3,680
19,507
alabama
Yeah I don't particularly trust just any device. Then again, you would think the 'trusted' brands that been around for a while has put some R&D into their chips. The most important I think is the cut off volts on the chip.
Safest way, when in doubt is to not charge the battery completely full. Keep an eye on it and charge often....:cry:
been using aegis line (1) og and three solo's bought one at a time.the only one that has a problem is the newest.BACK IN THE DAY THEY BUILT THEM BETTER:D
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Very smooth airflow also. The bridg’d is good for flavor but is a little turbulent. The mobb is smoother but one flavor overpowers the others so I don’t get the little nuances. The only nick I have on the Dope is it’s a little tight with the 3mm pin , but I’m getting used to it. My build is the same coil I use for most a 3*30x38 alien .4 ohm.
Yup...I'm avoiding the Dope because I know it'll be too tight.
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Good evening Shinies :wub:

@Fredman1 happy belated vapeversary mate....good job :)

I've been missing all the excitement around here due to unreasonable megalomania just a few doors down.....no amount of reasonably thought out shenanigans will work. It'll be a bad job either way. I shouldn't laugh but I have been today....it's so completely bonkers :rolleyes:

Had to pay tax on my 3f order but after they kindly downgraded their customs price declaration it was still cheaper than the original shipping (tax included option). Still incoming though :pervy:

See you later!
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
What exactly do you guys propose NATO and the US do?

NATO and the US are not looking to get 'into it' with Russia (as in WWIII). A war with Russia, in all likelihood, would escalate very quickly, and in a not so pleasing direction, as Western forces overran Russian forces.

Push Putin into a corner with Great Risk. Don't forget the world power who is supporting Putin. China. Funny, the last US president is currently blabbering on about how this wouldn't have happened under his watch (he is a supporter of Putin ;)).

Putin has been planning this for many years.

I'm not saying we should sit by idly and let Putin have his way in Ukraine. What I am saying is any response needs to be VERY well thought out by NATO and the US. Frankly I don't see NATO and the US doing much of anything once Putin grabs the land he's after and replaces the current Ukrainian government with puppets who support Russia.

Historically the Ukraine has been a pawn in many wars going back hundreds of years.

Economically things will get very rough for everyone in our World.

Folks need to remember that Russia exports an awful lot to the rest of the World in our global economy.


Well...


Well...
Well....what? :D

I have instructed my Ambassador to the shiny thread to make a statement shortly......

Ah....things have now gone exactly as expected :rolleyes:
 

AngeNZ

ShutterBug
Supporting Member
ECF Veteran
  • Mar 24, 2018
    11,363
    88,365
    New Zealand
    Morning shinies ;)

    Mixed up a storm this morning. I've finally got down to 4 ADV mixes, from 6+. It's so much easier as now I'm doing double 60ml batches of each recipe, instead of keeping track of what's low and what's not.

    But it's definitely autumn down here - and my vg pouring technique hasn't adjusted yet. I eventually got enough into the bottle, instead of around it :facepalm:
     

    Daniel Forsyth

    Vaping Master
    ECF Veteran
  • Mar 26, 2019
    9,443
    57,141
    45
    Victoria, Australia
    Ordered z80 kit no. 5 this morning. Mainly due to it being reduced to a ridiculous $49nzd, and it's one of my top 3 mods, and! It gives me another Zenith II tank for the JustInCaseICan'tRewickBecauseAChickenAteMyArm situation.

    Innokin Coolfire Z80 Kit

    I've got myself a Zenith II tank due for delivery today, I'm looking forward to a stepup from number 1;)
    I'm actually having a bit of wicking issues at the moment with poor Brunhilde, so she needs a break now and then:thumb:
     
    Last edited:

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,363
    88,365
    New Zealand
    I've got myself a Zenith II tank due for delivery today, I'm looking forward to a stepup from number 1;)
    I'm actually having a bit of wicking issues at the moment with poor Brunhilde, so she needs a break now and then:thumb:

    It's a huge stepup. A tonne more airflow, a tonne more vapour and maybe even better flavour with the 0.3ohm coils.
     

    Fredman1

    Vaping Master
    ECF Veteran
    Mar 27, 2017
    4,052
    22,790
    68
    New Zealand
    I've got myself a Zenith II tank due for delivery today, I'm looking forward to a stepup from number 1;)
    I'm actually having a bit of wicking issues at the moment with poor Brunhilde, so she needs a break now and then:thumb:

    Since I took out the cables, plugged the holes and drip by hand, I get better flavor from Mrs Brunhilde. She's a new tank now mate.
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,638
    180,085
    Somewhere between here and there
    It's a huge stepup. A tonne more airflow, a tonne more vapour and maybe even better flavour with the 0.3ohm coils.

    The .3 quickly became my favorite coil for that tank.
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Vapemail.
    Thanks for the wire reccomendation Ange.

    20220228_125258.jpg
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    I've got myself a Zenith II tank due for delivery today, I'm looking forward to a stepup from number 1;)
    I'm actually having a bit of wicking issues at the moment with poor Brunhilde, so she needs a break now and then:thumb:
    That sounds similar to me. Is it the wicking rods do you think? I ended up grabbing mine with two sets of pliers and ever so slightly untwisting one end of each. Worked a treat and another plus is that they sit up in the deck just how I want them with no slippage :wub:
     

    Daniel Forsyth

    Vaping Master
    ECF Veteran
  • Mar 26, 2019
    9,443
    57,141
    45
    Victoria, Australia
    That sounds similar to me. Is it the wicking rods do you think? I ended up grabbing mine with two sets of pliers and ever so slightly untwisting one end of each. Worked a treat and another plus is that they sit up in the deck just how I want them with no slippage :wub:

    There's nothing wrong with my Brunhilde's Mate, it's me! My left eye has been going a bit funny for a little while now and I've recently been diagnosed with a cataract which isn't really handy with the wicking situation right nowo_O
    I just need to adjust to things a bit better with the one eye.
    I'll be wickin' again with the best of em' in no time at all;)
     

    Users who are viewing this thread