Shinyitis Support Group

[Fidola13]

Morning everyone. Feeling slightly better and my hands don’t seem to be trembling as much as usual so hopefully I can get the Blaze up and running.

I also want to recoil and rewick some of my other daily RBAs and maybe grab another shiny that I haven’t tried or even taken out of the packaging!

What qualifications are needed to do reviews for some of these vendors or manufacturers? vaporesso requested me to be a Super User but i declined because most of the new gear are pods. And I have no use for pods or aois. Plus the paperwork was very lengthy. This was about 2 years ago so I wasn’t sure I had enough experience to be doing reviews. Or maybe I’m making it more difficult it than it really is.

question of the day: what’s the difference between an Aromizer v3 and the Supreme v3? I really want to know lol!!?

 

[Fidola13]

the v3 holds 7mls

I think the other steam crave attys hold about 7 too but not sure. I also have the different versions of the Aromizer I think they hold quite a bit of juice as well.

 

[hittman]

Morning everyone. Feeling slightly better and my hands don’t seem to be trembling as much as usual so hopefully I can get the Blaze up and running.

I also want to recoil and rewick some of my other daily RBAs and maybe grab another shiny that I haven’t tried or even taken out of the packaging!

What qualifications are needed to do reviews for some of these vendors or manufacturers? Vaporesso requested me to be a Super User but i declined because most of the new gear are pods. And I have no use for pods or aois. Plus the paperwork was very lengthy. This was about 2 years ago so I wasn’t sure I had enough experience to be doing reviews. Or maybe I’m making it more difficult it than it really is.

question of the day: what’s the difference between an Aromizer v3 and the Supreme v3? I really want to know lol!!?

Evidently not much experience is needed to do reviews. I know Sourcemore has picked one or two that have very little. I really didn’t have a lot when I first started doing reviews but gained experience as I went.

 

[Territoo]

I'm wanting to rewick my Fat Rabbit, but I can't get the deck section off. Funny, when I first got it, I had a hard time keeping it together. Right now I got the sections wrapped in duct tape for better grip and I got the thing in the freezer, hoping that the cold will pull the sections apart a bit. Anybody got any other ideas?

 

[Territoo]

I'm wanting to rewick my Fat Rabbit, but I can't get the deck section off. Funny, when I first got it, I had a hard time keeping it together. Right now I got the sections wrapped in duct tape for better grip and I got the thing in the freezer, hoping that the cold will pull the sections apart a bit. Anybody got any other ideas?

NM. I got them apart.

 

[Pigs]

Morning everyone. Feeling slightly better and my hands don’t seem to be trembling as much as usual so hopefully I can get the Blaze up and running.

I also want to recoil and rewick some of my other daily RBAs and maybe grab another shiny that I haven’t tried or even taken out of the packaging!

What qualifications are needed to do reviews for some of these vendors or manufacturers? Vaporesso requested me to be a Super User but i declined because most of the new gear are pods. And I have no use for pods or aois. Plus the paperwork was very lengthy. This was about 2 years ago so I wasn’t sure I had enough experience to be doing reviews. Or maybe I’m making it more difficult it than it really is.

question of the day: what’s the difference between an Aromizer v3 and the Supreme v3? I really want to know lol!!?

You could do reviews for sure @Fidola13 . You have more vape gear than most and you express yourself well. Nothing stopping you.
I'm sure we'd all enjoy reading your reviews.

 

[hittman]

I'm wanting to rewick my Fat Rabbit, but I can't get the deck section off. Funny, when I first got it, I had a hard time keeping it together. Right now I got the sections wrapped in duct tape for better grip and I got the thing in the freezer, hoping that the cold will pull the sections apart a bit. Anybody got any other ideas?

I just bought another one and struggled getting the deck off too. They really should have just made the deck threaded.

You could do reviews for sure @Fidola13 . You have more vape gear than most and you express yourself well. Nothing stopping you.
I'm sure we'd all enjoy reading your reviews.

I agree. I'd definitely read her reviews.

 

[FranC]

Vape Mail she's finally arrived
Meet my new Brunhilde 103 RTA
View attachment 977325
Now I need to give her a little wash then I have two coils ready and waiting to go in a wick up. It's going to be very nice having a vape with Brunhilde tonight

Enjoy.

 

[Fidola13]

You could do reviews for sure @Fidola13 . You have more vape gear than most and you express yourself well. Nothing stopping you.
I'm sure we'd all enjoy reading your reviews.

thanks so much. I’m not really interested but was curious if there was a certain amount of experience needed.

I’ll continue to do my own little reviews of the gear I get here hopefully it’ll be useful for some people.

 

[Fidola13]

I just bought another one and struggled getting the deck off too. They really should have just made the deck threaded.



I agree. I'd definitely read her reviews.

the quarter turn of the fat rabbit is a pita imo. As said above it should’ve just been normal threading.

 

[Territoo]

I had to rewick my Fat Rabbit because I was getting dry hits and had over stuffed it a bit. Fortunately, I didn't have difficulty getting it separated the second time.

 

[AngeNZ]

Morning shinies

Since I love the chip so much, I may have ordered a Vaporesso target 100 yesterday. That's 2 mods in a week - my new record

 

[Tor R]

Good evening folks,
at home after an afternoon in the woods
I'm a bit into thinking, should not, but .... but
If it had been micro I would have pulled the card asap, I have no micro and the colors would fit perfectly with my prime dlc .... but this is a Mini.
But I can not stop and look at it ....

This will arrive in the store on July 20, kfl'21 needle, fast on / off juice control, fast on filling, the dimensions are 24x42mm, I will wait to see reviews before I decide.

Reminds me of the JAC.

totally agree Sarah.
They still produce JAC, and the price has not changed much over the years, I think JAC is one of the best buys. Mine has come into use with a Tripod atty.

 

[Daniel Forsyth]

Enjoy.

I most definitely will Fran
Two 0.4 ohm coils were put in last night and I wicked them up, I'll get some juice in her today and have a vape

 

[Daniel Forsyth]

Good Morning Shiny People

 

[ShowMeTwice]

This will arrive in the store on July 20, kfl'21 needle, fast on / off juice control, fast on filling, the dimensions are 24x42mm, I will wait to see reviews before I decide.

The Kayfun X has been receiving excellent reviews in the private Svoë Mesto FB group. There are quite a few who have been using theirs since the Hall of Vape show. I have yet to see someone who has one say anything negative about it. Same great flavorful Kayfun vape. JFC like the Prime, K4 and K5. Top fill. The airflow wide open is ~1.8mm (too tight for my liking).

I am much more interested in buying the Atmizoo Aer 24mm RTA (see link for details) that was also announced and shown at Hall of Vape in Germany. It has the deck of the DotShell (rounded ). It has also been receiving very positive reviews from those who have it.

Aer airflow is MTL/RDL/DL - AF pins 0.8mm/1.0mm/1.2mm/ 1.5mm/1.8mm, pinned inside a 4.0mm nest, plus five airflow tubes with air hole diameters 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm (last one also serving as an AF pins nest). You can always skip the tubes and enjoy a perfect, airy 5.0mm Direct Lung draw. I'll likely pass on Tripod 2, I'm happy with my two OG Tripod's.

"We expect to release the 1st batch of the Aer and Tripod 2 RTA's around the end of the summer / early autumn." If they run this the same as they have with their previous products then those in the private Atmizoo FB group will be able to order them long before the public release.

 

[ShowMeTwice]

@Tor R the video is in German. He has some excellent closeups for the Kayfun X and also puts a build in his. It's the same build deck as the KFL19 and the Kayfun Lite [PLUS] 2021 with Aerokon AF.



Currently there are only a few YT videos up for the X.

 

[hittman]

Morning shinies

Since I love the chip so much, I may have ordered a Vaporesso target 100 yesterday. That's 2 mods in a week - my new record

I’ve been using the Target 100 since I got it for review. It’s become on of my favorite mods. I really like the tank too.

 

[AngeNZ]

Today's vapemail -Vaporesso Target 100:

It is so tiny for a 21700, even compared to my 18650 z80. And especially compared to the fluffy mammoth in the bg.

The handfeel is perfect and the chip is fantastic. @hittman gets the blame for this one, and I'm glad he pointed it out.

When it first came out, I always presumed it was too tall. But when I checked the heights on FT between this and the Gen 80s and saw they were the same, it blew that argument out. Now I'm convincing myself I only need 1.

 

[hittman]

Today's vapemail -Vaporesso Target 100:

View attachment 977361

It is so tiny for a 21700, even compared to my 18650 z80. And especially compared to the fluffy mammoth in the bg.

The handfeel is perfect and the chip is fantastic. @hittman gets the blame for this one, and I'm glad he pointed it out.

When it first came out, I always presumed it was too tall. But when I checked the heights on FT between this and the Gen 80s and saw they were the same, it blew that argument out. Now I'm convincing myself I only need 1.

Good luck holding out on buying more. They are pretty inexpensive. My other current favorite is the Lost Vape Thelema Solo. I trashed mine trying to put a dna board in it so ordered another one but it got lost in transit so I’m waiting for it to be reshipped. I also preordered a dna version but don’t know when it will ship.