My stormtrooper BXR arrived today from 3Fvape.
Feels nice to hold, chip fires fast and the quality of the finish is good but has some rattle in the fire button. Battery cap threads are smooth and the door is tight. No play at all.
Overall first impression is excellent, especially for a USD$55 mod.
With the side and front inlets, the air is more open than any of my other boro mods including the Boxx.
It's smaller than I thought it would be. Here it is next to a delro for comparison:
I recently received a message from Tina from Freemax which I thought was a little bizarre
For some reason Freemax think that I know my pod vapes really well and would like me to test out two new pods coming out.
I don't know my pods really well I've only got the one!!
So I said thanks but no thanks and passed on the names of @hittman and @bigbob2322
I'll test em for them. I love a good quality pod....top of the pile being the Jackaroo...IMHO.
I won't be up for writing reviews though. They certainly won't be enjoying that much. I have enough trouble as it is, stringing coherent posts together here
I'll test em for them. I love a good quality pod....top of the pile being the Jackaroo...IMHO.
I won't be up for writing reviews though. They certainly won't be enjoying that much. I have enough trouble as it is, stringing coherent posts together here
Apologies for not dropping in lately,been a rough month...will post later the reason with a spoiler tag so i don't clutter the shiny thread up.
I'll start with the vaping stuff,been using the iTank since i quit rebuildables,guess it's ok.
Not really a fan of the fill in system,twist cap is always a pain,gotta put on my glasses to figure out where the Vaporesso logo is.
Been using the 0.4 ohm coils and recently the Spanish vape shop i buy from (online) got the 0.15 coils and i really liked those so i switched and i am using those at the moment.
Freemax got in contact with me and at the end of this month they are sending me some new products to test out and review.
Voopoo also sent me a message to see if i wanted to collaborate and now just waiting to see what i am getting for review purposes,do hope it's something with the MAAT Tank,been wanting to check that one out.
Shiny wise haven't bought much,found a Jackaroo 100w in a obscure Spanish website from a small store,snagged it up for only 24,99 euros plus 4,99 euros delivery cost.
Guys know me,i do love me the Jackaroos,feels heavy and solid and i love the rubbery like grip.
Ok so done with vaping and shiny stuff,been away for awhile so here goes the reason why i haven't been here almost at all (under spoiler tag so i don't clutter this up)
Pops been at the hospital for a month...
Nurse at the Dialysis clinic screwed up and didn't put the clamp properly on my dad's arm (where he has the fistula),so the clamp came off and my pops couldn't use the other arm to cover the blood that was coming out.
Other patients were all tied up with their Dialysis so they couldn't help and neither the nurses or the doc were there,pops yelled and yelled but by the time the nurse and doc made it there my pops went into hypovolaemic shock.
Luckily they made it in time before he went into cardiac arrest,if that would have happened and judging by his health at the time he would have been gone...
They didn't call me or nothing,i was waiting downstairs for my pops to arrive for 2 hours went by and nothing....called the Dialysis center and they knew nothing.
After 4 hours i got a call from the hospital,for now he is doing ok....extremely weak thou,he has been a month at the hospital and he still has to stay about 15 days more.
I go everyday to the hospital to be with him and stay until night time,come home,cook some dinner,watch a movie and then to bed.
Next day its all the same thing,some days like today that he is doing better i head home for some me time but yeah i am still pretty shaken up about it.
Not a vengeful person but i want accountability and i want that nurse fired,already been talking with a lawyer and i am going ahead and sue them.
It is not about money,it's about doing the right thing and hopefully this won't happen to anyone else due to someone not being good at their job.
Doctor is optimistic thou,he is ''supposedly'' going to make a full recovery,says it could have been much worst.
So thats about it folks,hanging by a thread here but i am doing the best i can to remain afloat.
I'll test em for them. I love a good quality pod....top of the pile being the Jackaroo...IMHO.
I won't be up for writing reviews though. They certainly won't be enjoying that much. I have enough trouble as it is, stringing coherent posts together here
Glad I am not the only one. Sometimes I make a post and erase it before I post it because I feel everyone will either LOL or think I have Alzheimers (not meant to offend any one that has it)
Apologies for not dropping in lately,been a rough month...will post later the reason with a spoiler tag so i don't clutter the shiny thread up.
I'll start with the vaping stuff,been using the iTank since i quit rebuildables,guess it's ok.
Not really a fan of the fill in system,twist cap is always a pain,gotta put on my glasses to figure out where the Vaporesso logo is.
Been using the 0.4 ohm coils and recently the Spanish vape shop i buy from (online) got the 0.15 coils and i really liked those so i switched and i am using those at the moment.
Freemax got in contact with me and at the end of this month they are sending me some new products to test out and review.
Voopoo also sent me a message to see if i wanted to collaborate and now just waiting to see what i am getting for review purposes,do hope it's something with the MAAT Tank,been wanting to check that one out.
Shiny wise haven't bought much,found a Jackaroo 100w in a obscure Spanish website from a small store,snagged it up for only 24,99 euros plus 4,99 euros delivery cost.
Guys know me,i do love me the Jackaroos,feels heavy and solid and i love the rubbery like grip.
Ok so done with vaping and shiny stuff,been away for awhile so here goes the reason why i haven't been here almost at all (under spoiler tag so i don't clutter this up)
Pops been at the hospital for a month...
Nurse at the Dialysis clinic screwed up and didn't put the clamp properly on my dad's arm (where he has the fistula),so the clamp came off and my pops couldn't use the other arm to cover the blood that was coming out.
Other patients were all tied up with their Dialysis so they couldn't help and neither the nurses or the doc were there,pops yelled and yelled but by the time the nurse and doc made it there my pops went into hypovolaemic shock.
Luckily they made it in time before he went into cardiac arrest,if that would have happened and judging by his health at the time he would have been gone...
They didn't call me or nothing,i was waiting downstairs for my pops to arrive for 2 hours went by and nothing....called the Dialysis center and they knew nothing.
After 4 hours i got a call from the hospital,for now he is doing ok....extremely weak thou,he has been a month at the hospital and he still has to stay about 15 days more.
I go everyday to the hospital to be with him and stay until night time,come home,cook some dinner,watch a movie and then to bed.
Next day its all the same thing,some days like today that he is doing better i head home for some me time but yeah i am still pretty shaken up about it.
Not a vengeful person but i want accountability and i want that nurse fired,already been talking with a lawyer and i am going ahead and sue them.
It is not about money,it's about doing the right thing and hopefully this won't happen to anyone else due to someone not being good at their job.
Doctor is optimistic thou,he is ''supposedly'' going to make a full recovery,says it could have been much worst.
So thats about it folks,hanging by a thread here but i am doing the best i can to remain afloat.
Apologies for not dropping in lately,been a rough month...will post later the reason with a spoiler tag so i don't clutter the shiny thread up.
I'll start with the vaping stuff,been using the iTank since i quit rebuildables,guess it's ok.
Not really a fan of the fill in system,twist cap is always a pain,gotta put on my glasses to figure out where the Vaporesso logo is.
Been using the 0.4 ohm coils and recently the Spanish vape shop i buy from (online) got the 0.15 coils and i really liked those so i switched and i am using those at the moment.
Freemax got in contact with me and at the end of this month they are sending me some new products to test out and review.
Voopoo also sent me a message to see if i wanted to collaborate and now just waiting to see what i am getting for review purposes,do hope it's something with the MAAT Tank,been wanting to check that one out.
Shiny wise haven't bought much,found a Jackaroo 100w in a obscure Spanish website from a small store,snagged it up for only 24,99 euros plus 4,99 euros delivery cost.
Guys know me,i do love me the Jackaroos,feels heavy and solid and i love the rubbery like grip.
Ok so done with vaping and shiny stuff,been away for awhile so here goes the reason why i haven't been here almost at all (under spoiler tag so i don't clutter this up)
Pops been at the hospital for a month...
Nurse at the Dialysis clinic screwed up and didn't put the clamp properly on my dad's arm (where he has the fistula),so the clamp came off and my pops couldn't use the other arm to cover the blood that was coming out.
Other patients were all tied up with their Dialysis so they couldn't help and neither the nurses or the doc were there,pops yelled and yelled but by the time the nurse and doc made it there my pops went into hypovolaemic shock.
Luckily they made it in time before he went into cardiac arrest,if that would have happened and judging by his health at the time he would have been gone...
They didn't call me or nothing,i was waiting downstairs for my pops to arrive for 2 hours went by and nothing....called the Dialysis center and they knew nothing.
After 4 hours i got a call from the hospital,for now he is doing ok....extremely weak thou,he has been a month at the hospital and he still has to stay about 15 days more.
I go everyday to the hospital to be with him and stay until night time,come home,cook some dinner,watch a movie and then to bed.
Next day its all the same thing,some days like today that he is doing better i head home for some me time but yeah i am still pretty shaken up about it.
Not a vengeful person but i want accountability and i want that nurse fired,already been talking with a lawyer and i am going ahead and sue them.
It is not about money,it's about doing the right thing and hopefully this won't happen to anyone else due to someone not being good at their job.
Doctor is optimistic thou,he is ''supposedly'' going to make a full recovery,says it could have been much worst.
So thats about it folks,hanging by a thread here but i am doing the best i can to remain afloat.
I'm so sorry that happened to your dad. I definitely understand where you're coming from as far as the nurse being held accountable. To me it seems odd that there wasn't a nurse or doctor in the room for that long. I hope he makes a full recovery.
I know you may have just recently seen my review on the Argus XT and might wonder why I didn’t combine it with this review on the Argus MT. Well, Voopoo requested two reviews so that is what I’m doing. They have always been excellent to deal with...
The Aspire EVO 75 is a kit (tank + mod). The mod is the Aspire NX75-Z (zinc alloy). I don't know anything about the tank.
I have a couple NX75-A's. The NX75-A (aluminum) and NX75-S (stainless steel) were the CNC'ed versions. Those were much higher quality (versus the Z). The A and S CNC'ed versions were limited runs and sold out very quickly.
There are a few folks on ECF who have the A and S versions that are very happy with them.
Mine are still running perfectly fine. Not bad at all for mods that came out in 2016.
All three use the same chipset. It works fine in all modes. Aspire's TC is acceptable, IMO. No, it is not the same as my DNA mods or the Dicodes chips but Aspire's TC works fine.
IMHO they are excellent mods. If you can find any of the NX75 A or S CNC'ed versions - - - don't hesitate, just buy them!
Zero negatives. All positives when it comes to Aspire mods.
Apologies for not dropping in lately,been a rough month...will post later the reason with a spoiler tag so i don't clutter the shiny thread up.
I'll start with the vaping stuff,been using the iTank since i quit rebuildables,guess it's ok.
Not really a fan of the fill in system,twist cap is always a pain,gotta put on my glasses to figure out where the Vaporesso logo is.
Been using the 0.4 ohm coils and recently the Spanish vape shop i buy from (online) got the 0.15 coils and i really liked those so i switched and i am using those at the moment.
Freemax got in contact with me and at the end of this month they are sending me some new products to test out and review.
Voopoo also sent me a message to see if i wanted to collaborate and now just waiting to see what i am getting for review purposes,do hope it's something with the MAAT Tank,been wanting to check that one out.
Shiny wise haven't bought much,found a Jackaroo 100w in a obscure Spanish website from a small store,snagged it up for only 24,99 euros plus 4,99 euros delivery cost.
Guys know me,i do love me the Jackaroos,feels heavy and solid and i love the rubbery like grip.
Ok so done with vaping and shiny stuff,been away for awhile so here goes the reason why i haven't been here almost at all (under spoiler tag so i don't clutter this up)
Pops been at the hospital for a month...
Nurse at the Dialysis clinic screwed up and didn't put the clamp properly on my dad's arm (where he has the fistula),so the clamp came off and my pops couldn't use the other arm to cover the blood that was coming out.
Other patients were all tied up with their Dialysis so they couldn't help and neither the nurses or the doc were there,pops yelled and yelled but by the time the nurse and doc made it there my pops went into hypovolaemic shock.
Luckily they made it in time before he went into cardiac arrest,if that would have happened and judging by his health at the time he would have been gone...
They didn't call me or nothing,i was waiting downstairs for my pops to arrive for 2 hours went by and nothing....called the Dialysis center and they knew nothing.
After 4 hours i got a call from the hospital,for now he is doing ok....extremely weak thou,he has been a month at the hospital and he still has to stay about 15 days more.
I go everyday to the hospital to be with him and stay until night time,come home,cook some dinner,watch a movie and then to bed.
Next day its all the same thing,some days like today that he is doing better i head home for some me time but yeah i am still pretty shaken up about it.
Not a vengeful person but i want accountability and i want that nurse fired,already been talking with a lawyer and i am going ahead and sue them.
It is not about money,it's about doing the right thing and hopefully this won't happen to anyone else due to someone not being good at their job.
Doctor is optimistic thou,he is ''supposedly'' going to make a full recovery,says it could have been much worst.
So thats about it folks,hanging by a thread here but i am doing the best i can to remain afloat.
The Aspire EVO 75 is a kit (tank + mod). The mod is the Aspire NX75-Z (zinc alloy). I don't know anything about the tank.
I have a couple NX75-A's. The NX75-A (aluminum) and NX75-S (stainless steel) were the CNC'ed versions. Those were much higher quality (versus the Z), the A and S were limited runs and sold out very quickly.
There are a few folks on ECF who have the A and S versions that are very happy with them.
Mine are still running perfectly fine. Not bad at all for mods that came out in 2016.
All three use the same chipset. It works fine in all modes. Aspire's TC is acceptable, IMO. No, it is not the same as my DNA mods or the Dicodes chips but Aspire's TC works fine.
IMHO they are excellent mods. If you can find any of the NX75 A or S CNC'ed versions - - - don't hesitate, just buy them!
Zero negatives. All positives when it comes to Aspire mods.
Most likely it is zinc alloy, doesn't look very shiny in the pictures.
I'll think about it over the weekend, 50$ for the whole kit, the atty will probably end up where most kit attys end up, in the trash.
For a mod that sees a lot of use it's held up quite nicely. No wear or scratches. I have one of my Van & Del Soul S RDA's on top setup for dripping in TC mode.
Wow brother., nice to be back and good to see everyone still going strong. I had a rough and tough year,but I'm trying to keep my head up and keep going.
Apologies for not dropping in lately,been a rough month...will post later the reason with a spoiler tag so i don't clutter the shiny thread up.
I'll start with the vaping stuff,been using the iTank since i quit rebuildables,guess it's ok.
Not really a fan of the fill in system,twist cap is always a pain,gotta put on my glasses to figure out where the Vaporesso logo is.
Been using the 0.4 ohm coils and recently the Spanish vape shop i buy from (online) got the 0.15 coils and i really liked those so i switched and i am using those at the moment.
Freemax got in contact with me and at the end of this month they are sending me some new products to test out and review.
Voopoo also sent me a message to see if i wanted to collaborate and now just waiting to see what i am getting for review purposes,do hope it's something with the MAAT Tank,been wanting to check that one out.
Shiny wise haven't bought much,found a Jackaroo 100w in a obscure Spanish website from a small store,snagged it up for only 24,99 euros plus 4,99 euros delivery cost.
Guys know me,i do love me the Jackaroos,feels heavy and solid and i love the rubbery like grip.
Ok so done with vaping and shiny stuff,been away for awhile so here goes the reason why i haven't been here almost at all (under spoiler tag so i don't clutter this up)
Pops been at the hospital for a month...
Nurse at the Dialysis clinic screwed up and didn't put the clamp properly on my dad's arm (where he has the fistula),so the clamp came off and my pops couldn't use the other arm to cover the blood that was coming out.
Other patients were all tied up with their Dialysis so they couldn't help and neither the nurses or the doc were there,pops yelled and yelled but by the time the nurse and doc made it there my pops went into hypovolaemic shock.
Luckily they made it in time before he went into cardiac arrest,if that would have happened and judging by his health at the time he would have been gone...
They didn't call me or nothing,i was waiting downstairs for my pops to arrive for 2 hours went by and nothing....called the Dialysis center and they knew nothing.
After 4 hours i got a call from the hospital,for now he is doing ok....extremely weak thou,he has been a month at the hospital and he still has to stay about 15 days more.
I go everyday to the hospital to be with him and stay until night time,come home,cook some dinner,watch a movie and then to bed.
Next day its all the same thing,some days like today that he is doing better i head home for some me time but yeah i am still pretty shaken up about it.
Not a vengeful person but i want accountability and i want that nurse fired,already been talking with a lawyer and i am going ahead and sue them.
It is not about money,it's about doing the right thing and hopefully this won't happen to anyone else due to someone not being good at their job.
Doctor is optimistic thou,he is ''supposedly'' going to make a full recovery,says it could have been much worst.
So thats about it folks,hanging by a thread here but i am doing the best i can to remain afloat.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
