Omg, I am so happy for the info, thanks!!!As Ange mentioned I do have a couple of Brunhilde MTL RTA's in rotation, I recently received number 8 so don't mind the things at all. And I was given a discount with my next purchase so number 9 could be on the cards, but that's another story for another day
I primarily use 70vg/30pg juice in my Brunhilde's but also have used juice as low as 50/50 and everything in between and it wicks absolutely fantastic without any problems. I use ribbon wire now but was previously using 30×2/38 Ni80 baby clapton wire for a long time and found that to be great in Brunhilde. The clapton wire was always a very smooth vape with 70vg/30pg with whichever insert I tried in her, I use all of mine with no inserts now for a RDL vape. I have always vaped between 20-30 watts with mine, I mainly have my mods set at 23.2 watts.
I have found a 2.5mm coil is the best ID for Brunhilde and with the clapton wire I had 6 wraps for around 0.5 ohms.
So in a nutshell the Brunhilde MTL RTA will wick fantastic and he a very nice smooth vape with a small clapton build whatever insert you use and using any juice from 50vg/50pg to 70vg/30pg. I even tried 60vg/40pg on quite a few occasions with no issues!
I hope I've given you some handy info Mate and I hope it all makes sense because I'm only halfway through my coffee intake for the morning so that means I'm still bloody half asleepPlease don't hesitate to let me know if you need any more info on these flavour bangers and I'll be more than happy to help
I will start building on mtl today, I think I start with the 50/50 and try the out the claptons first, and work from there.
I tried 80/20 in my 1o3 and found it to be too thick for normal wicking, maybe should have gone for panckacke wicking by that vg/pg, but I rather make a thinner juice this time.
I have some kanthal ribbon aswell might try that out too. Whats the difference between vaping it with ribbon instead of clapton?
Thanks again! Havent had my coffe yet, going to make an espresso tho, only 3,5/4h sleep need it alot!
What a nice torough reply to wake up to, really got my passion going for that RTA, sooooo waiting to build on it today!!!
It's my absolute pleasure for any info on Brunhilde MTL RTA
I have a few 103's also but have only used 70vg/30pg juice and my ribbon wire with those ones. I've never had any wicking issues with that juice ratio in the 103. I only use the single coil in them and close down the airflow to a nice RDL so it's a similar vape to Brunhilde MTL.
The ribbon wire that I use is Ni80 0.8mm×0.2mm and the main difference over clapton wire is that there is more surface area so that means more flavour
plus I find the ribbon wire doesn't gunk up as much as clapton wire does! It may be a little bit of a pain to wrap a coil with ribbon wire compared to clapton to start but you will get the hang of it. I definitely recommend giving the ribbon wire a go!!Happy Building and as I mentioned I'm always available for any more tips!
That group must be the most fun and friendliest there ever is on the internet. Thank you and everybody for being such fun people.It's my absolute pleasure for any info on Brunhilde MTL RTA
I have a few 103's also but have only used 70vg/30pg juice and my ribbon wire with those ones. I've never had any wicking issues with that juice ratio in the 103. I only use the single coil in them and close down the airflow to a nice RDL so it's a similar vape to Brunhilde MTL.
The ribbon wire that I use is Ni80 0.8mm×0.2mm and the main difference over clapton wire is that there is more surface area so that means more flavour
Happy Building and as I mentioned I'm always available for any more tips!
I have wrapped ribbon before, 0.2x0.8 shouldnt be too hard, I wrapped a thinner wire into my oxva, but the resulting wape was too hot, because of the small chamber I think and the wire was really thin 0.1x0.4 if I recall it right.
I figured too that I'd be using the 1o3 as single coiler.
I always thought about claptons, is it just me or do they actually gunk faster. I got reassured about that too.
Thanks again!!! Have a great day!!!
Good Afternoon EveryOne 
I haven't had one of my Luna's out in a good long while. Topped with a Van & Del Design Soul S RDA.
I haven't had one of my Luna's out in a good long while. Topped with a Van & Del Design Soul S RDA.
After today’s mail I’m now four deep on reviews to write.
So far I’m not crazy about the Meson with dual coils. I’m not getting a dry hit per se but it’s not saturated. I’m going to try a single 3mm coil next time. I’m not big on mesh but at some point I’ll probably try the mesh deck on it too.
So far I’m not crazy about the Meson with dual coils. I’m not getting a dry hit per se but it’s not saturated. I’m going to try a single 3mm coil next time. I’m not big on mesh but at some point I’ll probably try the mesh deck on it too.
Oh, I will be so happy if it was he!Remember Eskie???
View attachment 993636
He was last logged in on 4 June 2020. His last post.
Last week between 3/27 and 4/2 someone logged into his ECF account.
I just left him, or whoever logged in, a message. Hopefully I'll get a reply.
Hope it's him. We looked pretty hard at the time he disappeared. If it is, I'm sure @NolaMel will be keen to know.Remember Eskie???
View attachment 993636
He was last logged in on 4 June 2020. His last post.
Last week between 3/27 and 4/2 someone logged into his ECF account.
I just left him, or whoever logged in, a message. Hopefully I'll get a reply.
Thanks for the heads up J.
I so miss Eskie.Remember Eskie???
View attachment 993636
He was last logged in on 4 June 2020. His last post.
Last week between 3/27 and 4/2 someone logged into his ECF account.
I just left him, or whoever logged in, a message. Hopefully I'll get a reply.
Morning shinies 
I did some shopping, but it's not very exciting. I ordered some Nautilus 0.3ohm and 0.7ohm coils for my Boxx bridge tank. And a lost vape UB Pro pod tank for my UB Pro RBA. I've always used this in my Ursa, but it will be good being able to stick it in a tank on any mod.
I miss Eskie too
Especially how he kept @Letitia in line!
I did some shopping, but it's not very exciting. I ordered some Nautilus 0.3ohm and 0.7ohm coils for my Boxx bridge tank. And a lost vape UB Pro pod tank for my UB Pro RBA. I've always used this in my Ursa, but it will be good being able to stick it in a tank on any mod.
I miss Eskie too
Especially how he kept @Letitia in line!
Similar threads
- Locked
