The Pipeline Box SBS gets released later tonight.
It's a collaboration between Pipeline and Arcana mods. There are two versions. One features the ARC proprietary chip (99.95€), the other a DNA60 chip (169.95€).
Battery: 18650/500/350
Max diameter: 24mm
510 drop/recess: 28mm (18650) 13mm (18500)
Fire button: front
Weight: 180g
Dimensions: 24x48x76mm (18650) 61mm (18500) 48mm (18350)
Materials: anodized aluminum and SS
Optional 18500 tube as well as 18650/500 diamond cut tube.
Available at pipeline.de and vbar.it (per Marty via his SbS FB group).
It's a collaboration between Pipeline and Arcana mods. There are two versions. One features the ARC proprietary chip (99.95€), the other a DNA60 chip (169.95€).
Battery: 18650/500/350
Max diameter: 24mm
510 drop/recess: 28mm (18650) 13mm (18500)
Fire button: front
Weight: 180g
Dimensions: 24x48x76mm (18650) 61mm (18500) 48mm (18350)
Materials: anodized aluminum and SS
Optional 18500 tube as well as 18650/500 diamond cut tube.
Available at pipeline.de and vbar.it (per Marty via his SbS FB group).
Morning shinies 
Vapemail!!!
First impressions: Wow.
I tried it out when it arrived yesterday with just a GTX bridge and I've been running it with a Qbix since then. Handfeel is perfect. It's curvy and every side is rounded. The button is in the right place and I can easily hold and fire without blocking the airflow slots. It's a lot lighter in weight than I expected and that adds to its handfeel. The airflow is really smooth and it seems to have plenty of it.
I'm going to build the Age/Qbix next. So far the new chip is awesome - I like that it has the wattage boost options.
Vapemail!!!
First impressions: Wow.
I tried it out when it arrived yesterday with just a GTX bridge and I've been running it with a Qbix since then. Handfeel is perfect. It's curvy and every side is rounded. The button is in the right place and I can easily hold and fire without blocking the airflow slots. It's a lot lighter in weight than I expected and that adds to its handfeel. The airflow is really smooth and it seems to have plenty of it.
I'm going to build the Age/Qbix next. So far the new chip is awesome - I like that it has the wattage boost options.
WOW, this beauty has exploding flavor....for a tiny wee coil. Light as a feather to.
Meet my new goingtotown companion.
Meet my new goingtotown companion.
OMG i get to say it!!
Vapemail
Lol
Got my blaze rba, all they had was gold by the time i pulled the trigger.
Also a cheap lil boro for the fun of it. No restriction to the airflow on the blaze with this one.
Only like an hour so far but so far so good.
Vapemail
Lol
Got my blaze rba, all they had was gold by the time i pulled the trigger.
Also a cheap lil boro for the fun of it. No restriction to the airflow on the blaze with this one.
Only like an hour so far but so far so good.
Attachments
Last edited:
You all have way too many new toys. 
I'll stay stuck in the past with the good old HohmTech Slice and Kayfun V4. Taken in the basement for your maximum viewing pleasure.
I'll stay stuck in the past with the good old HohmTech Slice and Kayfun V4. Taken in the basement for your maximum viewing pleasure.
Good to see you! Love the mug.You all have way too many new toys.
I'll stay stuck in the past with the good old HohmTech Slice and Kayfun V4. Taken in the basement for your maximum viewing pleasure.
View attachment 1007223
Mine's been going strong for many years now, except slot 1 no longer works. Everything from 21700's to tiny AAA.Morning shinies
It's been on my wantlist forever, so I ordered a miboxer c4-12 charger.
Good evening Shinies
This forum lead me to some nice RBAs (among many other things of course). I'm grateful for that, and I've been enjoying them all.
The Brunhilde MTL RTA has impressed me so far. Unlike the others, there's nothing I can really find fault with. Great flavor. Excellent airflow control and build deck. The steel rods wick like a beast. Smooth draw, great capacity. Even filling is easy enough after getting the hang of it. Would be ideal if the airflow pins could be removed with a build intact, but it's not an issue of any significance. I do feel like I have to be mindful to tip it fully to aid in wicking, but in reality it's probably unnecessary.
I should grab a couple more next time I order hardware (especially considering they're being discontinued in some regions).
Thanks again @Daniel Forsyth for the recommendation
This forum lead me to some nice RBAs (among many other things of course). I'm grateful for that, and I've been enjoying them all.
The Brunhilde MTL RTA has impressed me so far. Unlike the others, there's nothing I can really find fault with. Great flavor. Excellent airflow control and build deck. The steel rods wick like a beast. Smooth draw, great capacity. Even filling is easy enough after getting the hang of it. Would be ideal if the airflow pins could be removed with a build intact, but it's not an issue of any significance. I do feel like I have to be mindful to tip it fully to aid in wicking, but in reality it's probably unnecessary.
I should grab a couple more next time I order hardware (especially considering they're being discontinued in some regions).
Thanks again @Daniel Forsyth for the recommendation
It's great to hear you're enjoying your Brunhilde so much Mate!!Good evening Shinies
This forum lead me to some nice RBAs (among many other things of course). I'm grateful for that, and I've been enjoying them all.
The Brunhilde MTL RTA has impressed me so far. Unlike the others, there's nothing I can really find fault with. Great flavor. Excellent airflow control and build deck. The steel rods wick like a beast. Smooth draw, great capacity. Even filling is easy enough after getting the hang of it. Would be ideal if the airflow pins could be removed with a build intact, but it's not an issue of any significance. I do feel like I have to be mindful to tip it fully to aid in wicking, but in reality it's probably unnecessary.
I should grab a couple more next time I order hardware (especially considering they're being discontinued in some regions).
Thanks again @Daniel Forsyth for the recommendation
As you mentioned there the SS rods wick like a beast and I definitely can't argue there!! So as far as needing to tip the tank to aid in the wicking you really don't need to in my opinion! One thing I always do and I've found that it does help with the wicking is be generous with the amount of wick that that I use and make sure it's nice and fluffy
When you're ready to grab yourself some more goodies have a look at Sourcemore and check out the Brunhilde MTL RTA situation, that's the cheapest place that I've come across and they get more in stock often! Vapefly Brunhilde MTL RTA 23mm 5ml Rebuildable Tank Atomizer
So that's officially one more now that I've got to jump on the Brunhilde Bandwagon!! Next victim... I'm comin' for you @Pigs
Thanks for the reply, that's a big help.It's great to hear you're enjoying your Brunhilde so much Mate!!
As you mentioned there the SS rods wick like a beast and I definitely can't argue there!! So as far as needing to tip the tank to aid in the wicking you really don't need to in my opinion! One thing I always do and I've found that it does help with the wicking is be generous with the amount of wick that that I use and make sure it's nice and fluffy
When you're ready to grab yourself some more goodies have a look at Sourcemore and check out the Brunhilde MTL RTA situation, that's the cheapest place that I've come across and they get more in stock often! Vapefly Brunhilde MTL RTA 23mm 5ml Rebuildable Tank Atomizer
So that's officially one more now that I've got to jump on the Brunhilde Bandwagon!! Next victim... I'm comin' for you @Pigs
I won't concern myself too much about tipping it fully then.
Appreciate you taking the time to upload a pic of your wicking. It looks like I need to add a touch more cotton and fluff it more generously. I'll definitely bookmark that.
My pleasure I'm always here if you have any further questions regarding Brunhilde!
Do keep in mind as well that you will always get a slight tip naturally when vaping and fluff the crap out of the wick it does help a lot, here's a recent fluffy wick ready to plonk in
mmmmm fluffy just how she likes it 
Good afternoon shinies,
I make shopping lists, hooray, 2 or 3 which are mostly project based.
The package from Vape & Make has moved lightning fast, DHL Int. to the Norwegian Post, has already passed through the customs authorities, clearly set a favorable price, hurray hurray. Will not be afraid to order from them again.
Now, 2FDeal hasn't shipped yet, are they always this slow?
Sunbox, zero response. Reasons why I do not recommend that company to anyone.
I'm following the price of this little thing, I've seen it down to $350, now it's $450. It's a mini mill that I will be using to mill mod shells for my projects. I plan to read up on the subject of ceramic clear coat as well...
Can soon build a new building on my farm so that everything can fit lol
I make shopping lists, hooray, 2 or 3 which are mostly project based.
The package from Vape & Make has moved lightning fast, DHL Int. to the Norwegian Post, has already passed through the customs authorities, clearly set a favorable price, hurray hurray. Will not be afraid to order from them again.
Now, 2FDeal hasn't shipped yet, are they always this slow?
Sunbox, zero response. Reasons why I do not recommend that company to anyone.
I'm following the price of this little thing, I've seen it down to $350, now it's $450. It's a mini mill that I will be using to mill mod shells for my projects. I plan to read up on the subject of ceramic clear coat as well...
Can soon build a new building on my farm so that everything can fit lol
That's a nice looking little mill Tor! I reckon you'll be able to make some lovely stabwood mods for me with that
Thanks a lot Daniel, yep I think this one will do the job.That's a nice looking little mill Tor! I reckon you'll be able to make some lovely stabwood mods for me with that
When I get inside this, who knows, maybe a stabwood goes south
Similar threads
- Locked
