Svoemesto Kayfun Mini V3
- Thread starter Bronze
- Start date
- th_trl_thread_readers 0
- Status
After constantly using for two weeks, all I can say - this atty is awesome. Not a single issue to report.
This exactly what I got. My calipers don't go to the second decimal, so mine kinda rounded up there.
Sent from my SM-N920V using Tapatalk
Got a mini for my wife two weeks ago. It's set up with a 2.5mm 28 gage Kanthal contact coil, 8 wraps and running about 1.5 ohm. It's wicked with KGD, as snug as I could make it without stripping fibers off the cotton. The tails are trimmed by about 25% so as not to crowd the juice cups.
Excellent flavor, good draw, doesn't leak and wicks great when I remember to open the juice control after filling... I forgot that detail one day and she had to go a whole night at work without vapes after the juice in the wick was used up.
I'm considering making an open coil, same diameter and gage, but the head's pretty narrow so it would need to be 5 or 6 wraps. Anyone running something similar?
Excellent flavor, good draw, doesn't leak and wicks great when I remember to open the juice control after filling... I forgot that detail one day and she had to go a whole night at work without vapes after the juice in the wick was used up.
I'm considering making an open coil, same diameter and gage, but the head's pretty narrow so it would need to be 5 or 6 wraps. Anyone running something similar?
My calipers have been a little wiggy lately too. The screen flashes on and off. The numbers kind of change on their own, etc..Thanks for the heads up.
My calipers have been a little wiggy lately too. The screen flashes on and off. The numbers kind of change on their own, etc..
And you can send pingy $30.00 for your failed measuring device. Yes you can!
I'm 100% confident I measured MY P3/KM3 accurately. Can't speak for your P3/KM3 or how accurate Captivape machines their flowring.
. Can't speak for your P3/KM3 or how accurate Captivape machines their flowring.
I have the special edition KM3. It's a 22mm with a 6ml tank. Oh wrong thread. Yup my P3/KM3 is the same as yours. Captivape farms them out to be made so I'll assume they are very accurate considering all the sizes they can machine.
You are sounding like a politician by passing the buck to Captivape.
Sounds like your enjoying it. One thing i try to do is definitely use enough wicking material but you don't want to use to much either. I like that you reduced tails slightly but when you say you wicked it as snug as possible without pulling fibers, make it sound like it could be to much. Honestly you know better because your doing the wicking and I'm sure you are doing it correctly. What I try to do, is to use the minimal amount without it being to little. If one doesn't want to teeter with this perfect balance, then slightly more wicking material is better but if one can find the "just enough" amount, the results are awesome... most of the time (at least in the wattage range I vape at, 24ish average) I know this perfect amount by obviously trial and error and just alot of time and rebuilding but also by sound. For sure I can always tell I have insufficient material when I hear a prolonged afterburn sound. If I hear a hissing sound continuing like almost 2 seconds after releasing the fire button, I know I need more cotton. Likewise if I absolutely hear no hissing at all, it's usually to much....
Sent from my SCH-I545 using Tapatalk
With the juice I'm using in the Mini and the way I vape I found I prefer a spaced coil so far... because the deck is small you can't have too many wraps if it's spaced. I found that 6 wraps worked better than 7, I'm using 26 ga N80, 3mm ID, came out to .7 ohm. Excellent vape and excellent flavor! I'm going thru 3-4 tanks a day, it's just so f'ing good!!!
new buddy for my KM3:
scored myself a "Sbody Spirit" for 79 EUR this week and just received it. it's sporting an authentic DNA40.
never heard of this mod before (and it was the last one in stock, so I _had to_ jump), looks similar to VS SBODY Macro. maybe the manufacturer of mine is producing for VS? The dimensions seem identical, don't know if it has "ZIP-charging" yet. the DNA40 sure looks and feels authentic, shows the serial and "genuine" when holding the power down button.
anyway, it looks excellent with the KM3 imho. I like
Got the plastic AFC screws for the KM3 as well. I like them so far, no "auto-disadjusting" and a more silent vape. But then again, only 1 hour into testing both - screw and mod
scored myself a "Sbody Spirit" for 79 EUR this week and just received it. it's sporting an authentic DNA40.
never heard of this mod before (and it was the last one in stock, so I _had to_ jump), looks similar to VS SBODY Macro. maybe the manufacturer of mine is producing for VS? The dimensions seem identical, don't know if it has "ZIP-charging" yet. the DNA40 sure looks and feels authentic, shows the serial and "genuine" when holding the power down button.
anyway, it looks excellent with the KM3 imho. I like
Got the plastic AFC screws for the KM3 as well. I like them so far, no "auto-disadjusting" and a more silent vape. But then again, only 1 hour into testing both - screw and mod
FLAVOR (chaser) UPDATE: I used a chinese pre-fab clapton (with core) inside it and that thing is just a tad too huge to install. Guess what though? Zero problems with the installation, firing and wicking. This is hands-down the most flavor I have gotten out of anything, super happy with the new kayfun mini.
My wife stole my km3 again. I packed to go out of town. I'll be gone for a month or 2. I drove 5 hours to the hotel. I was using a reo/stumpy and a Radius with a Squape RS for the trip. When I got to my room and unpacked, I was looking forward to using the km3 for a while. There it was....right there in my box. A picture of my lovely and talented wife holding a Radius with the km3. What's worse was the evil smile....Why do I continue to underestimate this woman?
- Status
