Tank-O-Matic Liquinator v4.1
- Thread starter Wylie
- Start date
- th_trl_thread_readers 0
- Status
Thanks, I saw those. Ikenvape has the stealth adapter as well but the disclaimer states that they are not compatible with Fusions. I didn't know if anyone is using any stealth 510-801 adapter that can verify it works for sure...
I ordered a SS liquinator last week. I'm hoping to get it soon, apparently there is a wait time for them...
I ordered a SS liquinator late Friday night, and my order shipped this afternoon....so hopefully yours is already on its way
I ordered one 2 weeks ago and it came within 5 days! I live in So Cal. San Diego! I also ordered another derlin one too! I have to admit they are a better tightness than the ones I ordered some time ago. I never had a problem with my other ones ( I think they were the 2nd phase.) these are much tighter and still easy to refill. I think people are having problems with these as they may be filling them up wrong. I've never had a leak problem at all... I cut my own cartos too!!!
Enjoy everyone!
I'm happy with the old product and new product. I'm not getting 2 weeks on these! as I'm a chain vapor! I am getting 12-15 refills on these. I think we all need to talk about how many refills instead of how many days! I am using the boge lr's with a 60/40 555 menthol dark in color liquid. Loving these...
On a side note I also received a dccmap tank and have not tried it yet but it slides the same as the liquinator!!!
Love you guys ------- enjoy! I need to find a pipe that fits these ---- good bye!
Yer.. I lose count of the refills.. I guess I get around the 7 to 10 refill mark using the 3.5ml Liquinator.. I'm at that point now and things are starting to taste a little watery.. not too bad.. but enough to start thinking about a change. The DC carto is also not crackling as much as I was yesterday (or the first day even).. so another sign it needs changing even though it is still got good vapour. Most of the time I have around the 80/20 to 90/10 ratio (PG/VG).. like I might get a 80/20 doubler (0mg nic) and mix it with PG based niquid at about 3 parts doubler, 1 part niquid.. so around the 80 to 90% PG mark I am guessing.
Last edited:
I ordered 510 t0 801 shorty adapter from madvapes and it works great. Don't know if it is stealth but it sure looks like it.
have 3 of them that use with my fusions so they work for sure
In that video, I think the biggest problem with the instructions is the lubing the o-rings. They need to be almost dry to prevent them from sliding around to easily. It may make them a little hard to put together but they wont slide apart. My Map tanks are not lubed at all and wont fall apart.
It's been 7 days since I ordered mine, just checked the mail and no joy. Maybe tomorrow.
Hi Happy Vapors
I just want to up date the results for the punched carto I been using. I'm on my 4th day with it ( new record) and still no leaks(ie out the post) On the 4th refill I did get a slight gurgle for a few drags, but it cleared right up. Also I have found out that filling from the bottom is best. If you fill from the top it seems to want to flood a bit more. never remove the top plug to fill as soon as you put it back on, and push it down it pressurizes the tank and pushes liquid into the carto which floods it. I have been unable to find any 2.5 ohm mega(XL) cartos so ordered some more 1.7 ohm resurrector cartos from CCV. I hope they work as good. I can't run them above about 3.6-3.7 on the Provaris but that is doable, that is still 8 watts.
Vape On
CH
I just want to up date the results for the punched carto I been using. I'm on my 4th day with it ( new record) and still no leaks(ie out the post) On the 4th refill I did get a slight gurgle for a few drags, but it cleared right up. Also I have found out that filling from the bottom is best. If you fill from the top it seems to want to flood a bit more. never remove the top plug to fill as soon as you put it back on, and push it down it pressurizes the tank and pushes liquid into the carto which floods it. I have been unable to find any 2.5 ohm mega(XL) cartos so ordered some more 1.7 ohm resurrector cartos from CCV. I hope they work as good. I can't run them above about 3.6-3.7 on the Provaris but that is doable, that is still 8 watts.
Vape On
CH
how do you stop it from leaking through the bottom hole of the carto after filling??
If they really meter at 1.7 ohm, you should be able to use them on the ProVari at 4.2V with no problems. Some may come in higher and meter at 1.8 ohm which will enable you to go up to 4.5 if you want to go that high...
I ve never had the Resurrector Cartos before, but the 1.5 DC cartos drop from their initial resistance by about .2 ohms one I had that failed fairly quick, it was 1.2 just before it failed. So yes I can start off at 4 or so but soon it gets E2 errors. I hope the resurrector is better. I was just wondering how barometric pressure affects the liquid flow. If the air in the tank is equalized say at 31.2 and the pressure drops to say 29.2 then the push on the liquid is higher in the tank than the inside of the carto which is open to the lower pressure. If the slot is covered by juice then it can't equalize. It would be wise to never fill the tank so the holes are all ways covered, and should not be stored in upright position. Right? What about the air heating up from chain vapors? I know and old retired Engineer thinking to much. LOL
Vape on
CH
Last edited:
Colorado "Smart" Man, I think you just figured out whats causing the leaks. Barometric pressure and the pressure increase from temperature could cause a large enough difference to Push/Pull the liquid. My egoT leaked every time i left it in the car and it was hot. Same principal here, but increased volume in every factor. The less noticeable effect would be starving the tank caused by increase in environmental pressure. We would most likely pass that off as juice/slots/hole/carto/user error. When it leaks we blame slots/hole/carto/someone else, but none that i have seen question environment until you sir. I say valid argument. Engineers are great!
edit: possible solution to a flooding situation, equalize the pressure inside the tank to the surrounding environment. I'm thinking a valve (like in combustion engine) held tight with a spring just like in a car engine. With a push button to open the valve in emergency situations rather it be too wet or dry. Maybe dual as a filling spout.
edit: possible solution to a flooding situation, equalize the pressure inside the tank to the surrounding environment. I'm thinking a valve (like in combustion engine) held tight with a spring just like in a car engine. With a push button to open the valve in emergency situations rather it be too wet or dry. Maybe dual as a filling spout.
Last edited:
Colorado man: yes fully agree as I had stated this in "simple" words as well:
http://www.e-cigarette-forum.com/fo...-matic-liquinator-v4-1-a-206.html#post3900891
point 3:
3.) when putting on the drip tip don't close the drip tip hole or the atty hole as you will push too much liquid in the carto and flood it;
http://www.e-cigarette-forum.com/fo...-matic-liquinator-v4-1-a-206.html#post3900891
point 3:
3.) when putting on the drip tip don't close the drip tip hole or the atty hole as you will push too much liquid in the carto and flood it;
- Status
Similar threads
