what above post? it kinda sucks though that you have to reverse engineer something that you pay money for for it to work properly, it always seems to be something simple yet not completely that goes wrong. i cut the inner nipple off of one of my ce2s and it seems to be working great, i tried it with some other ones and they still get the burt plastic/ silicone taste =[ why is it so hard for me to find something that will just work for me?
- Status
its kind of a bummer that filler-less cartos are so fiddly. it seems i am always resorting back to boge cartos after trying something new and shiny. for some reason they just havent worked out of the box. the new ce2's give a great vape for me but not without modding them one way or another, and to me that s a bummer. i did order a ce8, phoenix 3ml and the smaller one, also i ordered the nova tank.....as much as i would like to think one of them will work out of the box, i guess i shouldnt expect too much. but i have to say i am a bit excited about tomorrows mail 
ive thought of the nova tank, i just dont really like the look of it, and possibly the size. i have a lavatube so i didnt want anything thats wider than that. let me know how your nova tank works out.
i just like the taste of the ce2s, just not the fiddlyness of them. im not a fan of cartos because of the filler taste. i guess at some point ill just have to compromise.
after 3 revisions they are burning silicone and wont wick well. makes you wonder if they even try these things before shipping it to the masses. arent those the first 2 things they should look for? (besides leaking)
Couldn't agree more that it would be nice for something to just "work" once in a while.
Starts to feel like we're becoming the paying test bed for some of these things.
Everyone provides feedback, some changes are made, they get better (still not great), and by that time, there's something completely new that promises to be the "best" rendering the previous lines obsolete, and they become forgotten.
Also always seems to be that the liquid is to blame...
Different versions with different ohm ratings are typically available, why not different versions for liquid viscosity as well? Thin / thick liquid versions??
That being said, my revised C8's and ViVi Nova should arrive today, if they prove disappointing, I think it will be time to sit on the sidelines for a while and stick with carto's / atty's.
They may not be the best, but they're consistant overall...
(steps off soapbox)
Starts to feel like we're becoming the paying test bed for some of these things.
Everyone provides feedback, some changes are made, they get better (still not great), and by that time, there's something completely new that promises to be the "best" rendering the previous lines obsolete, and they become forgotten.
Also always seems to be that the liquid is to blame...
Different versions with different ohm ratings are typically available, why not different versions for liquid viscosity as well? Thin / thick liquid versions??
That being said, my revised C8's and ViVi Nova should arrive today, if they prove disappointing, I think it will be time to sit on the sidelines for a while and stick with carto's / atty's.
They may not be the best, but they're consistant overall...
(steps off soapbox)
I know right? My question is, why does gotvapes sell these if they know they have problems? Why did they advertise needle free filling if that doesn't even work? Why didn't they advertise these straightforward, saying you need to mod the seal and fill with a needle. I don't mind modding them. It's the false advertising that severely pisses me off. Badkolo, you get a wag of the finger from me.
We shouldn't have to pay to develop the product. It's ridiculous, and I find it insulting.
Not to mention they didn't even fix the problems we had with the deluxe. They ignored us and created more problems. We can blame MiT for that, but, we have to blame gotvapes for selling them to us.
Last edited by a moderator:
They are here!! GotVapes FLuXomizer SUPREME CLEAR 510 REG .9ml 2.4-2.6ohm First impressions:
I'll write more as the day goes by, but so far I am super happy...except that I asked GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more about the cone issue and they said that it shouldn't be an issue...it is
- They are super easy to fill. I just dripped along the side, 50/50 juice, without removing anything at all and the thing filled up like a champ! I see no signs of leakage from the top or the bottom and I filled them to the top.
- The vapor, at 3.7 volts is perfect, but the TH is a little light. Might be the new juice I am trying, however. I will place the same juice in a 1.7 XL carto later tonight to see
- Flavor is definitely there. One major difference is that I am not getting any juice in my mouth. On the 1.7s, even with a drip tip, I always end up pulling some juice in my mouth, not with these so far...
- ...... that my stock cone, from my e-power 14650, does not fit on with these. I now I have an ugly looking PV.
- Love the shorter size, once I figure out the cone situation, I can see this carrying in the pocket with ease.
- I can now see the juice perfectly. No guessing on how much is in there
I'll write more as the day goes by, but so far I am super happy...except that I asked GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more about the cone issue and they said that it shouldn't be an issue...it is
I have filled 2 of these so far and both taste really good. I am thinking, however, that a resurrector most likely has a little more flavor, but the ease of use will overcome this (extra flavor is all it needs).
Only issue I have seen with the first 45 minutes is that the one that I had sitting on the counter, while I was vaping the second one, flooded the atomizer and I got huge gargles and some juice in my mouth, so scratch number 3 from my previous post.
Only issue I have seen with the first 45 minutes is that the one that I had sitting on the counter, while I was vaping the second one, flooded the atomizer and I got huge gargles and some juice in my mouth, so scratch number 3 from my previous post.
I almost vaped one empty (remember that I got the regularts), so I figured I would refill. I have to say that the refilling is not going well. The juice is now not going through the 2 slits and is just sitting in the little channel up top...not sure why this is. Also, my blunt tip syringe is not small enough to fit into the slit so I cannot use that either...sigh...
The flavor was consistent all the way to the end, however.
The flavor was consistent all the way to the end, however.
Just a guess as I haven't tried these yet, but is it possible that when you were trying to refill, the fluxomizer was screwed into your PV and not enough air could get in(or out actually) from below creating a vacuum inside so the liquid couldn't flow down into the carto very easily?
It is definitely an issue with airflow, however the carto was not on the PV. In order for me to complete the filling, I forced a blunt tip needle down one side and stretched the tube to allow air to flow into it. This allowed me to complete the fill....after losing a mil of juice...This one is also the one that the atomizer got flooded after sitting on its side, so I think it might have an issue. I'll test another one with the filling once I complete my orange cream...yuumm..
when you are filling the side the juice in not going in must be completely open and not have a drop of juice in it otherwise it will get airlocked. same thing can happen on the regular size visions too. before you fill it perhaps try blowing some air in with a syringe or a couple of flicks tward the battery connector. you should be able to tell by looking if the space is filled with juice and air can get past or not.
hope this helps
hope this helps
I dunno, I guess I'm in the minority. I love these things. I've always filled CE2s with syringes and 20ga needles, whether I've removed the seals or not. The only time I ever have a problem with them is when I try to vape them too soon after filling. They need a good 10 minutes or so to make sure the wicks are saturated. I use 70PG/30VG juice.
Venting!
I just received my 5 pk. of fluxomizer 808,s. Not Happy! No instructions on how to fill with my order. The videos on the gotvapes site was unless. I followed the simple directions on the forums and what info was available on their site. I used a syringe and the fist one was dry no flow. The second one was burnt after 3 hits. Juice everywhere, messy and frustrated! The third one same thing,,,terrible burnt taste. I was cafeful NOT to push the rubber tip to far into the cart! Put on the drip tip I got from these guys and now I am waiting on my 4th one to sit for a while. It seems like a no brainer to fill these baby's but there is clearly something wrong!
I just received my 5 pk. of fluxomizer 808,s. Not Happy! No instructions on how to fill with my order. The videos on the gotvapes site was unless. I followed the simple directions on the forums and what info was available on their site. I used a syringe and the fist one was dry no flow. The second one was burnt after 3 hits. Juice everywhere, messy and frustrated! The third one same thing,,,terrible burnt taste. I was cafeful NOT to push the rubber tip to far into the cart! Put on the drip tip I got from these guys and now I am waiting on my 4th one to sit for a while. It seems like a no brainer to fill these baby's but there is clearly something wrong!
- Status
Similar threads
- Locked
- Locked
- Locked
