tube juice feeding???

[Scubabatdan]

and the modding award winner is... Mr scubabatDan!!!!
you master in anything you do! but if i was to pick one of yours infinite gift on the ecig art i'd pick the liquid DIY! (my trials are zie worst)
can i have that lil fat one?
can you make another video?

Why does eveyone want my lil fat one Whoooo I just read that....
What video do you want? making or usage?
Man the little guy rocks! I wound a 3.0ohm coil in there and on a riva it is heaven, 10 wraps of 34ga nichrome around 2 strands of silica on a needle.
Dan

 

[misterD]

i wanna see your lil fat one in action!!!
dripping, filling, vaping!y
i'd like to have the skills to build a FOBatty with little eye glasses screws to have the wick solderless like the bulli A1.
great job, Dan!

 

[asdaq]

Yeah the big one reminds me of an AFS too. The little fat one isn't such a sharp contrast in size to the mouthpiece-- hurrah on all accounts though

 

[Scubabatdan]

i wanna see your lil fat one in action!!!
dripping, filling, vaping!y
i'd like to have the skills to build a FOBatty with little eye glasses screws to have the wick solderless like the bulli A1.
great job, Dan!

For MisterD:



Hope you like it,
Dan

 

[Bubo]

Jees - this is moving way too fast for mere mortals to keep up with!
On the bright side, this is looking like what I wanted to make, a homemade atty, reservoir and a battery... I am go ing to have to study this when I get a chance.... (Of course, by then - it'll be nuclear powered... btw, what happened to your turbo fan Dan?)

 

[Bubo]

2 strands of silica on a needle.

2 STRANDS?!?!??!? Wow, I just ordered a foot of 1/2" and a foot of 1" yesterday..... I guess I will be good to go for the next billion years...

 

[roadrash]

2 STRANDS?!?!??!? Wow, I just ordered a foot of 1/2" and a foot of 1" yesterday..... I guess I will be good to go for the next billion years...

Bubo, Guess you will have plenty to share.

 

[CloudBurst]

Well, finally got mine working (the atty, at least) I can't seem to get the juice flowing like it should! Any suggestions? Other than that, which is pretty important, I like it!

 

[Scubabatdan]

Well, finally got mine working (the atty, at least) I can't seem to get the juice flowing like it should! Any suggestions? Other than that, which is pretty important, I like it!

Sent you a PM...

 

[CloudBurst]

I think I got it! Thanks Dan! It's not the flavor I was looking for but it does work!

 

[Scubabatdan]

Jees - this is moving way too fast for mere mortals to keep up with!
On the bright side, this is looking like what I wanted to make, a homemade atty, reservoir and a battery... I am go ing to have to study this when I get a chance.... (Of course, by then - it'll be nuclear powered... btw, what happened to your turbo fan Dan?)

Still have it, havent made the fan for the motor yet, too many projects
Dan

 

[misterD]

thank you, Dan! im not sure i got how you did it.
you using 2 top fobs than you use the threads only of the bottom/body and connect them both together?

 

[Scubabatdan]

thank you, Dan! im not sure i got how you did it.
you using 2 top fobs than you use the threads only of the bottom/body and connect them both together?

This diagram help to explain?
And how about this nice coil job
Dan

 

[FlyerTom]

SOMEBODY around here is buying up all the pill fobs...
Visits to 3 CVS pharmas in my area resulted in nada.
Who's hoarding?

 

[asdaq]

Dan, I'm curious how this compares in performance to your big cartomizer mod? The XL ego cartos I hear, run dry even though there is still juice in the filler. Also your most recent setup seems just a step away from something where the wick from the coil runs down into a reservoir of juice, not so unlike a larger version of a e2 carto...

 

[Scubabatdan]

SOMEBODY around here is buying up all the pill fobs...
Visits to 3 CVS pharmas in my area resulted in nada.
Who's hoarding?

ME ME ME!!! Oh Wait I am in Alabama, but I am still hoarding

Dan, I'm curious how this compares in performance to your big cartomizer mod? The XL ego cartos I hear, run dry even though there is still juice in the filler. Also your most recent setup seems just a step away from something where the wick from the coil runs down into a reservoir of juice, not so unlike a larger version of a e2 carto...

As far performance I noticed two advantages, one, no batting/filler, I am not getting the burnt taste associated with cartos. Two, when vapor falls off slightly I simple inhale a little harder and vapor production is restored. In the large carto mod I feel the juice does not wick fast enough to refill the heating coil there are times where you have to wait for replenishment of juice to the coil, in the tube juice feeder I can control that. In the hybrid I made where the resivor is above the coil like the buli, vapor is good but seems "cool" with the atomizer above the tube juice feeder the vapor is warmer and the space where the wick is coiled is very close to the coil making replenishemt faster. With this I can control the flow of juice through inhalation, even with a stock 510 connected with a blank cartrige vapor is awesome.
This make any sense?
Dan

 

[asdaq]

Totally does, thanks much. I think I missed your hybrid mod completely :/

Something told me this has more legs to it than just a better e2 revision

My own latest incarnation is even better too- very relaxed in getting it to flow and it backs off much more nicely too.

cheers,

asdaq

 

[RippleInStillWater]

Just so you know, the SuckaTon fans like me read the updates every day (since I'm not mechanically inclined this is as close as I can get!) -- if anyone wants to trade a beta (and get an outside opinion) for anything DIY I have or can make, np, my men!!!! misterD, Dan, asdaq, you guys are both innovative and funny!

 

[Bubo]

2 STRANDS?!?!??!? Wow, I just ordered a foot of 1/2" and a foot of 1" yesterday..... I guess I will be good to go for the next billion years...

Ooooops...
Guess what just showed up today.......

 

[roadrash]

Ooooops...
Guess what just showed up today.......

Looks like a 120 volt attie in the makins.