UD Goblin Mini v3

[jjatl]

Not much in the way of pics in here. Here we go.
Boxed.

What you get. Orings, post screws, an extra 510 pin, hex wrench, two glass sleeves, single coil deck, and dual coil deck.

To switch out the decks from the base, unscrew the 510 pin.

The decks are fairly small but built great.

Airflow slots on the bottom of the base. Controlled by a lever.

The bottom of each deck has nubs that fit into the base.

Jfc markings on the base. Turn counter clockwise to close.

Dual ss316l, 3mm 8wrap spaced. .26cold

Blub, blub, blub.

Great looking spaced coils!!! Thanks for the pics!

 

[jjatl]

**duplicate post

 

[Beeker25]

Is it just patience and time to get the coils spaced that accurately? I don't even try....use the coil master jig and wind tightly so I can be done with it relatively quickly.

 

[Eskie]

No problem! Vapes very nice. Also included is a spit back protector, which I didn't use. No spitback here.

@ricks @Eskie @hittman @Vinnybagodoughnuts
See the above posts. I'd get one or two of these fellas.

Great photos and glad to see it in real life. Yeah, that does looks sweet. Time to place an order. It's only money, right?

 

[MMW]

1. Can a 4mm (or even 5mm) coil fit nicely on the single coil deck?
2. How is the airflow (max it) compare to Augvape Merlin (also max it)?

Hi brother. I haven't built the single coil deck yet. I will this afternoon though. The airflow for the dual deck wide open is a liitle less than the Merlins air.

 

[hittman]

No problem! Vapes very nice. Also included is a spit back protector, which I didn't use. No spitback here.

@ricks @Eskie @hittman @Vinnybagodoughnuts
See the above posts. I'd get one or two of these fellas.[/QUOTe

Thanks for the tag. This looks like a really nice tank. I already have a crius and crius plus on the way but I'm going to start keeping an eye out for a good price on one of these.

 

[Vinnybagodoughnuts]

Me too! I am a cheapskate!

 

[hiclass]

Hi brother. I haven't built the single coil deck yet. I will this afternoon though. The airflow for the dual deck wide open is a liitle less than the Merlins air.

Can you measure the distance between the two posts of the single deck? (post hole to post hole).

 

[MMW]

@hiclass
4mm.

 

[MMW]

I wouldn't go any bigger and you'll have to thin the tails significantly for the wick ports.

 

[hiclass]

I wouldn't go any bigger

My concern is whether I can plug a notch coil on this deck. e.g. the one come in the Merlin box, its diameter is definitely > 4mm. I will be grateful if you can take a aerial view picture of your 4mm coil on this deck.

you'll have to thin the tails significantly for the wick ports.

Why?

 

[MMW]

4mm coil will take a lot of cotton. Too much for the wicking channel.

 

[hiclass]

4mm coil will take a lot of cotton. Too much for the wicking channel.

OK, I see the reason.

In my case, I always prefer bigger airflow and bigger coil with more cotton to ensure sufficient juice supply otherwise I will have to concern about wicking method which is able to supply juice prompt enough.

 

[Fozzy71]

OK, I see the reason.

In my case, I always prefer bigger airflow and bigger coil with more cotton to ensure sufficient juice supply otherwise I will have to concern about wicking method which is able to supply juice prompt enough.

rayon

 

[Mactavish]

rayon

Indeed. I looked at the notch in the GM3, and it seemed too big, more wicking then the juice channels would support even with thinning. Went with 2.5mm, rayon, and still thinned the wick ends. Flowing fine.

 

[dd4285]

Thanks @MMW for the great in depth photos and review. Great looking tank.. Btw, is there any comparison review made on GMV3 with Serpent Mini 25? I'm looking forward for short tank multi build deck system.. might order both though.. lol.. havin a blast currently with the 22mm serpent mini, but when UD decide to came out with the GM V3, it ticks the right boxes for me.. not a fan of the V1 and V2 though..

 

[Canadian_Vaper]

I kind of want to order 3 more extension tubes to make it a 10ml tank (already have one)...

Screw it I want to order 20 more and make a monster lol..

 

[hiclass]

I kind of want to order 3 more extension tubes to make it a 10ml tank (already have one)...

Screw it I want to order 20 more and make a monster lol..

Good imagination

 

[Canadian_Vaper]

Good imagination

Vape/Night Stick

 

[MMW]

So far I like the dual coil better. The single, while I've only tried two builds so far is rather lackuster. I tried a 4mm spaced and a 3mm contact. I want to find a sweetspot, just haven't found it yet with the single.