VaporWerks rebuildable atomizer full specs and photos

[Mark K]

got my tracking Thanks! Sir Jherron

 

[sanjosse]

+1 on "The Super Cell" I like the idea, and would be in for 1!

ETA- just signed up on the spreadsheet via my iPhone (not sure if that impacts this or not) and saw that the questions for single or dual still seem to be backwards (first question was how many dual, with sub title of how many single hole, and visa versa). As a noob to rba's single is probably best for me, but I'll leave it to jherron for whatever he decides to go with (i.e. dealer's choice). Also, as I am quite new to RBAs, if you are still offering to wick and wrap for those poor souls with little experience, I would greatly appreciate it so that I may use your skills to learn. Thanks!!

neoexodus, Damn, I can't get ANYTHING by you members, LOL! But seriously, thanks for catching that

EDIT: Oh yeah, and I fixed it too!

 

[jherron]

Jherron the single wick set up i see 3 holes on the plate for the wick the ground and the fill hole. Is the fill hole threaded and come with screw for those that prefer it closed.

One more thing please , are you going to start making the higher capacity Stratus and if so will the glass/pyrex be an option .
Thanks

fill hole is not threaded , wicking would be an issue if it was closed .
I do have some prototypes in the works , a larger capacity atomizer , a 14500 hybrid and a 18650/18350 hybrid . and yes ill make glass an option as well

 

[jherron]

I have some gen attys with a fill hole the size of a fill tip needle. Those are the best for me, as it allows the tank the ability not to vacuum lock. The perfect world would have the other 4 holes threaded...giving the most options.

what size fill needle are you using , typically i use a 16g and the current fill hole will accept that . i can reduce the size if most people are using smaller fill needles . i would thread all the holes like that but the problem with the stratus is space , the heads on the larger machine screws to fill the wick holes would be very tight allowing absolutely no room for error in drilling and my drill press is not accurate enough for me to do so . eventually ill add more tooling and machinery to expand my offerings . This is just the beginning

 

[jherron]

Sweet..........

Mine is the middle one right?

yes sir , that is yours

 

[scoopbb]

jherron, any updates on the pyrex?

 

[Tarkvemada]

fill hole is not threaded , wicking would be an issue if it was closed .
I do have some prototypes in the works , a larger capacity atomizer , a 14500 hybrid and a 18650/18350 hybrid . and yes ill make glass an option as well

Mmmmm.. Hybrids..!!!!! It's like a music to my ears.

 

[tierrataz]

First kuddos jherron.
Second thanks AG for posting on the pit!!!!
Third, I jumped the gun and ordered prior to reading all. Now the dual is u wick ready, may I please change my order to dual?

Thanks so much.

 

[carlton M]

fill hole is not threaded , wicking would be an issue if it was closed .
I do have some prototypes in the works , a larger capacity atomizer , a 14500 hybrid and a 18650/18350 hybrid . And yes ill make glass an option as well

Must have hybrids!!!!!!!!!!!

 

[HzG8rGrl]

Placed my order and I am excited to get my first hybrid atomizer/tank. I was hoping there would be a choice for a couple dollars extra to have a few pre-made wicks thrown in the order, that way you can vape while practicing the roll/quench/burn/quench roll tighter-nope, loosen it up gotta find the sweet spot fun-lol.

 

[AlmightyGod]

First kuddos jherron.
Second thanks AG for posting on the pit!!!!
Third, I jumped the gun and ordered prior to reading all. Now the dual is u wick ready, may I please change my order to dual?

Thanks so much.

I've been running mine with a u-wick...very nice.
He's threading one of the wick holes now for the single wick user.
I think you might really like this one taz.

Must have hybrids!!!!!!!!!!!

With isolated brass center post and switch screw.

Placed my order and I am excited to get my first hybrid atomizer/tank. I was hoping there would be a choice for a couple dollars extra to have a few pre-made wicks thrown in the order, that way you can vape while practicing the roll/quench/burn/quench roll tighter-nope, loosen it up gotta find the sweet spot fun-lol.

Mr. Herron is pretty good about his CS.
He's offered to set it up the first time too.
Maybe he could add an option to buy some pre-oxidized wicks with the Stratus.

 

[HzG8rGrl]

I have watched plenty of vids and used teeny tiny pieces on a small rebuildable-no tank atomizer, but that is it-lol. I ghost your show sometimes and hope to catch you do a wick n roll-lol. The option would be nice for first timers and old timers alike. I'm pretty good at figuring all this out, once I put my mind to it.

 

[AlmightyGod]

I have watched plenty of vids and used teeny tiny pieces on a small rebuildable-no tank atomizer, but that is it-lol. I ghost your show sometimes and hope to catch you do a wick n roll-lol. The option would be nice for first timers and old timers alike. I'm pretty good at figuring all this out, once I put my mind to it.

I'll be doing one on Monday night, but you can always watch my YT channel for some good vids.
Vaping with AlmightyGod - YouTube

 

[tierrataz]

I've been running mine with a u-wick...very nice.
He's threading one of the wick holes now for the single wick user.
I think you might really like this one taz.

I'm hopeful after your comments on the pit. You know from past circles what a flavor monster I am.

 

[POSEIDON]

Your vid is the one that broke the camels back. Im in on this. I need this in life.

I'll be doing one on Monday night, but you can always watch my YT channel for some good vids.
Vaping with AlmightyGod - YouTube

 

[AlmightyGod]

I'm hopeful after your comments on the pit. You know from past circles what a flavor monster I am.

The tight draw cap is 3/64", so a little more open than some. The reduced vapor chamber is spot on though. I'm rocking a u-wick in my Stratus still, & I'm really liking it a lot. It's better for flavor than the Hellfires, IMO. I know you are a tough customer though, so I'm hoping you like it. The build quality is a no brainer, even if it turns out not to be for you. I think Mr. Herron is going to become quite popular.

 

[tierrataz]

Yep, a picky wench. ;-) I didn't care for HF at all, so no worries there. Love my Orion's & bliss has been the only equal thus far for my desires. Ive been through a lot of attys in my quest. 3/64ths is 1.19mm, I wouldn't want any larger but thinking it will be fine. Getting the chamber right is the magic IMO. Heck, there is always JB weld.

So now the wait begins.

 

[jherron]

what size would you like the air hole. I can make it smaller for you.

 

[tierrataz]

what size would you like the air hole. I can make it smaller for you.

Wow, now that is customization! 1mm is perfect for me, but do you have metric bits?

Thank you so much.

 

[jherron]

i dont typically dont keep a stock of many metric bits but on my next supply order I'll order a couple of 1mm . no problem, just remind me when I send your payment request