vision clearo preview, cause you asked for it.

[GeekyGirl36]

uuuuuggggg unfortunately we got a couple of weeks to work this out,,,,no way I can purchase anything on this paycheck
We can pm each other.
I havnt gottten my ejuices, things have come up and I had to let the sorting go for another day. But I will get it done

I understand about things coming up, don't worry and waiting a few weeks is fine; it was just an idea so we can test what we want without having to buy packs if that is the only option. GV is going to be getting my lunch money this summer, I can already see it.

 

[PattyR]

Got my Vision in the mail today. Vapes like a charm - excellent flavor and volumes of vapor! Works great on my ego battery and even better on my REOs (REO Grand, REO mini, and REO Woodvil). This puppy rocks!

 

[Shel]

Well I'm on the Visions running them hard on my Provari at 4.2v and these things are kicking some serious Azz and the flavor is very good on them. I was expecting a muted flavor like previous CE2's but that's just not there with these and there really very good in my opinion at 4.2v just really good.

Glad to hear it, because I just received dual coils, and on my ProVari they are aweful!

Not sure how well they work on other devices, but it was basically money down the drain for me.

I'm now waiting for the Vision Clear Carto, and hope it'll work much better!

(Partly my fault, guess I should have checked how well the dual coils work on a ProVari....)

Live and learn.

 

[badkolo]

glad your all liking them

 

[otrpu]

The Vision, a factory made syringe mod. Quite similar to a syringe tank. Is the CE-2 replaceable? I've vaped my first for alittle over 24 hours. I use 50/50 or > % VG Cinnamon flavor. VG seems to tend to plug coils. Cinnamon, also, seems to tend to plug coils. When the draw "tightens up" I crank up the voltage on ProVari and dry burn the crud to ash. This "lightens" the draw for awhile. If I hold PV batt high and draw, Vision floods fast. Note to self: Don't do that. Cinnamon don't taste that bad. . .but the point is to vape it. . .not drink it. When I went to sleep I take the battery out of, and the Vision off of ProVari. Throw batt on charger and place Vision in a baggie. Woke up, put batt in ProVari, and took Vision out of baggie. Found slight amount of ejuice in baggie. Maybe Vision don't leak, but where the hell did ejuice come from that was in baggie? Note to self: wipe Vision off, screw onto ProVari, vape silly head off. So far. . .I like it. Remains to be determined how long Coil lasts. Vision wicks well, tons of vapor, especially w/50/50 or > % VG liquid. All this is JMHO

Cheers,
otrpu

 

[VirusZ]

hey,I also use DC on provari, you need to get used to how to use them.
I have both metal and clear ones, for some reason clear ones are much better, the go higher on voltage and not burning.
the metal ones you should use on 3.6, 3.7, 3.8 and dont go higher, i filled a brand new one and it was burned on 3.9.
After i disassembled it, it wasn't burned much just a bit but enough to make your juice taste like burned fabric..
And the metal ones are single use, you can disassemble teh clear one and use again, even if you burn them, you just clean the burn spot, or replace the fabric that goes around the coils from used cartomizer (not the filler material)

The clear ones work fine on 4.2. on 4.3 they give errors from time to time and on 4.4 they wont fire.

We need GV to stock some HV merch many people using 5V and higher these days, I hope they make a dual coil with 2 2.0 ohm coils or 2.5 ohm coils, it will be amazing for ProVari

Glad to hear it, because I just received dual coils, and on my ProVari they are aweful!

Not sure how well they work on other devices, but it was basically money down the drain for me.

I'm now waiting for the Vision Clear Carto, and hope it'll work much better!

(Partly my fault, guess I should have checked how well the dual coils work on a ProVari....)

Live and learn.

 

[kelleymcm]

Mine is still just vapin' right along in its 5mlBD syringe housing ...
did take it apart yesterday & dry burned/cleaned it ...put it back together
...filled it back up & YaY !! good as new again ....I LOVE THIS THING !!

another note ...the maxomizer* I have been using off & on Vapes GREAT too ...it is different tho,even tho I can't quite put my finger on what's different . It is just "tighter" maybe (not as airy) ...I used the eco mod glue & ran a bead around the inside where the top of the tube is & No Leaks ...so it must have worked ???

I did find out that the glue is NOT impervious to boiling water ...just turned back to white goo, is cool tho I just re-did the glue after dryburn/cleaning ...waited till it dried . & yup it's working same as new now too.

Big Thanks to gotvapes for all my working options !!

*rereading this I decided that I should clairify that my maxomizers are the old one's that were supposed to leak, I have not seen a leak I just assumed that they would w/out glue fix .

 

[badkolo]

wow so happy kelley, yes the maximizer is great and the vision is also just wonderful and so many are emailing with great results, and yes the glue is a life saver and works just like its suppose to fro cracks and leaks but yeah it cant handle boiling water, lol, just reseal wiith more glue like you did and your good to go, keep vaping girl , you rock

 

[Shel]

So far (about all of ten minutes) loving the Vision Clearo on my ProVari! (Was supposed to arrive monday, but I got a nice surprise, and it showed up today, Saturday!)

Great flavor, no indication of leaks, and good vap production!

I'd say, if it continues to perform as it has the first ten, fifteen minutes, it's a winner!

 

[zoiDman]

So far (about all of ten minutes) loving the Vision Clearo on my ProVari! (Was supposed to arrive monday, but I got a nice surprise, and it showed up today, Saturday!)

Great flavor, no indication of leaks, and good vap production!

I'd say, if it continues to perform as it has the first ten, fifteen minutes, it's a winner!

Just curious as to what the Vision ohms were that you are using? I haven't tried one yet and was wondering how close the ohms are to what they say they are.

 

[mwa102464]

Zoid,

Mine are ohming out at 2.8-2.9

 

[zoiDman]

Zoid,

Mine are ohming out at 2.8-2.9

Thanks mwa…

For my tastes and e-Liquids, I like to vape at 5.5 watts.

√(5.5 x 2.7) = 3.85 volts.

So at that resistance it sounds like they should be fine on a an eGo. I have joined the elite group of Provari owners but like to buy Cartomizers that will also work on my non-VVPV gear.

 

[Shel]

Just curious as to what the Vision ohms were that you are using? I haven't tried one yet and was wondering how close the ohms are to what they say they are.

My ProVari shows the Vision at 2.9ohms.....

 

[Adrena]

My vision gets here and that darn usps cracked it a good 1/2in. Can I reverse this tube, maybe use a syringe? Guess I've got to replace this tube somehow any other suggestions/how to's? Not done this before...

 

[kelleymcm]

My vision gets here and that darn usps cracked it a good 1/2in. Can I reverse this tube, maybe use a syringe? Guess I've got to replace this tube somehow any other suggestions/how to's? Not done this before...

5 ml/cc BD syringe fits ,no leaks ...I did have to put some tape around mouth piece to get it to have a good fit tho ...i just cut a small sliver of tape the width of the first ridge ....don't cover air intake holes.

Sharp box knife is what I used too cut syringe down ...lay on table with knife on top.... cut by rolling syr. back & forth kinda, ....careful ... cuts thru fast once started ....the trick is to get your cut as straight as possible,cuz it needs to sit "flush" on the little edge @ the bottom of batt connection.

In hindsight I think If I have to do this again ...I would cut the needle end first & leave just a little of the taper & then trim to make mouth piece fit tighter ...& then trim other end to length needed .....am I making any sense? feel free to PM me if not .........

 

[Adrena]

Funny kelley I have a 5 ml/cc BD oral syringe, lol the odds. All cut it up now. As you said tip dose not fit, neither dose the bottom without some glue. This is not a tight shove on fit here. Can I use superglue or is this not safe for juice/vaping?

Seriously I know we're here to help, and I have to say the china team need to stop using this plastic.

 

[kelleymcm]

yup I was amazed that I had one that fit too & I even had one that was for oral use only (lurelock would not fit) so it wasn't usable anyway ...but I did not need glue on battery end ?? just pushed it in there, I did fill it w/water and let sit ...just to see if it would leak ,b-4 trying ejuice ... neither leaked . Mine is pretty tight, won't spin on base or anything . I have taken it apart & cleaned & it fit right back in .

Did you check to see if it would leak ?

I would think super glue would be fine if you don't have any GV eco mod glue ... getting it apart to clean may be the next issue tho ....but then again I cleaned/dryburned my maxomizer w/out removing tube . So with these fat tubes it can be done with out harming/melting tube......

 

[Adrena]

Thanks Kelly:
I dryburned before it became a cool thing to do lol I never us water or vodka. This will leak for sure without glue. Not a lurelock Just some standard med syringe you get at wally world. GV is awesomeness Chris is replacing my vision even though it not his fault USPS is rough. I don't see me making a tank any time soon. lol, not good at this. But I'm definitely in the market to buy them. and GV has my #s.....

 

[StotheK]

Ok, so I'll have the full and lengthy review up on the site some time tomorrow. But here's a little sneak preview for everyone:

I'm a fan of giant cartomizers. I'm a fan of clear cartomizers. Put them together and you get a pretty nice cartomizer in my book. The Vision will likely give many tank mods a run for their money. These cartos are well built and produce respectable performance while allowing you to tote around a day's worth of juice (or a few hours if you're me).

 

[Adrena]

Seriously I know we're here to help, and I have to say the china team need to stop using this plastic.

Wait in light of new developments.... And at the risk of putting my foot in my mouth again....

Vision not the same team as ce2/ce3? Do you guys know how this teams plastics differ or if it is different?
I want to buy more visions now but wonder if the tube are made of the same stuff. Not to put more on you guys plate but I'd like to be reassured the tubes are better. Box you put the vision in was crushed to hay and back. I'm sure not much can handle USPS's abuse on packages....