WISMEC Reuleaux RX200 TC
- Thread starter USMCotaku
- Start date
- th_trl_thread_readers 0
- Status
To my knowledge Sony still makes the vtc4 and they're readily available. It's true however that there are many fakes. I've ordered batteries from Fasttech. It'll take a long time to get them though and it's not that much cheaper. In Europe (I assume you're there/here) I've ordered from akkuteile.de and eu.nkon.nl.
The vtc4 has a higher cdr than the vtc5 so if you want to go all the way to 200w get the former. If 180w max is ok (it's plenty) I'd recommend the LG hg2 or Samsung 30q. Both are 3000 mAh so they should give a lot longer runtime than the 2100 mAh Sonys.
Sent from my M7_PLUS using Tapatalk
MXJO 18650 Battery
Description
These are the newest version of the MXJO IMR Safe chemistry LiMN 3.7V rechargeable batteries in an 35A 18650 2500MAH size. These cells can handle high amperage and are safe to use in series / multi-cell applications. Can be charged with any LiIon battery charger with 4.2V output.
Specifications:
-Capacity:2500mAh
-Nominal Voltage : 3.7V
-Max continuous discharge :20A
-Max. Discharge Current : 35A
-Dimensions : 65*18.24MM (+/-0.05)mm
-Operating Discharge Temperature : -10 to 60 Degrees Celsius
-Standard Charge : CC/CV
-Cycle Life : > 500 cycles
-Weight : 65g
I don't see how the battery type had anything to do with what happened. We aren't being given an accurate story of the events leading up to the explosion. I'd love to know how pulling the door away from the mod could in any way lead to a battery venting. The magnets are reasonably strong, is it possible that the door twisted in the friend's hand and got pulled back toward the mod and punctured the wrapper? No idea if that would cause what happened.
Would really like some more details from them, you think more would have been described since they took the time to post that much..
My first proper alien and he's an idiot.
Looks like everyone here using LGs...are Samsung 25 greens not an option?
My first proper alien and he's an idiot.
The Samsung 25r are a good choice for the Reuleaux. It's just that the LG hg2 (and Samsung 30q) have 20% more capacity.
Sent from my M7_PLUS using Tapatalk
Been using them since I got my Reuleaux I marked them 1,2 & 3 charging them on external charger & rotate them every charge, meaning they go in this order:
1,2,3
3,1,2
2,3,1
Thanks..all I use are 25s in my devices so I'm comfortable with those..I keep em married, don't swap device use, labeled date of purchase & rotate often..
My first proper alien and he's an idiot.
I bought the rx200 as my first TC device and was going to get the segelei fuchai but got this for the TI support and third battery design.
I got it friday and used it all weekend in power mode with dual claptons in my aromamizer and it was great.
Tonight.....Wanting to try Titanium I made dual 10 wrap 3mm ID coils, lightly spaced and pulsed in at 8W in power mode. They were .25ohm and working fine. Switched to Ti mode. I then let them cool down and locked in the resistance, wicked them, and put the tank together and the mod just hits temp protection everytime.
I can set it at 200f or 600f....temp protection everytime.
Spent past 3 hours building TI coils and same temp protection issue. As soon as you hit the button it goes into temp protection.
Ive made sure there were no shorts, spread my coils, etc
I even updated firmware on the device to 1.07 and no changes.
What am I missing here?
Ive read to make sure wicks are saturated so slathered them well....same temp protection.
Kind of bummed out, I felt like I was missing out and just been using my reo for the last couple years. I wanted to switch it up and try TC.
Im at the point where I give up. The aromamizer is great with dual vertical claptons and thats what I have back in there. I feel like its a waste of time to even try TC again.
Am I the only one with this issue?
I got it friday and used it all weekend in power mode with dual claptons in my aromamizer and it was great.
Tonight.....Wanting to try Titanium I made dual 10 wrap 3mm ID coils, lightly spaced and pulsed in at 8W in power mode. They were .25ohm and working fine. Switched to Ti mode. I then let them cool down and locked in the resistance, wicked them, and put the tank together and the mod just hits temp protection everytime.
I can set it at 200f or 600f....temp protection everytime.
Spent past 3 hours building TI coils and same temp protection issue. As soon as you hit the button it goes into temp protection.
Ive made sure there were no shorts, spread my coils, etc
I even updated firmware on the device to 1.07 and no changes.
What am I missing here?
Ive read to make sure wicks are saturated so slathered them well....same temp protection.
Kind of bummed out, I felt like I was missing out and just been using my reo for the last couple years. I wanted to switch it up and try TC.
Im at the point where I give up. The aromamizer is great with dual vertical claptons and thats what I have back in there. I feel like its a waste of time to even try TC again.
Am I the only one with this issue?
I have only been using ni wire and mine has been ok. That being said i am picking up some ti wire this week to test. Haven't seen many folks mention ti specifically for their tc so not sure there. Hopefully someone will respond soon with experience using ti on theirs.
@deezdrama
I had the same issue 1st when I was testing SS coil, I removed the atty hit the fire button then put the atty back on hit the fire button again & hit yes for new coil it worked fine. Try it & report back.
I had the same issue 1st when I was testing SS coil, I removed the atty hit the fire button then put the atty back on hit the fire button again & hit yes for new coil it worked fine. Try it & report back.
I remember when I was having these issues in TC mode that it showed 200w in the corner. I thought this was odd but could of sworn I seen a review of this mod that mentioned wattage couldnt be changed when in TC mode..... Or was that the fuchai reviews I watched :O ?
Anyway...would that be the reason why? cause it was firing up at 200w in TC mode and it was too much? Can wattage be adjusted in TC mode?
Also it never asked if I changed my atty....
I didnt shut the mod off and back on after firmware update which was stupid of me, but I already got mad and ripped the Ti coils out and put my claptons back in
Ill have to wait to mess with it ...got work in the am.
Argggggg..... I wanted to be tempcontrolling at work tomorrow lol.
I run the pre built titanium TFV4 coil with no problems at all.
Sent from my SAMSUNG-SM-N915A using Tapatalk
Sent from my SAMSUNG-SM-N915A using Tapatalk
Just got mine today – love it when USPS delivers on Sunday! I’ve been using it only in wattage mode since I want to do the firmware update before using TC.
But even if this only did wattage it is well worth the price. The shape is perfect. It has the best in-the-hand feel of any mod I’ve used. While it has a good amount of weight to it, the shape keeps it perfectly balanced in my hand, and totally comfortable.
Best of all, I finally have a mod that won’t topple over when I inevitably hit it when it’s on my desk. The wide base, low center of gravity and heft keep it planted.
I’ve gone through two full tanks on my Goliath and the battery bar has not even budged from full. Granted, I’m running it at only 40 watts, but I’m still very pleased with battery life (running Samsung 25r’s).
But even if this only did wattage it is well worth the price. The shape is perfect. It has the best in-the-hand feel of any mod I’ve used. While it has a good amount of weight to it, the shape keeps it perfectly balanced in my hand, and totally comfortable.
Best of all, I finally have a mod that won’t topple over when I inevitably hit it when it’s on my desk. The wide base, low center of gravity and heft keep it planted.
I’ve gone through two full tanks on my Goliath and the battery bar has not even budged from full. Granted, I’m running it at only 40 watts, but I’m still very pleased with battery life (running Samsung 25r’s).
Lower your wattage.....4 clicks of the power button followed by up arrow or down arrow.....out of the box its set to 200 watts, which is probably way to high for your build
Sent with one hand, the other is busy vaping.
Already have, earlier. Its the mist accurate mod ive tested in Ti to date
Sent with one hand, the other is busy vaping.
I've been using Titanium wire exclusively in several tanks all on my Reuleaux RX 200. The coils are all 8 wrap 24 gauge Grade 1 wire and I haven't had a single problem except with the GEM atomizer which has a terrible positive contact design and doesn't work well with any TC device.
Duane
i dunno if someone already posted this but here's some more garbage:
probably because one of those overpriced rewrapped garbage c bin batts from MXJO was faulty.
probably because one of those overpriced rewrapped garbage c bin batts from MXJO was faulty.
- Status
Similar threads
