I sit at my computer a lot during the day for university, work, and to play games. A few years back, a lot of residue from vaping built up in my case. Didn’t notice until my GTX 1060 stopped working one day. Looked inside and the micro capacitors on the card were sitting in a bit of it and had corroded off the board.

Hypothetically, it shouldn’t have done that. It shouldn’t be conductive or corrosive from what I’ve read, but that’s what happened, honest truth.

Few weeks ago I was swapping out my motherboard and noticed there is once again a bit of residue build up on fans in the case. Not as bad as before. I cleaned it all out with rubbing alcohol.

Is there some kind of way I can prevent this residue from building up in the case? Just been trying to keep a window cracked and blow my vapor out the window.

Maybe some paper towel over the intake fan ports? It’ll reduce airflow I’m sure, but my components usually stay well under harmful temperatures. None of my frequently played games are very intensive.

Hi ECF,

Is there anyone still have this iTaste134 ?



It is the first with a rotating adjustable voltage/wattage wheel;

It is the first regulated mod styled like a Mech Mod, with a striking design and top-quality craftsmanship.

Comment and let us know your ideas about it.

Best Regards,
Innokin Team

Good News! Here comes Freemax’s first round of vape giveaways for ECF members, in response to Freemax launching the environmental protection "We vape, We save" campaign. With the initial concept of protecting the environment, now Freemax has released Freemax Onnix 20W Kit, a pod for all your vaping needs in the pod category. With OX Mesh Coil and OX DVC Coil, the Onnix Kit not only supports both RDL & MTL vaping modes, and the OX series coils are designed to be replaceable with a much longer lifespan. Moreover, Freemax is committed to consistently providing more OX series coil options with the latest technology. With one Onnix kit in hand, the user can always enjoy the upgrade of future technology at minimum cost and greatly reduce the frequencies of battery replacement, which is an effective way to protect the environment.



How to enter?
1. Which kind of pod systems would you choose, with replaceable coils or non-replaceable coils?
2. Is the Onnix 20W designed for MTL vaping or DTL vaping?
3. Invite your friends to join.

Note: This giveaway is from 27th, Mar to 9th, April to win one Freemax Onnix 20W Green Limited Edition. And you must be over 21.

Good luck to you all!

Drag x dual battery cannot see any pods anymore. working fine until now every pod i put in there is "check atomizer" pods work fine in my other drag mods. fixed it--one of the contact pins in mod was stuck down--got it spring up and works now

New bottle of liquid that I cannot get the top off of. I’ve had some before that were hard to remove for the first time but this one is impossible. The cap turns but doesn’t seem to engage when I push down. Any advice would be appreciated. Only thing I can think of is to (probably) destroy the top with pliers and pour it into a a new 7

The Earth is the only home that we humans can live on. Unfortunately, humans have not been taking care of the Earth over the years, which results in severe and unrecoverable damage to our only planet. Therefore, more and more people start to pay close attention to this situation, the awareness of protecting the environment is widely and quickly developed worldwide in recent years. Specifically, in order to protect the environment, it is critical for us to reduce the growing wastes of electronic devices.

As an alternative to traditional cigarettes, the vape device can greatly improve ocean pollution by reducing the usage of cigarette butts, which are one of the world's greatest sources of ocean pollution. But it comes with new issues such as increasing discarded coils, pods, parts, batteries and etc. However, very few vape companies will pay attention to what kind of consequence the over-consumption and inappropriate waste treatment methods of vape devices may bring to our environment.

Freemax takes the lead in the vape community to focus on how to vape companies should do to protect the environment. Inspired by the spirit of protecting the environment, Freemax having been designing and developing environmentally-friendly vape devices over the years. Meanwhile, Freemax will consistently devote itself to raise public awareness of protecting the environment as a part of the whole vape community.



With the initial concept of protecting the environment, now Freemax is about to release Freemax Onnix 20W Kit, a pod for all your vaping needs in the pod category. The name of Onnix 20W comes from “Our Only Planet Matters”. With OX Mesh Coil and OX DVC Coil, the Onnix Kit not only supports both RDL & MTL vaping modes, and the OX series coils are designed to be replaceable with a much longer lifespan. Moreover, Freemax is committed to consistently providing more OX series coil options with the latest technology. With an Onnix kit in hand, the user can always enjoy the upgrade of future technology at minimum cost and greatly reduce the frequencies of battery replacement, which is an effective way to protect the environment.

To encourage the right treatment methods of used vape devices, Freemax will hold various campaigns with the theme "We Vape, We Save!" at the launch of the Onnix 20W Kit. 1000 sets of Onnix 20w kit green limited edition are prepared as rewards for online rewards for spreading the concept of "We Vape, We Save!". And in vapor stores, 500,000 pieces of OX Coils are prepared for any vapers taking 5 pcs of used pods, pod coils, or disposables of all brands for the exchange of one piece of new Freemax OX Coil, first come, first served. For more info on the "We Vape, We Save!" campaign, you can always visit Freemax's official website at www. freemaxvape.com.



It is our aim to raise awareness of all vapers to pay attention to environmental protection by these campaigns. As a part of the vaping community, it is our duty to treat used vape devices in a proper way and get involved in environmental protection actions in our daily lives to reduce e-waste effectively. Freemax strongly believes that the "WE VAPE, WE SAVE!" campaign will play a leading role in advocating vaping in an environmentally-friendly way.

Our only planet matters and relies on everyone contributing their part to protect it. It is everyone's responsibility and as a part of the vaping community, Freemax is more than willing to do its part. Importantly, do remember that there is no "planet B" in the whole universe. Join Freemax now, and let's vaping in an environmental-friendly way.

So I just purchased the 70w version, part from the chipset difference is there any other differences. I’m looking at customising and have noticed a lot of panels etc suitable for the 70w aren’t suitable for the dna60 version. So I’m a tad confused.

Hi everyone
Been vaping for a while have a heap of mods mechs etc and about to venture down the BB rabbit burrow

OK, so I am an old fart who has depended on the ECF entirely (REOVille, Saloon, several e-liquid threads), and now I am thinking of swinging by the local vape shops to talk hardware.
Obviously, Kayfun (clones) will be discussed. Probably going to bring up Vapefly and Vandy Vape for MTL attachments. Will undoubtably take several bottom feed mods as well.
What else should crusty old farts who have been vaping longer than their store has existed try to convince the vape shop owner (manager) they should at least look into ?
Like it or not, they local B&M's just became out main source for hardware.

"A new peer-reviewed study published in the journal Toxicological Research & Application shows acute exposure of a 3D human bronchial tissue model to e-cigarette aerosol has minimal impact on gene expression compared to smoke from combustible cigarettes.

The research involved sub-cytotoxic exposure to cells in a 3D human bronchial model (MucilAirTM) to nicotine-containing vape aerosol, combustible cigarette smoke and fresh air control under strict laboratory conditions.

The highly sensitive Toxicity Testing in the Twenty-First Century (TT21C)-based technique allows researchers to gain a mechanistic understanding of the potential effects of exposure to vape aerosol and 3R4F (reference cigarette) smoke, without experiencing other processes that may be triggered by significantly higher exposures —.........."

Vape Aerosol Has Minimal Impact on Gene Expression in Human Lung Tissue Compared to Cigarette Smoke

Again we see the advantages of vaping over smoking - In fact in category after category time and time again, we see vaping to be much safer than smoking.

Anti-Vaping Xavier Becerra Is Now The US Health and Human Services Secretary - Vaping Post

This might be useful for some of you.

Last week I bought a wallet for my mech mod and it looks great!

Great stuff.

The wallet’s brand is Mayor Wallets, they have a website, Instagram and they are also on ebay. The name I find it funny, like a political joke.

On a 5 volt mechanical mod with 3 amp what should the resistance be? i figured 1.66 ohm. Please help am I correct ? How many wraps do I need with 28 gauge Kenthal A1 wire with 2 mm diameter spaced coil ? I appreciate if you guys help me out.

I'm experimenting using round wire on these coils... Anyone try this yet?
Login to view embedded media

Head to ejuice.deals - use code ban20 for 20% off juice.

If you haven't seen our earlier post re: PACT Act, I wanted to reiterate that we will continue accepting and shipping orders. You may see some increased shipping times, and prices will increase slightly due to the new admin costs for filing tax reports, etc etc..... So order ASAP to stock up and get the lowest prices before the ban.


Thanks for your support and have a great weekend!

I am pleased to present that Hopium is alive and well.

Big thank you to all the supporters of our hopium thread. A Glimmer of Hopium against the Vape Mail Ban

Vape business will continue as usual but you will see an increase in the shipping cost. This means that if you want lower-priced vapes you should still stock up before shipping prices increase. List of vendors below that will continue shipping. If you find more please add/share them with us.

Vendors:

1. Ecigmafia com - Source: Home page banner
2. Madvapes com - Source: Email Update shared by ECF Member
3. VaporDNA com - Source: Domestic Shipping – VaporDNA
4. Eightvape com - Source: Memo Re: Shipping Changes 2021
5. MyVpro com - Transition on April 2nd. Source: SHIPPING
6. Misthum com - Signatures after March 26th. Source: Pact Act Statement
7. ejuice .deals - working to find shipping network after April 26th. Source: PACT ACT - Ejuice Deals – eJuice.Deals.
8. MVS (My Vapor Store) - Source: Shipping and Handling Info | myvaporstore.com

Great Seller!
Quick Shipping!
Product as described!
Buy with confidence!

I have 2 rdas and squonk mods. The Ammit and the STNG. I am struggling building a coil that does not put juice into my mouth. I have 26 and 28 ga Kanthal wire. I have tried several different wraps, spaced and not spaced coils at 2.5. I have tried more cotton, less cotton. Tried different cottons. I have tried raising and lowering coil. I have tried different wattage settings. I have noticed with longer drip tips seems to stop the issue, but flavor is muted a bit. I have tried using both tanks as a dripper, removed squonk pin, same issue. I DIY, I mix at 60/40. I also have the Berserker mtl rda, no issues. Any suggestions?

The Vinci Pod Kit delivers an impressive vape experience for such a compact kit. It’s simple to use and has a stylish design with excellent build quality. It has an adjustable airflow ranging from restrictive DL to MTL, although it may not suit those that like incredibly tight draws. Overall one of the best pod kits currently on the market, especially with pre-installed coils.

The Voopoo Vinci pod is without a doubt one of the most compact pod devices. It measures 93.5x14x24mm, which is a damn sight shorter than some of its competitors like the Caliburn G and the Vinci Air, which came before it.

However, that diminutive size also means it packs a slightly smaller internal battery at 800mAh. It does have a couple of tricks up its sleeve to ensure that it will see you through a whole day without much hassle.




The Vinci pod’s main body is made from Zinc Alloy, which gives it a nice weight, adding to its premium feel. The metal is well coated and feels nice in the hand, as do the two side panels. Each of which has an oil and fingerprint-proof coating, which prevents glares, and it is also shockproof.

There are seven different color options currently available for the Vinci pod kit, each with an alternative colored body and pattern on the side panel. The ‘Aurora Silver’ version seems to affect the side panel pattern that changes color depending on the light and angle you view it from.



The rest of the design of the Vinci pod is pretty clean and straightforward. There’s the Vinci branding on the side, with a small ‘Gene’ logo towards the base. To keep things even cleaner, Voopoo has integrated the power status light to be behind the ‘Gene’ logo, which is a nice touch.

On the base of the device is a Type-C USB port for charging, but there are no buttons to fire the device as it’s only draw-activated. On the top side of the battery, you will notice a sliding switch which is to adjust airflow – that’s right, adjustable airflow in a compact Voopoo pod.

The Vinci pod kit is as simple as they come in design, but that simplicity brings a sleek design with excellent build quality.

Hi ECF,

Let’s throwback to another Innokin Classic Product today – iTaste VTR.
It is the first mass produced mod with side-by-side design & adjustable voltage and wattage.


Have you tried before? Comment below and let us know.

Best Regards,
Innokin Team

SMOK Morph Pod-40 Kit

Morph Pod-40 Kit is a stylish pod mod kit which has 2000mAh big battery capacity with 5-40W adjustable power. Designed with a large side fire key, it is not only easy and comfortable for you to press, but also aesthetic. Featuring adjustable airflow inlet on the top of device, it supports both MTL and DTL hit. Morph Pod-40 Kit contains 3.7ml Morph Pod-40 Pod and is compatible with all RPM Coils.

Details:

1. 5-40W adjustable power
2. 2000mAh battery capacity
3. Compatible with RPM Coils
4. Adjustable airflow, 0.91-inch OLED screen
5. 3.7ml RPM pod cartridge
6. Supports MTL and DTL vaping
7. Larger side fire key for easy and comfortable pressing
8. Arch design and comfortable grip
9. Improve UX for maximum convenience
10. Ergonomic mouthpiece for satisfying throat hit
11. Max 1.4A fast charging
12. Multiple protections: 8s Cut-off/Low Voltage Warning/Atomizer Recognition/Lithium-ion/Short Circuit/High Temperature Protection






Digiflavor Drop RDA V1.5

Drop RDA V1.5 is fit for BF Pin Squonk Mod. It is a dual coil 24mm diameter rebuildable dripper with a classic drop deck. The four large post holes are covered by knurled cap in a rectangular-shaped multi-airslot design. The dual post build deck frees up spaces for any size of coil structures, it allows for easy coil replacement and coil trimming, and boosts up more flavor-focused possibilities. The build deck of Drop RDA V1.5 is fully gold-plated for superior connectivity with dual-coil DIY system design for a user-friendly configuration.


Details:

1. Dual-coil DIY system, easy to build and cut the coil-feet
2. Multi-airslot airflow control for smooth flavor
3. Perfect airflow control for DL and RDL
4. 810 drip tip, 510 thread
5. Compatible with squonk mod by BF pin

Arcfox Kit contains Arcfox Box Mod and TFV18 Tank. The Arcfox Mod is a tri-proof box mod that powered by dual 18650 batteries with 5-230W wattage range. With large fire key and user-friendly 0.96-inch TFT screen, it can provide you convenient one-handed operation and high-efficient vaping experience. The mod supports VW mode (5W-230W) and TC mode (10W-80W), and you can adjust the current resistance, wattage and voltage to obtain accurate control over power and temperature. Adopting great chipset and type-c 2A fast charging port, Arcfox Kit will provide you safety, reliable and pleasant vaping. The TFV18 Tank has 7.5ml big e-juice capacity and features 5 braces on the base to efficiently transfer the power to the coil for circular and fast heating. It is compatible with TFV18 Coils and two TFV18 meshed coils are included in the package.

SMOK Arcfox Kit Giveaway, 1 winner, ends on Apr. 9th

Enter here

"
Researchers at the Center of Excellence for the Acceleration of Harm Reduction (CoEHAR*) in Catania, Italy have just published a groundbreaking study.
It shows that smokers with chronic obstructive pulmonary disease (COPD) who switched to vaping reduced their yearly flare-ups by about 50 percent, significantly improved their cardio-respiratory health, and increased both their ability to exercise and their quality of life.

The study, led by CoEHAR founder Dr. Riccardo Polosa, is vitally important because COPD, to which emphysema and chronic bronchitis commonly contribute, is devastating. It makes breathing difficult and causes symptoms of wheezing, fatigue, shortness of breath, and a chronic cough. Many patients end up on long-term, portable oxygen therapy as symptoms worsen.........."

https://regulatorwatch.com/reported...rom-smoking-to-vaping-see-long-term-benefits/