dna30

Looking for a vaporshark mod with built in battery or a lost vapes coral mod. pm me if you have one available for sale. thanks

One more for the Memorial Day weekend. This is my 2nd WAE II, and it's almost never been used. I have had one in play constantly for a very long time, and absolutely love the device. Smaller (21mm diameter) and about as light as a Provari Titanium, with a DNA30 chip. This one is in...

Looking for a ProVape V1. This is not the same as provari v1, this was a 2009 release, which was more or less an antique pod mod. It was fixed voltage, 14500 battery. ProVape-1 Starter Kit: The ProVape-1 Starter Kit was constructed of stainless steel and aluminum, used the battery state to...

So i have this Hana DNA30 v3 clone from FT, never had a problem with it. Used it around 7 months now. But the fire button just popped loose from the case and is damaged. Im good at doing, i just need the electrical advise. I want to replace the tiny dome tact switch with a 12-16mm blue LED...

:confused: I'm sitting here trying to repair a customers Asgard DNA30. The mod will only fire 3.0 to 3.1 volts on any wattage. i've checked the ground.. the positive and negative battery leads to the board.. the battery (by soldering leads to the leads coming off the board to a...

Soooo I put the battery in my VaporShark rDNA 30 backwards today (like a dummy, wasnt paying attention) and obviously the board fried. I've taken out the Samsung 25-R I was using and it doesn't seem to be taking a charge on an external charger. I know the DNA is shot, but did the battery get...

Hey guys, with the onset of the new rDNA40 coming out, does anyone know if the price or availability for the normal DNA30 will change? I've had my eye on the DNA30 for a bit now and am literally ready to order, but I can't help but feel like the focus is shifting to the new rDNA and will then...

I'm looking to buy either a dna or IStick to use with my kayfun as a daily vape. I'm planning to take it with me in my car to different places, so portability is kinda big for me. As of right now I'm not into dripping (tried it but didn't like constant having to put in juice). The real big issue...

My Sony battery had reached the end of its life cycle. I'm trying to decide between buying another VTC5 or going with the LGDBHE21865 35AMP. Has anyone experimented with both, and how man I tell which will perform better in my DNA30 device?

I just love boxes... I don't like having anything else in my had don't know why (probably cause I use to hold the box of cigarettes when I smoked) Any recommendations, I currently have a Kana dna everyone!!

I've got a VaporShark rDNA30 that I'm currently using a Sony VTC5 in. I'm wondering if higher MaH makes a difference in a regulated device. My build always comes out at .9 ohms and fires 5.1 volts at 30 watts. I was looking into 3600mah batteries and need to know if the performance would be...

Just got my hcigar dna 30 today and this thing is great! Such a step up from the mvp! Everything on it works as it should and no wonky parts :-) the difference between my stillare on this compared to my mvp is ridiculous. I remember when i forst used an ego and thought "box mods look...

I rebuilt my Protank II coil to 1.3 ohms using organic cotton. I threw is on my DNA30 box mod, and I was just wondering what is the highest wattage I should use with this tank. I don't know if there are any safety concerns with the heat being produced inside the tank. I've been vaping at around...

Sorry if this is an annoyingly newb and/or over asked/posted question -- is my first time in this sub -- but what is involved in making a high-power box? I'm thinking I need: a chip (is this the right one? ) copper wire solder and an iron a 510 piece from somewhere a battery holder some sort...

I am currently vaping a Hana modz clone that I though was one of the Clouper models without the logo, but every review or discussion I've noticed about them mentions a major con being the delay between pushing the button and actually being able to vape, due to the 'startup screen'. I have no...

The only soldering I have left to do is the main firing button and the up and down buttons. None of them are holes. Am I supposed to just solder the wire onto the surface? I haven't been able to find any pictures that show it wired up. I also noticed from pictures of the wires soldered to...

So I bought the above mentioned clone from fasttech (probably my first mistake, I know) and when I got the mod, coiled it and put it on my chana modz it wouldnt fire due to an apparent short. I saw a small burr on the center pin and sanded it off thinking it was causing a short some how-still...

I've got a few questions I need to have answered about batteries and APV'S. I'll apologize now if this is in the wrong place or if I come off as a total noob. I've tried to do my due diligence when it comes to battery safety in researching the best batteries for what device and storage, etc...

Not sure if they all of a sudden came back into stock but I remember not being able to find DNA boards. TheHouseOfVapor.com appears to have DNA30D boards in stock for $49.99. I figured I would give everybody a heads up just in case.

Thanks to jonniemac for the amazing work. box and pieces: V4 Stealth DNA Mod by jonniemac on Shapeways parts: dna30, dna charger, fatdaddy 510 connector, 1200mah round turnigy nano tech lipo, t3 torx screws and 2 philips screws for the door. so great not having to use a single drop...