Status
Not open for further replies.

naviathan

Ultra Member
ECF Veteran
Verified Member
May 24, 2010
1,172
62
Stella, NC
corepcsolutions.com
nav, do you order from ecigfair or royalsmokers? is ordering from e-liquid what is causing all this missing and wrong shipments? e-liquid can still ruin royalsmokers easily, please let them know nav. We know they're related, because royalsmokers actually sends people to e-liquid for ordering.

All the sites are related actually. ecigfair, e-liquid.cn and royalsmokers are all related and linked with Microcig. My orders are through e-liquid.cn.

e-liquid.cn is for individuals to purchase bulk quantities, royalsmokers is the original site started in 2006, microcig is the manufacturer and centraltrade.eu is for wholesalers and their original Royal customers.
 

v1John

Vaping Master
ECF Veteran
Mar 23, 2010
3,042
110
va
It's actually producing so much vapor, I really like that. And it's not even hot, using the 2.6 ohm on KR808d1 !

The taste is strange, it's almost like the flavor of smoke from a nearby galaxy. I don't really dislike it and will probably enjoy it.

This is distinctly the most vapor I've seen yet, I really like that, and there is no problem at all with the liquid working in the filler microtube.

Maybe it turned out good, if this is Dekang, I rate it a 10.5 VG, I have never had an e-liquid produce vapor like this. :thumb:
(and using it just like an analog)
 
Last edited:

badkolo

ECF Guru
ECF Veteran
Oct 17, 2009
11,274
21,917
Whitestone , New York USA
It's actually producing so much vapor, I really like that. And it's not even hot, using the 2.6 ohm on KR808d1 !

The taste is strange, it's almost like the flavor of smoke from a nearby galaxy. I don't really dislike it and will probably enjoy it.

This is distinctly the most vapor I've seen yet, I really like that, and there is no problem at all with the liquid working in the filler microtube.

Maybe it turned out good, if this is Dekang, I rate it a 10.5 VG, I have never had an e-liquid produce vapor like this. :thumb:
(and using it just like an analog)

yes but email them about thier F up with your order.

Ill be here waiting on your results as you play with them more.
 

v1John

Vaping Master
ECF Veteran
Mar 23, 2010
3,042
110
va
yes but email them about thier F up with your order.

Ill be here waiting on your results as you play with them more.

I did, I emailed them already, thanks.

PM sent, do you want one of these kr808d1 cartos? They're 2.6 ohm and they don't get hot, they're sealed and prefilled, they sent me some ry04 and some menthol
 
Last edited:

Scottbee

Vaping Master
ECF Veteran
Sep 18, 2009
3,610
41
Okauchee Lake, WI
If anybody has used these cartos with TV AC (Tasty Vapor Atomic Cinnacide) I'd be interested in their experience.

Nobody?

The reason I ask: it is my (somewhat firm) belief that the magic elixirs used in the AC juice have a negative effect on most plastic parts (and paint... that's a fact!). I was wondering if folks had tried the stuff with these cartos, and if so, did it tear up the plastic coil pot (or any other non-metallic materials).
 

naviathan

Ultra Member
ECF Veteran
Verified Member
May 24, 2010
1,172
62
Stella, NC
corepcsolutions.com
Nobody?

The reason I ask: it is my (somewhat firm) belief that the magic elixirs used in the AC juice have a negative effect on most plastic parts (and paint... that's a fact!). I was wondering if folks had tried the stuff with these cartos, and if so, did it tear up the plastic coil pot (or any other non-metallic materials).

Why would you vape a juice that eats paint!?!?!
 

naviathan

Ultra Member
ECF Veteran
Verified Member
May 24, 2010
1,172
62
Stella, NC
corepcsolutions.com
I don't personally.... but being that it is probably the most popular e-liquid out there, the question is worth asking.

Oh ok, wow...Lets just load up our cartos with straight paint thinner and see where it gets us... That's insane, I never knew that about that juice line.
(DISCLAIMER: Please do not actually try this! It was a joke! I do not promote or condone huffing paint or paint products!)
 

v1John

Vaping Master
ECF Veteran
Mar 23, 2010
3,042
110
va
It is, it's orange.

Here is something else I noticed.
I did get the looser coil, the loops are further apart.

The slits are wider also, and I cannot fill the carto like I used to without liquid seeping through the slits and down to the battery end threads sometimes. Maybe the slits should have been kept narrow.

The wick does not go through the slits, they have their own hole at the bottom of the slits. If (big if) the wick was being pinched at the cup inlets, then all that was needed may have been a cup with a thicker wick and/or a slightly bigger inlet hole.

Maybe the slits didn't needed changing, maybe just the coil made more loose?

...Not sure about any of this, but what do you all think?
 

naviathan

Ultra Member
ECF Veteran
Verified Member
May 24, 2010
1,172
62
Stella, NC
corepcsolutions.com
It is, it's orange.

Here is something else I noticed.
I did get the looser coil, the loops are further apart.

The slits are wider also, and I cannot fill the carto like I used to without liquid seeping through the slits and down to the battery end threads sometimes. Maybe the slits should have been kept narrow.

The wick does not go through the slits, they have their own hole at the bottom of the slits. If (big if) the wick was being pinched at the cup inlets, then all that was needed may have been a cup with a thicker wick and/or a slightly bigger inlet hole.

Maybe the slits didn't needed changing, maybe just the coil made more loose?

...Not sure about any of this, but what do you all think?

I know the slots were necessary. I've had great results by widening the slots on the older models. If you're dripping liquid in to fill it without the inner ring, then that's why it's getting in the cup. Happens every time I try to fill that way.
 

badkolo

ECF Guru
ECF Veteran
Oct 17, 2009
11,274
21,917
Whitestone , New York USA
I know the slots were necessary. I've had great results by widening the slots on the older models. If you're dripping liquid in to fill it without the inner ring, then that's why it's getting in the cup. Happens every time I try to fill that way.

i think your overfilling if its getting into the cup, i can do it fast everytime and it never leaks, i had that happen in the begining but then i realized not to fill it to the brim, stop when you see the juice rising to the rim then stop and raise your needle. it doesnt need to be right at the rim whcih will cause it to flood.

VJOHN how much wider are the slits compared to the SS ones i sent you becuase they dont need to be wider then that, they just needed the looser coil.
 

v1John

Vaping Master
ECF Veteran
Mar 23, 2010
3,042
110
va
I know the slots were necessary. I've had great results by widening the slots on the older models. If you're dripping liquid in to fill it without the inner ring, then that's why it's getting in the cup. Happens every time I try to fill that way.

Ok, that's interesting. No, I don't drip, the tool works well. I was just looking.

I think then that the cap is not something to be removed, that's very important. The location of the holes is also important. It looks like the holes can not be lined up with the coil or else the filler tube will hit the wick. Also, the 3 hole cap has a groove on the bottom that has to fit the cup all the way around, so this all could mean that the top should never be removed for any reason.
 

v1John

Vaping Master
ECF Veteran
Mar 23, 2010
3,042
110
va
I don't know, mine weren't. I know the liquid is a yellowish orange color.

That's right, it is, but you didn't have ry04 did you?

badkolo, I'm sending you one or two of these for checking purposes, but I don't know about the ry04, I was really expecting MBClassic, not just for me but a lot of smokers that I know.

When you get them rinse it out before use, unless you determine they're ok, but check them out all you want please
 

naviathan

Ultra Member
ECF Veteran
Verified Member
May 24, 2010
1,172
62
Stella, NC
corepcsolutions.com
i think your overfilling if its getting into the cup, i can do it fast everytime and it never leaks, i had that happen in the begining but then i realized not to fill it to the brim, stop when you see the juice rising to the rim then stop and raise your needle. it doesnt need to be right at the rim whcih will cause it to flood.

VJOHN how much wider are the slits compared to the SS ones i sent you becuase they dont need to be wider then that, they just needed the looser coil.

Oh I was filling it with a drip bottle. The drops are big enough with VG that as it rolls down the side the top of the drop would splash into the cup.
 
Status
Not open for further replies.

Users who are viewing this thread